diff mbox series

[Linaro-uefi,3/8] Platforms/AMD: remove /pmu node from Overdrive DTS

Message ID 20170406102941.14802-4-ard.biesheuvel@linaro.org
State New
Headers show
Series Platforms/AMD/Overdrive: switch to DtPlatformDxe | expand

Commit Message

Ard Biesheuvel April 6, 2017, 10:29 a.m. UTC
The /pmu node is removed and regenerated by the firmware, so there is
no need to have it in the template.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dtb | Bin 8089 -> 7973 bytes
 Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts |  12 ------------
 2 files changed, 12 deletions(-)
diff mbox series

Patch

diff --git a/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dtb b/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dtb
index 0c0468d89d60faf6c461b0e2e1c67098b063c7a9..ba4de560d279d79fde086c6e3f79626bd17a108f 100644
GIT binary patch
delta 89
zcmbPfztm3P0`I@K3=HzB3=9kw3=A?769vSWr5`X%e#0!a(fJ_L<{8YtnPi!PvMfMc
g3B<fW4CB{>_?suNsWUP1PTs*$&B(jigfmqP0JFdnn*aa+

delta 195
zcmZ2#H`89=0`I@K3=Hx!85kHW7#L)FCJKl#$%JgwxWiOmkXs5AWnczk0U%~eEXvgZ
z;xY?epiG%DOfCV)NC$C%fE|cgz$^v^4kR`w5}ON&&5gw7L1Oa)**q|V_<)?vznNH=
XH_NlBFflSucHyXIWZry$BUKClaGw{;

diff --git a/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts b/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts
index dab3c2c56ee5..3cb9a3128737 100644
--- a/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts
+++ b/Platforms/AMD/Styx/OverdriveBoard/FdtBlob/styx-overdrive.dts
@@ -55,18 +55,6 @@ 
                              <0x1 0xa 0xff04>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0x0 0x7 0x4>,
-                             <0x0 0x8 0x4>,
-                             <0x0 0x9 0x4>,
-                             <0x0 0xa 0x4>,
-                             <0x0 0xb 0x4>,
-                             <0x0 0xc 0x4>,
-                             <0x0 0xd 0x4>,
-                             <0x0 0xe 0x4>;
-	};
-
 	smb {
 		compatible = "simple-bus";
 		#address-cells = <0x2>;