| Message ID | 1483397719-22235-1-git-send-email-mike.leach@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Jan 02, 2017 at 10:55:19PM +0000, Mike Leach wrote: > Using perf record 'cyclacc' option in cs_etm event was not setting up cycle > accurate trace correctly. > > Corrects bit set in TRCCONFIGR to enable cycle accurate trace. > Programs TRCCCCTLR with a valid threshold value as required by ETMv4 spec. This look good - just a tiny blip below. > > Signed-off-by: Mike Leach <mike.leach@linaro.org> > --- > drivers/hwtracing/coresight/coresight-etm4x.c | 7 +++++-- > drivers/hwtracing/coresight/coresight-etm4x.h | 1 + > 2 files changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c > index 4db8d6a..07be032 100644 > --- a/drivers/hwtracing/coresight/coresight-etm4x.c > +++ b/drivers/hwtracing/coresight/coresight-etm4x.c > @@ -216,8 +216,11 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, > goto out; > > /* Go from generic option to ETMv4 specifics */ > - if (attr->config & BIT(ETM_OPT_CYCACC)) > - config->cfg |= ETMv4_MODE_CYCACC; > + if (attr->config & BIT(ETM_OPT_CYCACC)) { > + config->cfg |= BIT(4); > + /* TRM: Must program this for cycacc to work */ > + config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT; > + } > if (attr->config & BIT(ETM_OPT_TS)) > config->cfg |= ETMv4_MODE_TIMESTAMP; > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h > index ba8d3f8..8a62c6c 100644 > --- a/drivers/hwtracing/coresight/coresight-etm4x.h > +++ b/drivers/hwtracing/coresight/coresight-etm4x.h > @@ -146,6 +146,7 @@ > #define ETM_ARCH_V4 0x40 > #define ETMv4_SYNC_MASK 0x1F > #define ETM_CYC_THRESHOLD_MASK 0xFFF > +#define ETM_CYC_THRESHOLD_DEFAULT 256 If only to be consistent with the rest of the defines, please write this value in base-16. Thanks, Mathieu > #define ETMv4_EVENT_MASK 0xFF > #define ETM_CNTR_MAX_VAL 0xFFFF > #define ETM_TRACEID_MASK 0x3f > -- > 2.7.4 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 4db8d6a..07be032 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -216,8 +216,11 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, goto out; /* Go from generic option to ETMv4 specifics */ - if (attr->config & BIT(ETM_OPT_CYCACC)) - config->cfg |= ETMv4_MODE_CYCACC; + if (attr->config & BIT(ETM_OPT_CYCACC)) { + config->cfg |= BIT(4); + /* TRM: Must program this for cycacc to work */ + config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT; + } if (attr->config & BIT(ETM_OPT_TS)) config->cfg |= ETMv4_MODE_TIMESTAMP; diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index ba8d3f8..8a62c6c 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -146,6 +146,7 @@ #define ETM_ARCH_V4 0x40 #define ETMv4_SYNC_MASK 0x1F #define ETM_CYC_THRESHOLD_MASK 0xFFF +#define ETM_CYC_THRESHOLD_DEFAULT 256 #define ETMv4_EVENT_MASK 0xFF #define ETM_CNTR_MAX_VAL 0xFFFF #define ETM_TRACEID_MASK 0x3f
Using perf record 'cyclacc' option in cs_etm event was not setting up cycle accurate trace correctly. Corrects bit set in TRCCONFIGR to enable cycle accurate trace. Programs TRCCCCTLR with a valid threshold value as required by ETMv4 spec. Signed-off-by: Mike Leach <mike.leach@linaro.org> --- drivers/hwtracing/coresight/coresight-etm4x.c | 7 +++++-- drivers/hwtracing/coresight/coresight-etm4x.h | 1 + 2 files changed, 6 insertions(+), 2 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel