diff mbox series

[v12,11/13] arm64: defconfig: Enable RP1 misc/clock/gpio drivers

Message ID 20250529135052.28398-11-andrea.porta@suse.com
State New
Headers show
Series Add support for RaspberryPi RP1 PCI device using a DT overlay | expand

Commit Message

Andrea della Porta May 29, 2025, 1:50 p.m. UTC 
Select the RP1 drivers needed to operate the PCI endpoint containing
several peripherals such as Ethernet and USB Controller. This chip is
present on RaspberryPi 5.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

Comments

Florian Fainelli May 30, 2025, 11:42 p.m. UTC | #1 
From: Florian Fainelli <f.fainelli@gmail.com>

On Thu, 29 May 2025 15:50:48 +0200, Andrea della Porta <andrea.porta@suse.com> wrote:
> Select the RP1 drivers needed to operate the PCI endpoint containing
> several peripherals such as Ethernet and USB Controller. This chip is
> present on RaspberryPi 5.
> 
> Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
> Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/defconfig-arm64/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5bb8f09422a2..f6e9bb2a3578 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -620,6 +620,7 @@  CONFIG_PINCTRL_QCS615=y
 CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
+CONFIG_PINCTRL_RP1=m
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
@@ -702,6 +703,7 @@  CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
+CONFIG_MISC_RP1=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
@@ -1299,6 +1301,7 @@  CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_RP1=m
 CONFIG_COMMON_CLK_RS9_PCIE=y
 CONFIG_COMMON_CLK_VC3=y
 CONFIG_COMMON_CLK_VC5=y