Message ID | cover.1646578164.git.g@b4.vu |
---|---|
Headers | show |
Series | ALSA: scarlett2: Add "Standalone" switch | expand |
On Sun, 06 Mar 2022 16:20:40 +0100, Geoffrey D. Bennett wrote: > > Hi Takashi, > > I discovered an internal "standalone" switch on all the Scarlett Gen > 2/3 interfaces with internal mixers. After enabling this switch, the > interface will act as a standalone mixer (according to its previous > configuration) when not connected to a USB host. The interfaces come > from the factory with the switch off, and the vendor driver enables it > without question. This patch adds a new ALSA control to set the switch > on or off. > > This is the first configuration item that is common between the Gen 2 > and 3 interfaces but with a different offset, so the patch is in two > parts. The first patch allows for the same configuration item to have > a different offset between Gen 2/3 and the second patch adds the new > switch. > > Regards, > Geoffrey. > > Geoffrey D. Bennett (2): > ALSA: scarlett2: Split scarlett2_config_items[] into 3 sections > ALSA: scarlett2: Add support for the internal "standalone" switch Thanks, applied both patches now. Takashi