diff mbox series

[08/12] arm64: dts: hikey960: add WL1837 Bluetooth device node

Message ID 20170517083745.24479-9-guodong.xu@linaro.org
State New
Headers show
Series arm64: dts: hi3660: add device nodes | expand

Commit Message

Guodong Xu May 17, 2017, 8:37 a.m. UTC
This adds the serial slave device for the WL1837 Bluetooth interface.

Signed-off-by: Guodong Xu <guodong.xu@linaro.org>

---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

-- 
2.10.2

Comments

Rob Herring (Arm) May 23, 2017, 12:45 a.m. UTC | #1
On Wed, May 17, 2017 at 04:37:41PM +0800, Guodong Xu wrote:
> This adds the serial slave device for the WL1837 Bluetooth interface.

> 

> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>

> ---

>  arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++

>  1 file changed, 11 insertions(+)

> 

> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts

> index 513c496..69aa207 100644

> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts

> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts

> @@ -9,6 +9,7 @@

>  

>  #include "hi3660.dtsi"

>  #include "hikey960-pinctrl.dtsi"

> +#include <dt-bindings/gpio/gpio.h>

>  

>  / {

>  	model = "HiKey960";

> @@ -55,6 +56,16 @@

>  	status = "okay";

>  };

>  

> +&uart4 {

> +	status = "okay";

> +	max-speed = <921600>;


This goes in the bluetooth node.

> +

> +	bluetooth {

> +		compatible = "ti,wl1837-st";

> +		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;

> +	};

> +};

> +

>  &uart6 {

>  	status = "okay";

>  };

> -- 

> 2.10.2

>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 513c496..69aa207 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -9,6 +9,7 @@ 
 
 #include "hi3660.dtsi"
 #include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "HiKey960";
@@ -55,6 +56,16 @@ 
 	status = "okay";
 };
 
+&uart4 {
+	status = "okay";
+	max-speed = <921600>;
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &uart6 {
 	status = "okay";
 };