diff mbox series

[RESEND,v2,41/53] mtd: nand: do not check R/B# for CMD_SET_FEATURES in nand_command(_lp)

Message ID 1490228282-10805-15-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit c5d664aa5a4c4b257a54eb35045031630d105f49
Headers show
Series None | expand

Commit Message

Masahiro Yamada March 23, 2017, 12:17 a.m. UTC
Set Features (0xEF) command toggles the R/B# pin after 4 sub feature
parameters are written.

Currently, nand_command(_lp) calls chip->dev_ready immediately after
the address cycle because NAND_CMD_SET_FEATURES falls into default:
label.  No wait is needed at this point.

If you see nand_onfi_set_features(), R/B# is already cared by the
chip->waitfunc call.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

Changes in v2:
  - Newly added

 drivers/mtd/nand/nand_base.c | 2 ++
 1 file changed, 2 insertions(+)

-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c4c3329..e13f959 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -669,6 +669,7 @@  static void nand_command(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_STATUS:
 	case NAND_CMD_READID:
+	case NAND_CMD_SET_FEATURES:
 		return;
 
 	case NAND_CMD_RESET:
@@ -788,6 +789,7 @@  static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 	case NAND_CMD_SEQIN:
 	case NAND_CMD_STATUS:
 	case NAND_CMD_READID:
+	case NAND_CMD_SET_FEATURES:
 		return;
 
 	case NAND_CMD_RNDIN: