| Message ID | 20250616-eusb2-repeater-tuning-v1-1-9457ff0fbf75@fairphone.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/2] dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values | expand |
diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index d16a543a784887eabc69faae2233057c4554be31..27f064a71c9fb8cb60e8333fb285f0510a4af94f 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -39,21 +39,18 @@ properties: description: High-Speed disconnect threshold minimum: 0 maximum: 7 - default: 0 qcom,tune-usb2-amplitude: $ref: /schemas/types.yaml#/definitions/uint8 description: High-Speed transmit amplitude minimum: 0 maximum: 15 - default: 8 qcom,tune-usb2-preem: $ref: /schemas/types.yaml#/definitions/uint8 description: High-Speed TX pre-emphasis tuning minimum: 0 maximum: 7 - default: 5 required: - compatible
The reset default tuning value depends on the PMIC, so remove them from the doc since they're not accurate for all PMICs. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml | 3 --- 1 file changed, 3 deletions(-)