| Message ID | 20230526145402.450-1-walker.chen@starfivetech.com |
|---|---|
| Headers | show |
| Series | Add TDM audio on StarFive JH7110 | expand |
On 2023/5/31 14:23, Hal Feng wrote: > On Fri, 26 May 2023 22:54:02 +0800, Walker Chen wrote: >> Add the tdm controller node and pins configuration of tdm for the >> StarFive JH7110 SoC. >> >> Signed-off-by: Walker Chen <walker.chen@starfivetech.com> >> --- >> .../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++++++++++ >> arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++++++ >> 2 files changed, 61 insertions(+) >> >> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> index 1155b97b593d..19b5954ee72d 100644 >> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi >> @@ -214,6 +214,40 @@ >> slew-rate = <0>; >> }; >> }; >> + >> + tdm0_pins: tdm0-pins { >> + tdm0-pins-tx { > > Use consistent naming, so > > tdm_pins: tdm-0 { > tx-pins { > >> + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, >> + GPOEN_ENABLE, >> + GPI_NONE)>; >> + bias-pull-up; >> + drive-strength = <2>; >> + input-disable; >> + input-schmitt-disable; >> + slew-rate = <0>; >> + }; >> + >> + tdm0-pins-rx { > > rx-pins { > >> + pinmux = <GPIOMUX(61, GPOUT_HIGH, >> + GPOEN_DISABLE, >> + GPI_SYS_TDM_RXD)>; >> + input-enable; >> + }; >> + >> + tdm0-pins-sync { > > sync-pins { > >> + pinmux = <GPIOMUX(63, GPOUT_HIGH, >> + GPOEN_DISABLE, >> + GPI_SYS_TDM_SYNC)>; >> + input-enable; >> + }; >> + >> + tdm0-pins-pcmclk { > > pcmclk-pins { > >> + pinmux = <GPIOMUX(38, GPOUT_HIGH, >> + GPOEN_DISABLE, >> + GPI_SYS_TDM_CLK)>; >> + input-enable; >> + }; >> + }; >> }; >> >> &uart0 { >> @@ -221,3 +255,9 @@ >> pinctrl-0 = <&uart0_pins>; >> status = "okay"; >> }; >> + >> +&tdm { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&tdm0_pins>; > > pinctrl-0 = <&tdm_pins>; > > Best regards, > Hal OK, I'll update these node's name in the next submit. Thanks. Best regards, Walker
On Fri, 26 May 2023 22:53:59 +0800, Walker Chen wrote: > This patchset adds TDM audio driver for the StarFive JH7110 SoC. The > first patch adds device tree binding for TDM module. The second patch > adds tdm driver support for JH7110 SoC. The last patch adds device tree > node and pins configuration of tdm to JH7110 dts. > > The series has been tested on the VisionFive 2 board by plugging an > audio expansion board. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/3] ASoC: dt-bindings: Add TDM controller bindings for StarFive JH7110 commit: d9afe0d36cc27dcacbcecf02fe803a30d544698c [2/3] ASoC: starfive: Add JH7110 TDM driver commit: fd4762b6b5cfa27bf44f5d624ce74b7dce4a479c All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark