diff mbox series

[v2,5/9] spi: zynqmp-gqspi: Support multiple buses

Message ID 20250616220054.3968946-6-sean.anderson@linux.dev
State New
Headers show
Series [v2,1/9] dt-bindings: spi: Add spi-buses property | expand

Commit Message

Sean Anderson June 16, 2025, 10 p.m. UTC 
Currently, selection of the upper/lower buses is determined by the
chipselect. Decouple this by allowing explicit bus selection through the
spi-buses property.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

Changes in v2:
- New

 drivers/spi/spi-zynqmp-gqspi.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 595b6dc10845..add5eea12153 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -465,13 +465,13 @@  static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
 	genfifoentry |= GQSPI_GENFIFO_MODE_SPI;
 
 	if (!is_high) {
-		if (!spi_get_chipselect(qspi, 0)) {
-			xqspi->genfifobus = GQSPI_GENFIFO_BUS_LOWER;
+		xqspi->genfifobus =
+			FIELD_PREP(GQSPI_GENFIFO_BUS_MASK, qspi->buses);
+		if (!spi_get_chipselect(qspi, 0))
 			xqspi->genfifocs = GQSPI_GENFIFO_CS_LOWER;
-		} else {
-			xqspi->genfifobus = GQSPI_GENFIFO_BUS_UPPER;
+		else
 			xqspi->genfifocs = GQSPI_GENFIFO_CS_UPPER;
-		}
+
 		genfifoentry |= xqspi->genfifobus;
 		genfifoentry |= xqspi->genfifocs;
 		genfifoentry |= GQSPI_GENFIFO_CS_SETUP;
@@ -1316,6 +1316,8 @@  static int zynqmp_qspi_probe(struct platform_device *pdev)
 		ctlr->num_chipselect = num_cs;
 	}
 
+	ctlr->num_buses = 2;
+	ctlr->flags = SPI_CONTROLLER_DEFAULT_BUS_IS_CS;
 	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
 	ctlr->mem_ops = &zynqmp_qspi_mem_ops;
 	ctlr->mem_caps = &zynqmp_qspi_mem_caps;