From patchwork Wed Aug 2 17:09:28 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivas Kandagatla X-Patchwork-Id: 109267 Delivered-To: patch@linaro.org Received: by 10.182.45.195 with SMTP id p3csp6474749obm; Wed, 2 Aug 2017 10:11:27 -0700 (PDT) X-Received: by 10.223.164.13 with SMTP id d13mr17049853wra.58.1501693887685; Wed, 02 Aug 2017 10:11:27 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1501693887; cv=none; d=google.com; s=arc-20160816; b=sz93J529HmPYBjwpeUqU6EBpfzaFvTVC8DuIKWNmR9ZQCK+5ZHliYv4a3uOiEVsrBK k7NkKVBBdyeVOlyDOGpcMH6THv7s7QcHgRx/ebChcnB13WICdBbj4+vzT+Ob8SIVmEwz AT8+8It8MAwQiemWeCmOcARf1Q0/TvtOkf0uXHtrAkOSQZ44xW910Li5XxPusXVZZ4XM I+lInBAvgVr20I+PmNEmfNLCM4Gg/gCMDNon3BqUvw96Fd1osX8FZM4nr1Sx9cbiVWXg SrNvIRjZfCeDEz2J0Xf+2Umf27C0Tq1xHNFMzpNhL73u9BnJpDy9kMy/iWWUSOt6CnIx EiOg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:mime-version :list-subscribe:list-help:list-post:list-archive:list-unsubscribe :list-id:precedence:subject:cc:references:in-reply-to:message-id :date:to:from:dkim-signature:delivered-to:arc-authentication-results; bh=qS8i9zbHLcT/XIWcDYvrkSKdq5NL/DcV6C9mobfjs/Y=; b=L3P+iKwzUZYpRgrFbdJa1aSk2MUWAV+qG84AdeZZx4I6lurfQVMlgS5jA9yW2mR8zj TyfcfLp9P43GifaAoxq/boAhyoeWcPlOxQ1tbd5hffVAbgtwqpioaAfBdq5pSoDenV+I qrQnk0+0FnUAa0WvivygZokdHnyXMQpNK/Iun/afJGDYZ2JK1qYKNoJKYsMqpqnyHdZ6 fRXbt16qHEjIOkk7VJXb6JruInJaLoZeOoKRkCS2DpcLCjd1bS5OsrXlbBhaO6CJJg3Q AL1GmKHjPwShmBrL0jj92y3N3A49g6i59KV2xM7NuTg5cgzc6uthNy05va7foenOZPDX 7YWQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.b=PisQEpDA; spf=pass (google.com: domain of alsa-devel-bounces@alsa-project.org designates 77.48.224.243 as permitted sender) smtp.mailfrom=alsa-devel-bounces@alsa-project.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from alsa0.perex.cz (alsa0.perex.cz. [77.48.224.243]) by mx.google.com with ESMTP id 44si32387222wrc.13.2017.08.02.10.11.27; Wed, 02 Aug 2017 10:11:27 -0700 (PDT) Received-SPF: pass (google.com: domain of alsa-devel-bounces@alsa-project.org designates 77.48.224.243 as permitted sender) client-ip=77.48.224.243; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.b=PisQEpDA; spf=pass (google.com: domain of alsa-devel-bounces@alsa-project.org designates 77.48.224.243 as permitted sender) smtp.mailfrom=alsa-devel-bounces@alsa-project.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from alsa0.perex.cz (localhost [127.0.0.1]) by alsa0.perex.cz (Postfix) with ESMTP id 9230E2673B5; Wed, 2 Aug 2017 19:10:09 +0200 (CEST) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id 6EA3F26737B; Wed, 2 Aug 2017 19:10:08 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on mail1.perex.cz X-Spam-Level: X-Spam-Status: No, score=0.6 required=5.0 tests=DKIM_SIGNED, RCVD_IN_DNSWL_NONE, RCVD_IN_MSPIKE_H3,RCVD_IN_MSPIKE_WL,RCVD_IN_SORBS_SPAM,SPF_PASS, T_DKIM_INVALID,URIBL_BLOCKED autolearn=disabled version=3.4.0 Received: from mail-it0-f49.google.com (mail-it0-f49.google.com [209.85.214.49]) by alsa0.perex.cz (Postfix) with ESMTP id C38A4267377 for ; Wed, 2 Aug 2017 19:09:52 +0200 (CEST) Received: by mail-it0-f49.google.com with SMTP id v127so28139857itd.0 for ; Wed, 02 Aug 2017 10:09:52 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=kd+pMGYg2iSsh4IMqTus4wJoXo/sJQVlCD24FM1fbl8=; b=PisQEpDA7jmeDnIaXZ8PAzqSWHd9fhYf6l1RaTTjQAlL5RMaWz72FSVLWItvxlyrS5 7Y4KIfNqj7c9X+4JEcYrjsa0C9FFLO3VNLFMzSsmUPRK9xPKVI4wFQJodUldEc4bXsVR ovIvFozZOUL0zZbYpXfSmf14KTkDg/hbvlQHo= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=kd+pMGYg2iSsh4IMqTus4wJoXo/sJQVlCD24FM1fbl8=; b=V7b6pSCa5W7BcKaxdDg/OZl/CGoD2QYXh50ZweImvMxmtpLVXQS9fcY/3/qkuFymGb 1c+ZUwpfqtQ8IbCGJjdITh8rCUwTpYtHZRVO+rp9JKBcX/WwWbDjSEW/KEeHnYhtK6nc 7oj95tsZ3mlhsETY8vv1msaPIAELLaLVKiWUKdHQyM0Wlx5Yl//uMu14OdPQwbK4gTVi HuqATYHAui1Xt5omKTFzDotv6YPaKnSAunmCUbMr1zu7OlQrSzB9sX/SgnzFcyGd27XU lADWjNSy9dHFqv7dRahyMvQEvV6J0+T6cDXn+ZjBoK0NCvlg6FUXjNy2iKDfP7V3TmYC nj3w== X-Gm-Message-State: AIVw110SscrvlnmGrYZ/WAAqIA4+frkN7Y9P6qWCJwDNk8eGH2G0w13U fWkFnPLKVbrHKRmr X-Received: by 10.36.125.11 with SMTP id b11mr6443367itc.47.1501693791252; Wed, 02 Aug 2017 10:09:51 -0700 (PDT) Received: from localhost.localdomain (static.8.26.4.46.clients.your-server.de. [46.4.26.8]) by smtp.gmail.com with ESMTPSA id u79sm2291222ita.24.2017.08.02.10.09.49 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 02 Aug 2017 10:09:50 -0700 (PDT) From: srinivas.kandagatla@linaro.org To: Mark Brown , Banajit Goswami , alsa-devel@alsa-project.org Date: Wed, 2 Aug 2017 19:09:28 +0200 Message-Id: <20170802170930.26083-5-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170802170930.26083-1-srinivas.kandagatla@linaro.org> References: <20170802170930.26083-1-srinivas.kandagatla@linaro.org> Cc: damien.riegel@savoirfairelinux.com, Patrick Lai , linux-kernel@vger.kernel.org, Takashi Iwai , Srinivas Kandagatla Subject: [alsa-devel] [PATCH v2 4/6] ASoC: codecs: msm8916-wcd-analog: add MBHC support X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org From: Srinivas Kandagatla MBHC (MultiButton Headset Control) support is available in pm8921 in two blocks, one to detect mechanical headset insertion and removal and other block to support headset type detection and 5 button detection and othe features like impedance calculation. This patch adds support to: 1> Support to NC and NO type of headset Jacks. 2> Mechanical insertion and detection of headset jack. 3> Detect a 3 pole Headphone and a 4 pole Headset. 4> Detect 5 buttons. Tested it on DB410c with Audio Mezz board with 4 pole and 3 pole headset/headphones. Signed-off-by: Srinivas Kandagatla --- .../bindings/sound/qcom,msm8916-wcd-analog.txt | 17 +- sound/soc/codecs/msm8916-wcd-analog.c | 378 +++++++++++++++++++++ 2 files changed, 394 insertions(+), 1 deletion(-) -- 2.9.3 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt index 05b67a1..38668ed 100644 --- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt @@ -31,9 +31,22 @@ Required properties - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. - Optional Properties: + - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons + detection on headset when the mbhc is powered up + by internal current source, this is a low power. + - qcom,mbhc-vthreshold-high: Array of 5 thresold voltages in mV for 5 buttons + detection on headset when mbhc is powered up + from micbias. - qcom,micbias-lvl: Voltage (mV) for Mic Bias +- qcom,hphl-jack-type-normally-open: boolean, present if hphl pin on jack is a + NO (Normally Open). If not specified, then + its assumed that hphl pin on jack is NC + (Normally Closed). +- qcom,gnd-jack-type-normally-open: boolean, present if gnd pin on jack is + NO (Normally Open). If not specified, then + its assumed that gnd pin on jack is NC + (Normally Closed). - qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor connected. - qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor @@ -49,6 +62,8 @@ spmi_bus { reg-names = "pmic-codec-core"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c index dec4978..04a2112 100644 --- a/sound/soc/codecs/msm8916-wcd-analog.c +++ b/sound/soc/codecs/msm8916-wcd-analog.c @@ -12,9 +12,20 @@ #include #include #include +#include #define CDC_D_REVISION1 (0xf000) #define CDC_D_PERPH_SUBTYPE (0xf005) +#define CDC_D_INT_EN_SET (0x015) +#define CDC_D_INT_EN_CLR (0x016) +#define MBHC_SWITCH_INT BIT(7) +#define MBHC_MIC_ELECTRICAL_INS_REM_DET BIT(6) +#define MBHC_BUTTON_PRESS_DET BIT(5) +#define MBHC_BUTTON_RELEASE_DET BIT(4) +#define CDC_DEF_INT_MASK (MBHC_SWITCH_INT | \ + MBHC_MIC_ELECTRICAL_INS_REM_DET | \ + MBHC_BUTTON_PRESS_DET | \ + MBHC_BUTTON_RELEASE_DET) #define CDC_D_CDC_RST_CTL (0xf046) #define RST_CTL_DIG_SW_RST_N_MASK BIT(7) #define RST_CTL_DIG_SW_RST_N_RESET 0 @@ -37,6 +48,8 @@ #define DIG_CLK_CTL_RXD1_CLK_EN BIT(0) #define DIG_CLK_CTL_RXD2_CLK_EN BIT(1) #define DIG_CLK_CTL_RXD3_CLK_EN BIT(2) +#define DIG_CLK_CTL_D_MBHC_CLK_EN_MASK BIT(3) +#define DIG_CLK_CTL_D_MBHC_CLK_EN BIT(3) #define DIG_CLK_CTL_TXD_CLK_EN BIT(4) #define DIG_CLK_CTL_NCP_CLK_EN_MASK BIT(6) #define DIG_CLK_CTL_NCP_CLK_EN BIT(6) @@ -132,8 +145,51 @@ #define MICB_1_INT_TX3_INT_PULLUP_EN_TX1N_TO_GND 0 #define CDC_A_MICB_2_EN (0xf144) +#define CDC_A_MICB_2_EN_ENABLE BIT(7) +#define CDC_A_MICB_2_PULL_DOWN_EN_MASK BIT(5) +#define CDC_A_MICB_2_PULL_DOWN_EN BIT(5) #define CDC_A_TX_1_2_ATEST_CTL_2 (0xf145) #define CDC_A_MASTER_BIAS_CTL (0xf146) +#define CDC_A_MBHC_DET_CTL_1 (0xf147) +#define CDC_A_MBHC_DET_CTL_L_DET_EN BIT(7) +#define CDC_A_MBHC_DET_CTL_GND_DET_EN BIT(6) +#define CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_INSERTION BIT(5) +#define CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_REMOVAL (0) +#define CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_MASK BIT(5) +#define CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_SHIFT (5) +#define CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_AUTO BIT(4) +#define CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_MANUAL BIT(3) +#define CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_MASK GENMASK(4, 3) +#define CDC_A_MBHC_DET_CTL_MBHC_BIAS_EN BIT(2) +#define CDC_A_MBHC_DET_CTL_2 (0xf150) +#define CDC_A_MBHC_DET_CTL_HS_L_DET_PULL_UP_CTRL_I_3P0 (BIT(7) | BIT(6)) +#define CDC_A_MBHC_DET_CTL_HS_L_DET_COMPA_CTRL_V0P9_VDD BIT(5) +#define CDC_A_PLUG_TYPE_MASK GENMASK(4, 3) +#define CDC_A_HPHL_PLUG_TYPE_NO BIT(4) +#define CDC_A_GND_PLUG_TYPE_NO BIT(3) +#define CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN_MASK BIT(0) +#define CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN BIT(0) +#define CDC_A_MBHC_FSM_CTL (0xf151) +#define CDC_A_MBHC_FSM_CTL_MBHC_FSM_EN BIT(7) +#define CDC_A_MBHC_FSM_CTL_MBHC_FSM_EN_MASK BIT(7) +#define CDC_A_MBHC_FSM_CTL_BTN_ISRC_CTRL_I_100UA (0x3 << 4) +#define CDC_A_MBHC_FSM_CTL_BTN_ISRC_CTRL_MASK GENMASK(6, 4) +#define CDC_A_MBHC_DBNC_TIMER (0xf152) +#define CDC_A_MBHC_DBNC_TIMER_BTN_DBNC_T_16MS BIT(3) +#define CDC_A_MBHC_DBNC_TIMER_INSREM_DBNC_T_256_MS (0x9 << 4) +#define CDC_A_MBHC_BTN0_ZDET_CTL_0 (0xf153) +#define CDC_A_MBHC_BTN1_ZDET_CTL_1 (0xf154) +#define CDC_A_MBHC_BTN2_ZDET_CTL_2 (0xf155) +#define CDC_A_MBHC_BTN3_CTL (0xf156) +#define CDC_A_MBHC_BTN4_CTL (0xf157) +#define CDC_A_MBHC_BTN_VREF_FINE_SHIFT (2) +#define CDC_A_MBHC_BTN_VREF_FINE_MASK GENMASK(4, 2) +#define CDC_A_MBHC_BTN_VREF_COARSE_MASK GENMASK(7, 5) +#define CDC_A_MBHC_BTN_VREF_COARSE_SHIFT (5) +#define CDC_A_MBHC_BTN_VREF_MASK (CDC_A_MBHC_BTN_VREF_COARSE_MASK | \ + CDC_A_MBHC_BTN_VREF_FINE_MASK) +#define CDC_A_MBHC_RESULT_1 (0xf158) +#define CDC_A_MBHC_RESULT_1_BTN_RESULT_MASK GENMASK(4, 0) #define CDC_A_TX_1_EN (0xf160) #define CDC_A_TX_2_EN (0xf161) #define CDC_A_TX_1_2_TEST_CTL_1 (0xf162) @@ -217,16 +273,37 @@ #define MSM8916_WCD_ANALOG_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S24_LE) +int btn_mask = SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_BTN_4; +int hs_jack_mask = SND_JACK_HEADPHONE | SND_JACK_HEADSET; + static const char * const supply_names[] = { "vdd-cdc-io", "vdd-cdc-tx-rx-cx", }; +#define MBHC_MAX_BUTTONS (5) + struct pm8916_wcd_analog_priv { u16 pmic_rev; u16 codec_version; + int mbhc_sw_irq; + int mbhc_btn_press_irq; + int mbhc_btn_release_irq; + bool mbhc_btn_enabled; + /* special event to detect accessory type */ + bool mbhc_btn0_pressed; + bool detect_accessory_type; struct clk *mclk; + struct snd_soc_codec *codec; struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; + struct snd_soc_jack *jack; + bool hphl_jack_type_normally_open; + bool gnd_jack_type_normally_open; + /* Voltage threshold when internal current source of 100uA is used */ + u32 vref_btn_cs[MBHC_MAX_BUTTONS]; + /* Voltage threshold when microphone bias is ON */ + u32 vref_btn_micb[MBHC_MAX_BUTTONS]; unsigned int micbias1_cap_mode; unsigned int micbias2_cap_mode; unsigned int micbias_mv; @@ -366,6 +443,93 @@ static int pm8916_wcd_analog_enable_micbias_int1(struct wcd->micbias1_cap_mode); } +static void pm8916_wcd_setup_mbhc(struct pm8916_wcd_analog_priv *wcd) +{ + struct snd_soc_codec *codec = wcd->codec; + u32 plug_type = 0; + + snd_soc_write(codec, CDC_A_MBHC_DET_CTL_1, + CDC_A_MBHC_DET_CTL_L_DET_EN | + CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_INSERTION | + CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_AUTO | + CDC_A_MBHC_DET_CTL_MBHC_BIAS_EN); + + if (wcd->hphl_jack_type_normally_open) + plug_type |= CDC_A_HPHL_PLUG_TYPE_NO; + + if (wcd->gnd_jack_type_normally_open) + plug_type |= CDC_A_GND_PLUG_TYPE_NO; + + snd_soc_write(codec, CDC_A_MBHC_DET_CTL_2, + CDC_A_MBHC_DET_CTL_HS_L_DET_PULL_UP_CTRL_I_3P0 | + CDC_A_MBHC_DET_CTL_HS_L_DET_COMPA_CTRL_V0P9_VDD | + plug_type | + CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN); + + + snd_soc_write(codec, CDC_A_MBHC_DBNC_TIMER, + CDC_A_MBHC_DBNC_TIMER_INSREM_DBNC_T_256_MS | + CDC_A_MBHC_DBNC_TIMER_BTN_DBNC_T_16MS); + + /* enable MBHC clock */ + snd_soc_update_bits(codec, CDC_D_CDC_DIG_CLK_CTL, + DIG_CLK_CTL_D_MBHC_CLK_EN_MASK, + DIG_CLK_CTL_D_MBHC_CLK_EN); + + snd_soc_update_bits(codec, CDC_D_INT_EN_CLR, CDC_DEF_INT_MASK, 0); + snd_soc_update_bits(codec, CDC_D_INT_EN_SET, CDC_DEF_INT_MASK, + CDC_DEF_INT_MASK); + wcd->mbhc_btn0_pressed = false; + wcd->detect_accessory_type = true; +} + +static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv, + bool micbias2_enabled) +{ + struct snd_soc_codec *codec = priv->codec; + u32 coarse, fine, reg_val, reg_addr; + int *vrefs, i; + + if (!micbias2_enabled) { /* use internal 100uA Current source */ + /* Enable internal 2.2k Internal Rbias Resistor */ + snd_soc_update_bits(codec, CDC_A_MICB_1_INT_RBIAS, + MICB_1_INT_TX2_INT_RBIAS_EN_MASK, + MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE); + /* Remove pull down on MIC BIAS2 */ + snd_soc_update_bits(codec, CDC_A_MICB_2_EN, + CDC_A_MICB_2_PULL_DOWN_EN_MASK, + 0); + /* enable 100uA internal current source */ + snd_soc_update_bits(codec, CDC_A_MBHC_FSM_CTL, + CDC_A_MBHC_FSM_CTL_BTN_ISRC_CTRL_MASK, + CDC_A_MBHC_FSM_CTL_BTN_ISRC_CTRL_I_100UA); + } + snd_soc_update_bits(codec, CDC_A_MBHC_FSM_CTL, + CDC_A_MBHC_FSM_CTL_MBHC_FSM_EN_MASK, + CDC_A_MBHC_FSM_CTL_MBHC_FSM_EN); + + if (micbias2_enabled) + vrefs = &priv->vref_btn_micb[0]; + else + vrefs = &priv->vref_btn_cs[0]; + + /* program vref ranges for all the buttons */ + reg_addr = CDC_A_MBHC_BTN0_ZDET_CTL_0; + for (i = 0; i < MBHC_MAX_BUTTONS; i++) { + /* split mv in to coarse parts of 100mv & fine parts of 12mv */ + coarse = (vrefs[i] / 100); + fine = ((vrefs[i] % 100) / 12); + reg_val = (coarse << CDC_A_MBHC_BTN_VREF_COARSE_SHIFT) | + (fine << CDC_A_MBHC_BTN_VREF_FINE_SHIFT); + snd_soc_update_bits(codec, reg_addr, + CDC_A_MBHC_BTN_VREF_MASK, + reg_val); + reg_addr++; + } + + return 0; +} + static int pm8916_wcd_analog_enable_micbias_int2(struct snd_soc_dapm_widget *w, struct snd_kcontrol @@ -374,6 +538,15 @@ static int pm8916_wcd_analog_enable_micbias_int2(struct struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec); + switch (event) { + case SND_SOC_DAPM_POST_PMU: + pm8916_mbhc_configure_bias(wcd, true); + break; + case SND_SOC_DAPM_POST_PMD: + pm8916_mbhc_configure_bias(wcd, false); + break; + } + return pm8916_wcd_analog_enable_micbias_int(codec, event, w->reg, wcd->micbias2_cap_mode); } @@ -541,9 +714,14 @@ static int pm8916_wcd_analog_probe(struct snd_soc_codec *codec) snd_soc_write(codec, wcd_reg_defaults_2_0[reg].reg, wcd_reg_defaults_2_0[reg].def); + priv->codec = codec; + snd_soc_update_bits(codec, CDC_D_CDC_RST_CTL, RST_CTL_DIG_SW_RST_N_MASK, RST_CTL_DIG_SW_RST_N_REMOVE_RESET); + + pm8916_wcd_setup_mbhc(priv); + return 0; } @@ -742,11 +920,128 @@ static const struct snd_soc_dapm_widget pm8916_wcd_analog_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("A_MCLK2", CDC_D_CDC_TOP_CLK_CTL, 3, 0, NULL, 0), }; +static int pm8916_wcd_analog_set_jack(struct snd_soc_codec *codec, + struct snd_soc_jack *jack, + void *data) +{ + struct pm8916_wcd_analog_priv *wcd = snd_soc_codec_get_drvdata(codec); + + wcd->jack = jack; + + return 0; +} + static struct regmap *pm8916_get_regmap(struct device *dev) { return dev_get_regmap(dev->parent, NULL); } +static irqreturn_t mbhc_btn_release_irq_handler(int irq, void *arg) +{ + struct pm8916_wcd_analog_priv *priv = arg; + + if (priv->detect_accessory_type) { + struct snd_soc_codec *codec = priv->codec; + u32 val = snd_soc_read(codec, CDC_A_MBHC_RESULT_1); + + /* check if its BTN0 thats released */ + if ((val >= 0) && !(val & CDC_A_MBHC_RESULT_1_BTN_RESULT_MASK)) + priv->mbhc_btn0_pressed = false; + + } else { + snd_soc_jack_report(priv->jack, 0, btn_mask); + } + + return IRQ_HANDLED; +} + +static irqreturn_t mbhc_btn_press_irq_handler(int irq, void *arg) +{ + struct pm8916_wcd_analog_priv *priv = arg; + struct snd_soc_codec *codec = priv->codec; + u32 btn_result; + + btn_result = snd_soc_read(codec, CDC_A_MBHC_RESULT_1) & + CDC_A_MBHC_RESULT_1_BTN_RESULT_MASK; + + switch (btn_result) { + case 0xf: + snd_soc_jack_report(priv->jack, SND_JACK_BTN_4, btn_mask); + break; + case 0x7: + snd_soc_jack_report(priv->jack, SND_JACK_BTN_3, btn_mask); + break; + case 0x3: + snd_soc_jack_report(priv->jack, SND_JACK_BTN_2, btn_mask); + break; + case 0x1: + snd_soc_jack_report(priv->jack, SND_JACK_BTN_1, btn_mask); + break; + case 0x0: + /* handle BTN_0 specially for type detection */ + if (priv->detect_accessory_type) + priv->mbhc_btn0_pressed = true; + else + snd_soc_jack_report(priv->jack, + SND_JACK_BTN_0, btn_mask); + break; + default: + dev_err(codec->dev, + "Unexpected button press result (%x)", btn_result); + break; + } + + return IRQ_HANDLED; +} + + +static irqreturn_t pm8916_mbhc_switch_irq_handler(int irq, void *arg) +{ + struct pm8916_wcd_analog_priv *priv = arg; + struct snd_soc_codec *codec = priv->codec; + bool micbias_enabled = false; + bool ins = false; + + if (snd_soc_read(codec, CDC_A_MBHC_DET_CTL_1) & + CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_MASK) + ins = true; + + /* Set the detection type appropriately */ + snd_soc_update_bits(codec, CDC_A_MBHC_DET_CTL_1, + CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_MASK, + (!ins << CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_SHIFT)); + + + if (ins) { /* hs insertion */ + if (snd_soc_read(codec, CDC_A_MICB_2_EN) & + CDC_A_MICB_2_EN_ENABLE) + micbias_enabled = true; + + pm8916_mbhc_configure_bias(priv, micbias_enabled); + + /* + * if only a btn0 press event is receive just before + * insert event then its a 3 pole headphone else if + * both press and release event received then its + * a headset. + */ + if (priv->mbhc_btn0_pressed) + snd_soc_jack_report(priv->jack, + SND_JACK_HEADPHONE, hs_jack_mask); + else + snd_soc_jack_report(priv->jack, + SND_JACK_HEADSET, hs_jack_mask); + + priv->detect_accessory_type = false; + + } else { /* removal */ + snd_soc_jack_report(priv->jack, 0, hs_jack_mask); + priv->detect_accessory_type = true; + } + + return IRQ_HANDLED; +} + static struct snd_soc_dai_driver pm8916_wcd_analog_dai[] = { [0] = { .name = "pm8916_wcd_analog_pdm_rx", @@ -775,6 +1070,7 @@ static struct snd_soc_dai_driver pm8916_wcd_analog_dai[] = { static struct snd_soc_codec_driver pm8916_wcd_analog = { .probe = pm8916_wcd_analog_probe, .remove = pm8916_wcd_analog_remove, + .set_jack = pm8916_wcd_analog_set_jack, .get_regmap = pm8916_get_regmap, .component_driver = { .controls = pm8916_wcd_analog_snd_controls, @@ -789,6 +1085,7 @@ static struct snd_soc_codec_driver pm8916_wcd_analog = { static int pm8916_wcd_analog_parse_dt(struct device *dev, struct pm8916_wcd_analog_priv *priv) { + int rval; if (of_property_read_bool(dev->of_node, "qcom,micbias1-ext-cap")) priv->micbias1_cap_mode = MICB_1_EN_EXT_BYP_CAP; @@ -803,6 +1100,34 @@ static int pm8916_wcd_analog_parse_dt(struct device *dev, of_property_read_u32(dev->of_node, "qcom,micbias-lvl", &priv->micbias_mv); + if (of_property_read_bool(dev->of_node, + "qcom,hphl-jack-type-normally-open")) + priv->hphl_jack_type_normally_open = true; + else + priv->hphl_jack_type_normally_open = false; + + if (of_property_read_bool(dev->of_node, + "qcom,gnd-jack-type-normally-open")) + priv->gnd_jack_type_normally_open = true; + else + priv->gnd_jack_type_normally_open = false; + + priv->mbhc_btn_enabled = true; + rval = of_property_read_u32_array(dev->of_node, + "qcom,mbhc-vthreshold-low", + &priv->vref_btn_cs[0], + MBHC_MAX_BUTTONS); + if (rval < 0) + priv->mbhc_btn_enabled = false; + else { + rval = of_property_read_u32_array(dev->of_node, + "qcom,mbhc-vthreshold-high", + &priv->vref_btn_micb[0], + MBHC_MAX_BUTTONS); + if (rval < 0) + priv->mbhc_btn_enabled = false; + } + return 0; } @@ -842,6 +1167,59 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev) return ret; } + priv->mbhc_sw_irq = platform_get_irq_byname(pdev, "mbhc_switch_int"); + if (priv->mbhc_sw_irq < 0) { + dev_err(dev, "failed to get mbhc switch irq\n"); + return priv->mbhc_sw_irq; + } + + if (priv->mbhc_btn_enabled) { + int irq; + + irq = platform_get_irq_byname(pdev, "mbhc_but_press_det"); + if (irq < 0) { + dev_err(dev, "failed to get button press irq\n"); + return irq; + } + + priv->mbhc_btn_press_irq = irq; + + irq = platform_get_irq_byname(pdev, "mbhc_but_rel_det"); + if (irq < 0) { + dev_err(dev, "failed to get button release irq\n"); + return irq; + } + + priv->mbhc_btn_release_irq = irq; + + ret = devm_request_irq(dev, priv->mbhc_btn_release_irq, + mbhc_btn_release_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "mbhc btn release irq", priv); + if (ret) + dev_err(dev, "cannot request mbhc button release irq\n"); + + ret = devm_request_irq(dev, priv->mbhc_btn_press_irq, + mbhc_btn_press_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "mbhc btn press irq", priv); + if (ret) + dev_err(dev, "cannot request mbhc button press irq\n"); + } else { + dev_err(dev, "MBHC button detection disabled\n"); + } + + + ret = devm_request_irq(dev, priv->mbhc_sw_irq, + pm8916_mbhc_switch_irq_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "mbhc switch irq", priv); + if (ret) + dev_err(dev, "cannot request mbhc switch irq\n"); + dev_set_drvdata(dev, priv); return snd_soc_register_codec(dev, &pm8916_wcd_analog,