diff mbox series

[v1,1/2] PCI: qcom: Add equalization settings for 8.0 GT/s

Message ID 20250604091946.1890602-2-quic_ziyuzhan@quicinc.com
State New
Headers show
Series Add Equalization Settings for 8.0 GT/s and Add PCIe Lane Equalization Preset Properties for 8.0 GT/s and 16.0 GT/s | expand

Commit Message

Ziyue Zhang June 4, 2025, 9:19 a.m. UTC 
Adding lane equalization setting for 8.0 GT/s to enhance link stability
and fix AER correctable errors reported on some platforms (eg. SA8775P).

GEN3 and GEN4 require the same equalization setting. This setting is
programmed into a group of shadow registers, which can be switched to
configure equalization for different GEN speeds by writing 00b, 01b
to `RATE_SHADOW_SEL`.

Hence program equalization registers in a loop using link speed as index,
so that equalization setting can be programmed for both GEN3 and GEN4.

Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 drivers/pci/controller/dwc/pcie-designware.h  |  1 -
 drivers/pci/controller/dwc/pcie-qcom-common.c | 55 ++++++++++---------
 drivers/pci/controller/dwc/pcie-qcom-common.h |  2 +-
 drivers/pci/controller/dwc/pcie-qcom.c        |  3 +-
 4 files changed, 32 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index ce9e18554e42..388306991467 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -127,7 +127,6 @@ 
 #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE	BIT(16)
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT	24
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK	GENMASK(25, 24)
-#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT	0x1
 
 #define GEN3_EQ_CONTROL_OFF			0x8A8
 #define GEN3_EQ_CONTROL_OFF_FB_MODE		GENMASK(3, 0)
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c
index 3aad19b56da8..48040f20b29c 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-common.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.c
@@ -8,43 +8,46 @@ 
 #include "pcie-designware.h"
 #include "pcie-qcom-common.h"
 
-void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci)
+void qcom_pcie_common_set_equalization(struct dw_pcie *pci)
 {
 	u32 reg;
+	u16 i;
 
 	/*
 	 * GEN3_RELATED_OFF register is repurposed to apply equalization
-	 * settings at various data transmission rates through registers namely
-	 * GEN3_EQ_*. The RATE_SHADOW_SEL bit field of GEN3_RELATED_OFF
+	@@ -19,32 +21,34 @@ void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci)
 	 * determines the data rate for which these equalization settings are
 	 * applied.
 	 */
-	reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
-	reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
-	reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
-	reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
-			  GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT);
-	dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
+	for (i = PCIE_SPEED_8_0GT; i <= (pcie_link_speed[pci->max_link_speed] < PCIE_SPEED_32_0GT ?
+		 pcie_link_speed[pci->max_link_speed] : PCIE_SPEED_16_0GT); i++) {
+		reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
+		reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
+		reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
+		reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
+			  i - PCIE_SPEED_8_0GT);
+		dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
 
-	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
-	reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
-		GEN3_EQ_FMDC_N_EVALS |
-		GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
-		GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
-	reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
-		FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
-		FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
-		FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
-	dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
+		reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
+		reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
+			GEN3_EQ_FMDC_N_EVALS |
+			GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
+			GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
+		reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
+			FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
+			FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
+			FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
+		dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
 
-	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
-	reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
-		GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
-		GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
-		GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
-	dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
+		reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
+		reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
+			GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
+			GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
+			GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
+		dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
+	}
 }
-EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_equalization);
+EXPORT_SYMBOL_GPL(qcom_pcie_common_set_equalization);
 
 void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci)
 {
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.h b/drivers/pci/controller/dwc/pcie-qcom-common.h
index 7d88d29e4766..7f5ca2fd9a72 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-common.h
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.h
@@ -8,7 +8,7 @@ 
 
 struct dw_pcie;
 
-void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci);
+void qcom_pcie_common_set_equalization(struct dw_pcie *pci);
 void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci);
 
 #endif
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index c789e3f85655..51eac2dc6222 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -298,8 +298,9 @@  static int qcom_pcie_start_link(struct dw_pcie *pci)
 {
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 
+	qcom_pcie_common_set_equalization(pci);
+
 	if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT) {
-		qcom_pcie_common_set_16gt_equalization(pci);
 		qcom_pcie_common_set_16gt_lane_margining(pci);
 	}