@@ -18,6 +18,7 @@
#include <linux/serial.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -37,10 +38,16 @@
#define ASC_FIFO_SIZE 16
#define ASC_MAX_PORTS 8
+/* Pinctrl states */
+#define DEFAULT 0
+#define NO_HW_FLOWCTRL 1
+
struct asc_port {
struct uart_port port;
struct gpio_desc *rts;
struct clk *clk;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *states[2];
unsigned int hw_flow_control:1;
unsigned int force_m1:1;
};
@@ -694,6 +701,7 @@ static int asc_init_port(struct asc_port *ascport,
{
struct uart_port *port = &ascport->port;
struct resource *res;
+ int ret;
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
@@ -720,6 +728,27 @@ static int asc_init_port(struct asc_port *ascport,
WARN_ON(ascport->port.uartclk == 0);
clk_disable_unprepare(ascport->clk);
+ ascport->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(ascport->pinctrl)) {
+ ret = PTR_ERR(ascport->pinctrl);
+ dev_err(&pdev->dev, "Failed to get Pinctrl: %d\n", ret);
+ }
+
+ ascport->states[DEFAULT] =
+ pinctrl_lookup_state(ascport->pinctrl, "default");
+ if (IS_ERR(ascport->states[DEFAULT])) {
+ ret = PTR_ERR(ascport->states[DEFAULT]);
+ dev_err(&pdev->dev,
+ "Failed to look up Pinctrl state 'default': %d\n", ret);
+ return ret;
+ }
+
+ /* "no-hw-flowctrl" state is optional */
+ ascport->states[NO_HW_FLOWCTRL] =
+ pinctrl_lookup_state(ascport->pinctrl, "no-hw-flowctrl");
+ if (IS_ERR(ascport->states[NO_HW_FLOWCTRL]))
+ ascport->states[NO_HW_FLOWCTRL] = NULL;
+
return 0;
}
There are now 2 possible separate/different Pinctrl states which can be provided from platform data. One which encompasses the lines required for HW flow-control (CTS/RTS) and another which does not specify these lines, such that they can be used via GPIO mechanisms for manually toggling (i.e. from a request by `stty`). Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/tty/serial/st-asc.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html