| Message ID | 1485345118-3082-3-git-send-email-m.szyprowski@samsung.com |
|---|---|
| State | New |
| Headers | show |
| Series | Exynos5433/TM2: add clocks configuration for display subsystem | expand |
Hi Marek, On 2017년 01월 25일 20:51, Marek Szyprowski wrote: > Add initial clock configuration for display subsystem for Exynos5433 > based TM2/TM2e boards in device tree in order to avoid dependency on the > configuration left by the bootloader. This initial configuration is also > needed to ensure that display subsystem is operational if display power > domain gets turned off before clock controller is probed and the inital > clock configuration left by the bootloader saved. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 25 ++++++++++++++++++---- > 1 file changed, 21 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > index 13a0950b57e2..1b9a8a92a40c 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi > @@ -218,15 +218,32 @@ > }; > > &cmu_disp { > - assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, > + assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>, > <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, > + <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>, > + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, > + <&cmu_disp CLK_MOUT_SCLK_DSIM0>, > + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, > + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>, > + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>, > + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>, > + <&cmu_disp CLK_MOUT_DISP_PLL>, > + <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, > <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, > <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; > - assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, > - <0>, > + assigned-clock-parents = <0>, <0>, > + <&cmu_mif CLK_ACLK_DISP_333>, > + <&cmu_mif CLK_SCLK_DSIM0_DISP>, > + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, > + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, > + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>, > + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>, > + <&cmu_disp CLK_FOUT_DISP_PLL>, > + <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, > <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, > <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; > - assigned-clock-rates = <0>, <400000000>; > + assigned-clock-rates = <266000000>, <400000000>; The bootloader initialized the CLK_FOUT_DISP_PLL with 250000000. when checking the clock rate with clk_summary. But, the pll table for fout_disp_pll in clk-exynos5433.c doesn't include the entry for 250000000 rate. On this patch, I think you correct the frequency of CLK_FOUT_DISP_PLL. Before applying this patch: root@localhost:~# cat /sys/kernel/debug/clk/clk_summary | grep fout_disp_pll fout_disp_pll 1 1 250000000 0 0 After applying this patch: root@localhost:~# cat /sys/kernel/debug/clk/clk_summary | grep fout_disp_pll fout_disp_pll 1 1 266000000 0 0 > }; > > &cmu_fsys { > I checked the relationship between clocks and parent clocks on this patch with clock-exynos5433.c driver. Looks good to me. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> -- Best Regards, Chanwoo Choi Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Chanwoo, On 2017-01-26 03:03, Chanwoo Choi wrote: > On 2017년 01월 25일 20:51, Marek Szyprowski wrote: >> Add initial clock configuration for display subsystem for Exynos5433 >> based TM2/TM2e boards in device tree in order to avoid dependency on the >> configuration left by the bootloader. This initial configuration is also >> needed to ensure that display subsystem is operational if display power >> domain gets turned off before clock controller is probed and the inital >> clock configuration left by the bootloader saved. >> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> --- >> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 25 ++++++++++++++++++---- >> 1 file changed, 21 insertions(+), 4 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi >> index 13a0950b57e2..1b9a8a92a40c 100644 >> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi >> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi >> @@ -218,15 +218,32 @@ >> }; >> >> &cmu_disp { >> - assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, >> + assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>, >> <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, >> + <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>, >> + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, >> + <&cmu_disp CLK_MOUT_SCLK_DSIM0>, >> + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, >> + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>, >> + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>, >> + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>, >> + <&cmu_disp CLK_MOUT_DISP_PLL>, >> + <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, >> <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, >> <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; >> - assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, >> - <0>, >> + assigned-clock-parents = <0>, <0>, >> + <&cmu_mif CLK_ACLK_DISP_333>, >> + <&cmu_mif CLK_SCLK_DSIM0_DISP>, >> + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, >> + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, >> + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, >> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>, >> + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>, >> + <&cmu_disp CLK_FOUT_DISP_PLL>, >> + <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, >> <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, >> <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; >> - assigned-clock-rates = <0>, <400000000>; >> + assigned-clock-rates = <266000000>, <400000000>; > The bootloader initialized the CLK_FOUT_DISP_PLL with 250000000. > when checking the clock rate with clk_summary. > > But, the pll table for fout_disp_pll in clk-exynos5433.c > doesn't include the entry for 250000000 rate. > > On this patch, I think you correct the frequency of CLK_FOUT_DISP_PLL. > > Before applying this patch: > root@localhost:~# cat /sys/kernel/debug/clk/clk_summary | grep fout_disp_pll > fout_disp_pll 1 1 250000000 0 0 > > After applying this patch: > root@localhost:~# cat /sys/kernel/debug/clk/clk_summary | grep fout_disp_pll > fout_disp_pll 1 1 266000000 0 0 Thanks for pointing this out. I've checked once again and bootloader applies 250MHz to DISP PLL on TM2 and 278MHz on TM2e. 266MHz was working fine, but probably the bootloader's values are a bit more fine tuned for each board. I would like to apply exactly same values, so I will send v2 of this patchset. >> }; >> >> &cmu_fsys { >> > I checked the relationship between clocks and parent clocks on this patch > with clock-exynos5433.c driver. Looks good to me. > > Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> > Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 13a0950b57e2..1b9a8a92a40c 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -218,15 +218,32 @@ }; &cmu_disp { - assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, + assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>, <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>, + <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>, + <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>, + <&cmu_disp CLK_MOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>, <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>, <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>; - assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, - <0>, + assigned-clock-parents = <0>, <0>, + <&cmu_mif CLK_ACLK_DISP_333>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>, + <&cmu_disp CLK_FOUT_DISP_PLL>, + <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>, <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>; - assigned-clock-rates = <0>, <400000000>; + assigned-clock-rates = <266000000>, <400000000>; }; &cmu_fsys {
Add initial clock configuration for display subsystem for Exynos5433 based TM2/TM2e boards in device tree in order to avoid dependency on the configuration left by the bootloader. This initial configuration is also needed to ensure that display subsystem is operational if display power domain gets turned off before clock controller is probed and the inital clock configuration left by the bootloader saved. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 25 ++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html