@@ -325,7 +325,7 @@ static void adv7511_set_link_config(struct adv7511 *adv7511,
adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
}
-static void adv7511_power_on(struct adv7511 *adv7511)
+static void __adv7511_power_on(struct adv7511 *adv7511)
{
adv7511->current_edid_segment = -1;
@@ -359,24 +359,30 @@ static void adv7511_power_on(struct adv7511 *adv7511)
* Most of the registers are reset during power down or when HPD is low.
*/
regcache_sync(adv7511->regmap);
+}
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+ __adv7511_power_on(adv7511);
if (adv7511->type == ADV7533)
adv7533_dsi_power_on(adv7511);
-
adv7511->powered = true;
}
-static void adv7511_power_off(struct adv7511 *adv7511)
+static void __adv7511_power_off(struct adv7511 *adv7511)
{
/* TODO: setup additional power down modes */
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
ADV7511_POWER_POWER_DOWN,
ADV7511_POWER_POWER_DOWN);
regcache_mark_dirty(adv7511->regmap);
+}
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+ __adv7511_power_off(adv7511);
if (adv7511->type == ADV7533)
adv7533_dsi_power_off(adv7511);
-
adv7511->powered = false;
}
In chasing down issues with EDID probing, I found some duplicated but incomplete logic used to power the chip on and off. This patch refactors the adv7511_power_on/off functions, so they can be used for internal needs. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: John Stultz <john.stultz@linaro.org> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) -- 2.7.4