@@ -14,6 +14,7 @@
#include <dt-bindings/mfd/dbx500-prcmu.h>
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ste-ab8500.h>
#include "skeleton.dtsi"
/ {
@@ -603,6 +604,11 @@
interrupt-controller;
#interrupt-cells = <2>;
+ ab8500_clock: ab8500-clock {
+ compatible = "stericsson,ab8500-clk";
+ #clock-cells = <1>;
+ };
+
ab8500_gpio: ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
gpio-controller;
@@ -686,6 +692,8 @@
ab8500-pwm {
compatible = "stericsson,ab8500-pwm";
+ clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "intclk";
};
ab8500-debugfs {
@@ -700,6 +708,9 @@
V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+ clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+ clock-names = "audioclk";
+
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
@@ -1095,6 +1106,14 @@
status = "disabled";
};
+ sound {
+ compatible = "stericsson,snd-soc-mop500";
+ stericsson,cpu-dai = <&msp1 &msp3>;
+ stericsson,audio-codec = <&codec>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "sysclk", "ulpclk", "intclk";
+ };
+
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
@@ -186,15 +186,6 @@
status = "okay";
};
- sound {
- compatible = "stericsson,snd-soc-mop500";
-
- stericsson,cpu-dai = <&msp1 &msp3>;
- stericsson,audio-codec = <&codec>;
- clocks = <&prcmu_clk PRCMU_SYSCLK>;
- clock-names = "sysclk";
- };
-
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
@@ -159,15 +159,6 @@
"", "", "", "", "", "", "", "";
};
- sound {
- compatible = "stericsson,snd-soc-mop500";
-
- stericsson,cpu-dai = <&msp1 &msp3>;
- stericsson,audio-codec = <&codec>;
- clocks = <&prcmu_clk PRCMU_SYSCLK>;
- clock-names = "sysclk";
- };
-
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
This adds the AB8500 clocks to the device tree using the new bindings from the clk subsystem, making audio work again. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/ste-href.dtsi | 9 --------- arch/arm/boot/dts/ste-snowball.dts | 9 --------- 3 files changed, 19 insertions(+), 18 deletions(-) -- 2.9.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel