@@ -83,104 +83,6 @@
* The actual size is just 4K though 64K is reserved. Access to the
* unmapped reserved region results in a DECERR response.
*/
- etf@20010000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0 0x20010000 0 0x1000>;
-
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
- etf_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&main_funnel_out_port>;
- };
- };
-
- /* output port */
- port@1 {
- reg = <0>;
- etf_out_port: endpoint {
- remote-endpoint = <&replicator_in_port0>;
- };
- };
- };
- };
-
- tpiu@20030000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0 0x20030000 0 0x1000>;
-
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- power-domains = <&scpi_devpd 0>;
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
- };
- };
- };
-
- main-funnel@20040000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
- reg = <0 0x20040000 0 0x1000>;
-
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- main_funnel_out_port: endpoint {
- remote-endpoint = <&etf_in_port>;
- };
- };
-
- port@1 {
- reg = <0>;
- main_funnel_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&cluster0_funnel_out_port>;
- };
- };
-
- port@2 {
- reg = <1>;
- main_funnel_in_port1: endpoint {
- slave-mode;
- remote-endpoint = <&cluster1_funnel_out_port>;
- };
- };
-
- };
- };
-
- etr@20070000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0 0x20070000 0 0x1000>;
- iommus = <&smmu_etr 0>;
-
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- power-domains = <&scpi_devpd 0>;
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
- };
- };
- };
-
etm0: etm@22040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22040000 0 0x1000>;
@@ -351,43 +253,6 @@
};
};
- coresight-replicator {
- /*
- * Non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell".
- */
- compatible = "arm,coresight-replicator";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* replicator output ports */
- port@0 {
- reg = <0>;
- replicator_out_port0: endpoint {
- remote-endpoint = <&tpiu_in_port>;
- };
- };
-
- port@1 {
- reg = <1>;
- replicator_out_port1: endpoint {
- remote-endpoint = <&etr_in_port>;
- };
- };
-
- /* replicator input port */
- port@2 {
- reg = <0>;
- replicator_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&etf_out_port>;
- };
- };
- };
- };
-
sram: sram@2e000000 {
compatible = "arm,juno-sram-ns", "mmio-sram";
reg = <0x0 0x2e000000 0x0 0x8000>;
new file mode 100644
@@ -0,0 +1,150 @@
+ /*
+ * Juno trace infrastructure.
+ * Trace links and sinks and interconnections
+ * from clusters.
+ * Connections for Juno r0.
+ */
+ etf@20010000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20010000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* input port */
+ port@0 {
+ reg = <0>;
+ etf_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&main_funnel_out_port>;
+ };
+ };
+
+ /* output port */
+ port@1 {
+ reg = <0>;
+ etf_out_port: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+ };
+ };
+
+ tpiu@20030000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0 0x20030000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+
+ main-funnel@20040000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20040000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* output port */
+ port@0 {
+ reg = <0>;
+ main_funnel_out_port: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+
+ /* input ports */
+ port@1 {
+ reg = <0>;
+ main_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&cluster0_funnel_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ main_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&cluster1_funnel_out_port>;
+ };
+ };
+
+ port@3 {
+ reg = <2>;
+ main_funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&stm_out_port>;
+ };
+ };
+
+
+ };
+ };
+
+ etr@20070000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20070000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ port {
+ etr_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ coresight-replicator {
+ /*
+ * Non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
new file mode 100644
@@ -0,0 +1,250 @@
+ /*
+ * Juno trace infrastructure.
+ * Trace links and sinks and interconnections
+ * from clusters.
+ * Connections for Juno r1 and r2.
+ */
+ etf0@20010000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20010000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* input port */
+ port@0 {
+ reg = <0>;
+ etf0_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&main_funnel_out_port>;
+ };
+ };
+
+ /* output port */
+ port@1 {
+ reg = <0>;
+ etf0_out_port: endpoint {
+ remote-endpoint = <&csys2_funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ etf1@20140000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20140000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* input port */
+ port@0 {
+ reg = <0>;
+ etf1_in_port: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&csys1_funnel_out_port>;
+ };
+ };
+
+ /* output port */
+ port@1 {
+ reg = <0>;
+ etf1_out_port: endpoint {
+ remote-endpoint =
+ <&csys2_funnel_in_port1>;
+ };
+ };
+ };
+ };
+
+ csys1_funnel@20130000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20130000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* input port */
+ port@0 {
+ reg = <0>;
+ csys1_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&etf1_in_port>;
+ };
+ };
+
+ /* output port */
+ port@1 {
+ reg = <0>;
+ csys1_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint =
+ <&stm_out_port>;
+ };
+ };
+
+ };
+ };
+
+ csys2_funnel@20150000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20150000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* output port */
+ port@0 {
+ reg = <0>;
+ csys2_funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+
+ /* input ports */
+ port@1 {
+ reg = <0>;
+ csys2_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf0_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ csys2_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf1_out_port>;
+ };
+ };
+
+ };
+ };
+
+ tpiu@20030000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0 0x20030000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+
+ /*
+ * This is labelled cssys0 funnel in the Juno r1/r2 TRM
+ * Retain the name from r0 to maintain compatibility with common
+ * juno-base.dtsi
+ */
+ main-funnel@20040000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20040000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* output port */
+ port@0 {
+ reg = <0>;
+ main_funnel_out_port: endpoint {
+ remote-endpoint = <&etf0_in_port>;
+ };
+ };
+
+ /* input ports */
+ port@1 {
+ reg = <0>;
+ main_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&cluster0_funnel_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ main_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&cluster1_funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ etr@20070000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20070000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ port {
+ etr_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ coresight-replicator {
+ /*
+ * Non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&csys2_funnel_out_port>;
+ };
+ };
+ };
+ };
@@ -178,6 +178,7 @@
};
#include "juno-base.dtsi"
+ #include "juno-cs-r1r2.dtsi"
};
&memtimer {
@@ -178,6 +178,7 @@
};
#include "juno-base.dtsi"
+ #include "juno-cs-r1r2.dtsi"
};
&memtimer {
@@ -178,6 +178,7 @@
};
#include "juno-base.dtsi"
+ #include "juno-cs-r0.dtsi"
};
&etm0 {
The CoreSight support added for Juno is valid for only Juno r0. The Juno r1 and r2 variants have additional components and alternative connection routes between trace source and sinks. The CoreSight infrastructure external to the Cortex-Axx clusters, has been split into separate .dtsi include files for r0 and r1/r2 to correctly represent these variations. Signed-off-by: Mike Leach <mike.leach@linaro.org> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 135 ---------------- arch/arm64/boot/dts/arm/juno-cs-r0.dtsi | 150 ++++++++++++++++++ arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi | 250 ++++++++++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno-r1.dts | 1 + arch/arm64/boot/dts/arm/juno-r2.dts | 1 + arch/arm64/boot/dts/arm/juno.dts | 1 + 6 files changed, 403 insertions(+), 135 deletions(-) create mode 100644 arch/arm64/boot/dts/arm/juno-cs-r0.dtsi create mode 100644 arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel