diff mbox series

[v4,1/3] bus: ts-nbus: validate ts,data-gpios array size

Message ID 20250611-gpio-set-array-helper-v4-1-fb86a9b499ab@baylibre.com
State New
Headers show
Series bus: ts-nbus: use gpiod_multi_set_value_cansleep | expand

Commit Message

David Lechner June 11, 2025, 8:18 p.m. UTC 
Add validation of ts,data-gpios array size during probe. The driver
later hard-codes 8 as the size of the array when using it, so we should
be validating that the array is actually that big to prevent possible
out of bounds accesses.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/bus/ts-nbus.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/bus/ts-nbus.c b/drivers/bus/ts-nbus.c
index 2328c48b9b1260e805c631f2aa7379d620084537..d3ee102a13893c83c50e41f7298821f4d7ae3487 100644
--- a/drivers/bus/ts-nbus.c
+++ b/drivers/bus/ts-nbus.c
@@ -48,6 +48,10 @@  static int ts_nbus_init_pdata(struct platform_device *pdev,
 		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->data),
 				     "failed to retrieve ts,data-gpio from dts\n");
 
+	if (ts_nbus->data->ndescs != 8)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "invalid number of ts,data-gpios\n");
+
 	ts_nbus->csn = devm_gpiod_get(&pdev->dev, "ts,csn", GPIOD_OUT_HIGH);
 	if (IS_ERR(ts_nbus->csn))
 		return dev_err_probe(&pdev->dev, PTR_ERR(ts_nbus->csn),