@@ -86,7 +86,7 @@
* The actual size is just 4K though 64K is reserved. Access to the
* unmapped reserved region results in a DECERR response.
*/
- etf@20010000 {
+ etf@20010000 { /* ETF 0 */
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
@@ -100,7 +100,7 @@
/* input port */
port@0 {
reg = <0>;
- etf_in_port: endpoint {
+ etf0_in_port: endpoint {
slave-mode;
remote-endpoint = <&main_funnel_out_port>;
};
@@ -109,8 +109,7 @@
/* output port */
port@1 {
reg = <0>;
- etf_out_port: endpoint {
- remote-endpoint = <&replicator_in_port0>;
+ etf0_out_port: endpoint {
};
};
};
@@ -131,7 +130,8 @@
};
};
- main-funnel@20040000 {
+ /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/
+ main_funnel: funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
@@ -142,13 +142,15 @@
#address-cells = <1>;
#size-cells = <0>;
+ /* output port */
port@0 {
reg = <0>;
main_funnel_out_port: endpoint {
- remote-endpoint = <&etf_in_port>;
+ remote-endpoint = <&etf0_in_port>;
};
};
+ /* input ports */
port@1 {
reg = <0>;
main_funnel_in_port0: endpoint {
@@ -164,7 +166,6 @@
remote-endpoint = <&cluster1_funnel_out_port>;
};
};
-
};
};
@@ -198,7 +199,7 @@
};
};
- cluster0-funnel@220c0000 {
+ funnel@220c0000 { /* cluster0 funnel */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x220c0000 0 0x1000>;
@@ -262,7 +263,7 @@
};
};
- cluster1-funnel@230c0000 {
+ funnel@230c0000 { /* cluster1 funnel */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x230c0000 0 0x1000>;
@@ -385,7 +386,6 @@
reg = <0>;
replicator_in_port0: endpoint {
slave-mode;
- remote-endpoint = <&etf_out_port>;
};
};
};
@@ -202,3 +202,11 @@
&etm5 {
cpu = <&A53_3>;
};
+
+&etf0_out_port {
+ remote-endpoint = <&replicator_in_port0>;
+};
+
+&replicator_in_port0 {
+ remote-endpoint = <&etf0_out_port>;
+};
Currently the Coresight components are supported only on Juno r0 variant. In preparation to add support to Juno r1/r2 variants, this patch refactors the existing coresight device nodes so that r1/r2 support can be added easily. It also cleans up some of the device node names which were previously named so as they were confused as the labels rather than the node names. Reviewed-and-Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 20 ++++++++++---------- arch/arm64/boot/dts/arm/juno.dts | 8 ++++++++ 2 files changed, 18 insertions(+), 10 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html