diff mbox series

[v4,3/3] bus: ts-nbus: use bitmap_set_value8()

Message ID 20250611-gpio-set-array-helper-v4-3-fb86a9b499ab@baylibre.com
State New
Headers show
Series bus: ts-nbus: use gpiod_multi_set_value_cansleep | expand

Commit Message

David Lechner June 11, 2025, 8:18 p.m. UTC 
Use bitmap_set_value8() instead of accessing the bitmap directly.

Accessing the bitmap directly is not considered good practice. We now
have a helper function that can be used instead, so let's use it.

The bitmap has to be zero-initialized now to avoid a compiler warning
since bitmap_set_value8() does read/modify/write rather than just the
write that this is replacing.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
v4 changes:
- Fix typo s/get/set/ in commit message
- Zero-initialize the bitmap to avoid compiler warning
---
 drivers/bus/ts-nbus.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index b4c9308caf0647a3261071d9527fffce77784af2..17540034e64a4e591ea61b0b4eef86a2081b02f5 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -10,6 +10,7 @@ 
  * TS-4600 SoM.
  */
 
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
@@ -105,9 +106,9 @@  static void ts_nbus_set_direction(struct ts_nbus *ts_nbus, int direction)
  */
 static void ts_nbus_reset_bus(struct ts_nbus *ts_nbus)
 {
-	DECLARE_BITMAP(values, 8);
+	DECLARE_BITMAP(values, 8) = { };
 
-	values[0] = 0;
+	bitmap_set_value8(values, byte, 0);
 
 	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
 	gpiod_set_value_cansleep(ts_nbus->csn, 0);
@@ -149,9 +150,9 @@  static int ts_nbus_read_byte(struct ts_nbus *ts_nbus, u8 *val)
  */
 static void ts_nbus_write_byte(struct ts_nbus *ts_nbus, u8 byte)
 {
-	DECLARE_BITMAP(values, 8);
+	DECLARE_BITMAP(values, 8) = { };
 
-	values[0] = byte;
+	bitmap_set_value8(values, byte, 8);
 
 	gpiod_multi_set_value_cansleep(ts_nbus->data, values);
 }