diff mbox series

[4/4] net: phy: qca807x: use new GPIO line value setter callbacks

Message ID 20250610-gpiochip-set-rv-net-v1-4-35668dd1c76f@linaro.org
State Superseded
Headers show
Series net: use new GPIO line value setter callbacks | expand

Commit Message

Bartosz Golaszewski June 10, 2025, 12:38 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/phy/qcom/qca807x.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 1af6b5ead74bf615ad155e396b0ecc6fe5636e8c..bc480710c2bd27d621dad3b5595f0a292a4c72c1 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -377,7 +377,7 @@  static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset)
 	return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val);
 }
 
-static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+static int qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
 {
 	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
 	u16 reg;
@@ -390,14 +390,12 @@  static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int valu
 	val |= QCA807X_GPIO_FORCE_EN;
 	val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
 
-	phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val);
+	return phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val);
 }
 
 static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value)
 {
-	qca807x_gpio_set(gc, offset, value);
-
-	return 0;
+	return qca807x_gpio_set(gc, offset, value);
 }
 
 static int qca807x_gpio(struct phy_device *phydev)
@@ -425,7 +423,7 @@  static int qca807x_gpio(struct phy_device *phydev)
 	gc->get_direction = qca807x_gpio_get_direction;
 	gc->direction_output = qca807x_gpio_dir_out;
 	gc->get = qca807x_gpio_get;
-	gc->set = qca807x_gpio_set;
+	gc->set_rv = qca807x_gpio_set;
 
 	return devm_gpiochip_add_data(dev, gc, priv);
 }