diff mbox series

[1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml

Message ID 20250528222433.727633-1-Frank.Li@nxp.com
State New
Headers show
Series [1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml | expand

Commit Message

Frank Li May 28, 2025, 10:24 p.m. UTC
Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
imx23/imx28 use dual mode controller (spi and mmc). So default dts node
name use spi instead of mmc. The legancy reason, it use difference
compatible string to distringuish work mode (spi / mmc).

Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi@80010000 (fsl,imx23-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$'

Additional add clocks property.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 Documentation/devicetree/bindings/mmc/mxs-mmc.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index 32e512a68ed61..ca40ca92f858d 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -17,7 +17,7 @@  description: |
   and the properties used by the mxsmmc driver.
 
 allOf:
-  - $ref: mmc-controller.yaml
+  - $ref: mmc-controller-common.yaml#
 
 properties:
   compatible:
@@ -31,6 +31,9 @@  properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1