diff mbox series

[RESEND,v2,5/5] dt-bindings: pinctrl: stm32: Add missing blank lines

Message ID 20250610152309.299438-6-antonio.borneo@foss.st.com
State Superseded
Headers show
Series STM32 pinctrl: Add mux function RSVD | expand

Commit Message

Antonio Borneo June 10, 2025, 3:23 p.m. UTC 
Separate the properties through a blank line.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
---
 .../bindings/pinctrl/st,stm32-pinctrl.yaml      | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 5d17d6487ae9c..961161c2ab62b 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -32,13 +32,16 @@  properties:
 
   '#address-cells':
     const: 1
+
   '#size-cells':
     const: 1
 
   ranges: true
+
   pins-are-numbered:
     $ref: /schemas/types.yaml#/definitions/flag
     deprecated: true
+
   hwlocks: true
 
   interrupts:
@@ -67,22 +70,29 @@  patternProperties:
     additionalProperties: false
     properties:
       gpio-controller: true
+
       '#gpio-cells':
         const: 2
+
       interrupt-controller: true
       '#interrupt-cells':
         const: 2
 
       reg:
         maxItems: 1
+
       clocks:
         maxItems: 1
+
       resets:
         maxItems: 1
+
       gpio-line-names: true
+
       gpio-ranges:
         minItems: 1
         maxItems: 16
+
       ngpios:
         description:
           Number of available gpios in a bank.
@@ -187,18 +197,25 @@  patternProperties:
 
           bias-disable:
             type: boolean
+
           bias-pull-down:
             type: boolean
+
           bias-pull-up:
             type: boolean
+
           drive-push-pull:
             type: boolean
+
           drive-open-drain:
             type: boolean
+
           output-low:
             type: boolean
+
           output-high:
             type: boolean
+
           slew-rate:
             description: |
               0: Low speed