diff mbox series

[1/1] dt-bindings: input: touchscreen: convert tsc2007.txt to yaml format

Message ID 20250529193241.793678-1-Frank.Li@nxp.com
State New
Headers show
Series [1/1] dt-bindings: input: touchscreen: convert tsc2007.txt to yaml format | expand

Commit Message

Frank Li May 29, 2025, 7:32 p.m. UTC 
Convert tsc2007.txt to yaml format.

Additional changes:
- add pendown-gpio property to match existed dts.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../input/touchscreen/ti.tsc2007.yaml         | 75 +++++++++++++++++++
 .../bindings/input/touchscreen/tsc2007.txt    | 39 ----------
 2 files changed, 75 insertions(+), 39 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml
new file mode 100644
index 0000000000000..8bb4bc7df4faf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml
@@ -0,0 +1,75 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti.tsc2007.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments tsc2007 touchscreen controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: ti,tsc2007
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,x-plate-ohms:
+    description: X-plate resistance in ohms.
+
+  gpios: true
+
+  pendown-gpio: true
+
+  ti,max-rt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum pressure.
+
+  ti,fuzzx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      specifies the absolute input fuzz x value.
+      If set, it will permit noise in the data up to +- the value given to the fuzz
+      parameter, that is used to filter noise from the event stream.
+
+  ti,fuzzy:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies the absolute input fuzz y value.
+
+  ti,fuzzz:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies the absolute input fuzz z value.
+
+  ti,poll-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      how much time to wait (in milliseconds) before reading again the
+      values from the tsc2007.
+
+required:
+  - compatible
+  - reg
+  - ti,x-plate-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touch@49 {
+           compatible = "ti,tsc2007";
+           reg = <0x49>;
+           interrupt-parent = <&gpio4>;
+           interrupts = <0x0 0x8>;
+           gpios = <&gpio4 0 0>;
+           ti,x-plate-ohms = <180>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
deleted file mode 100644
index 210486a3fb11e..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
+++ /dev/null
@@ -1,39 +0,0 @@ 
-* Texas Instruments tsc2007 touchscreen controller
-
-Required properties:
-- compatible: must be "ti,tsc2007".
-- reg: I2C address of the chip.
-- ti,x-plate-ohms: X-plate resistance in ohms.
-
-Optional properties:
-- gpios: the interrupt gpio the chip is connected to (through the penirq pin).
-  The penirq pin goes to low when the panel is touched.
-  (see GPIO binding[1] for more details).
-- interrupts: (gpio) interrupt to which the chip is connected
-  (see interrupt binding[0]).
-- ti,max-rt: maximum pressure.
-- ti,fuzzx: specifies the absolute input fuzz x value.
-  If set, it will permit noise in the data up to +- the value given to the fuzz
-  parameter, that is used to filter noise from the event stream.
-- ti,fuzzy: specifies the absolute input fuzz y value.
-- ti,fuzzz: specifies the absolute input fuzz z value.
-- ti,poll-period: how much time to wait (in milliseconds) before reading again the
-  values from the tsc2007.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-		tsc2007@49 {
-			compatible = "ti,tsc2007";
-			reg = <0x49>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <0x0 0x8>;
-			gpios = <&gpio4 0 0>;
-			ti,x-plate-ohms = <180>;
-		};
-
-		/* ... */
-	};