From patchwork Fri Feb 10 19:36:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Mahapatra, Amit Kumar" X-Patchwork-Id: 654461 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 50E0BC636CC for ; Thu, 16 Feb 2023 15:00:06 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id D9030EE9; Thu, 16 Feb 2023 15:59:13 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz D9030EE9 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1676559603; bh=K0dPJ077mX3U2drwl/USXoDWdAL6tU210T5sa6Zn41g=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=IAObx+1F/InpDKPFmTz00bymTDnDGZseAxH/79HgmFmM451wfduung+rf5WGJ6ZgR 9oRzcaOps2j1suk58JFmCW7NA5NC66Qv9O3QRJohPFdqoJp6ity0ioX7otvUEJ+l8l Ds1CMRH1VFjFa8Ropk7foLTnMW8apkGRqh/Wb+L0= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id ECB71F805D5; Thu, 16 Feb 2023 15:55:37 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 1A659F800E4; Fri, 10 Feb 2023 20:41:26 +0100 (CET) Received: from NAM11-DM6-obe.outbound.protection.outlook.com (mail-dm6nam11on20614.outbound.protection.outlook.com [IPv6:2a01:111:f400:7eaa::614]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 91BE0F80086 for ; Fri, 10 Feb 2023 20:41:21 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 91BE0F80086 Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key, unprotected) header.d=amd.com header.i=@amd.com header.a=rsa-sha256 header.s=selector1 header.b=rE5sEuTw ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=ZrHU9cysQ1ZaMMLXY5I6LSMOYxSs1m4yiIXjIhmEHIk6yI5opDLtddhe+KFMMrhIXJWiQ+b3+JhX3d7cSHocbISd1+KMEA/68xBSDVXXxS4s0sFn3Tq/rQ2LUPTfZWFv2qIeJqhp0G/qlKwL8PRyvgALkdJNDhKUmUK6rfM2OzIVvS5XHz4zKhhkzluYypKydxPgqQUkNZ2WN35zSHXJzS4w8BzisB/Aw5KbI3nqSkRsfj7st9/FuwPalDFyUxO9fuIuHmG2HBC29P+jhPOLC5RB/y4nnStqgUrEklrt4kNWy9KKOPnxTf455jMJ4hD6l07ijcKISOR+QNjXsjiq0Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=9pRfEWPrcKTnEAOViF93f6Zs+0s/cbsP7nxmOsmmBQU=; b=NS7TUIost99UuLuOHqLk/IW11eIPIOpJ0+abjLCuDugJdZayXpUCGLDH8z1kyOxMdIeYbzF+5KO5npyE3YJB3aCI+1+1em9ql4xfwvKMvJkltmHqNjPltk/NsJPtgemDh0x+QavJ2vjUh7EFCBDLPvIklckOGznrrhXyYV/t1CeM77GHBodDJEQj2Pdki6b0+M9pFyDrbT0oHQVPPCNhKWXCnylQUa9c19fT6vrsRRPyPL29fyt1G3SMM4VtLkUB+wG7fmVeWTXh49ZmkJJmMG7HvUANA6rZFGHbCODXF/Czi5sNzB1/EXX87v1hkxLOirGwLRcB6D4i6Aj5vvKsJA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 165.204.84.17) smtp.rcpttodomain=kernel.org smtp.mailfrom=amd.com; dmarc=pass (p=quarantine sp=quarantine pct=100) action=none header.from=amd.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amd.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=9pRfEWPrcKTnEAOViF93f6Zs+0s/cbsP7nxmOsmmBQU=; b=rE5sEuTwA1cIzTT0yHk1iR9bO7CHDvQG0oqe4LLDrul6nfb9mg6Pdodvkdm27xz36dD5KSwXzxJ85s5E2afD8sEoEYspa6jnikQpoV0mUguq9p5YVaa3ZC9yx80y82DiOcrRB3UpfIUqXr2KQKHbo7snI/H2mQSMOHoRAl1y0/4= Received: from MW4PR04CA0216.namprd04.prod.outlook.com (2603:10b6:303:87::11) by CH3PR12MB7715.namprd12.prod.outlook.com (2603:10b6:610:151::10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6086.21; Fri, 10 Feb 2023 19:41:17 +0000 Received: from CO1NAM11FT003.eop-nam11.prod.protection.outlook.com (2603:10b6:303:87:cafe::e1) by MW4PR04CA0216.outlook.office365.com (2603:10b6:303:87::11) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6086.19 via Frontend Transport; Fri, 10 Feb 2023 19:41:16 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 165.204.84.17) smtp.mailfrom=amd.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=amd.com; Received-SPF: Pass (protection.outlook.com: domain of amd.com designates 165.204.84.17 as permitted sender) receiver=protection.outlook.com; client-ip=165.204.84.17; helo=SATLEXMB03.amd.com; pr=C Received: from SATLEXMB03.amd.com (165.204.84.17) by CO1NAM11FT003.mail.protection.outlook.com (10.13.175.93) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.20.6086.21 via Frontend Transport; Fri, 10 Feb 2023 19:41:16 +0000 Received: from SATLEXMB08.amd.com (10.181.40.132) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.34; Fri, 10 Feb 2023 13:41:15 -0600 Received: from SATLEXMB03.amd.com (10.181.40.144) by SATLEXMB08.amd.com (10.181.40.132) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.34; Fri, 10 Feb 2023 11:41:14 -0800 Received: from xhdsneeli40.xilinx.com (10.180.168.240) by SATLEXMB03.amd.com (10.181.40.144) with Microsoft SMTP Server id 15.1.2375.34 via Frontend Transport; Fri, 10 Feb 2023 13:40:49 -0600 From: Amit Kumar Mahapatra To: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Subject: [PATCH v4 09/15] spi: Add stacked and parallel memories support in SPI core Date: Sat, 11 Feb 2023 01:06:40 +0530 Message-ID: <20230210193647.4159467-10-amit.kumar-mahapatra@amd.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230210193647.4159467-1-amit.kumar-mahapatra@amd.com> References: <20230210193647.4159467-1-amit.kumar-mahapatra@amd.com> MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: CO1NAM11FT003:EE_|CH3PR12MB7715:EE_ X-MS-Office365-Filtering-Correlation-Id: b16083be-b4ec-49d6-623f-08db0b9ec67b X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:165.204.84.17; CTRY:US; LANG:en; SCL:1; SRV:; IPV:CAL; SFV:NSPM; H:SATLEXMB03.amd.com; PTR:InfoDomainNonexistent; CAT:NONE; SFS:(13230025)(4636009)(396003)(376002)(136003)(346002)(39860400002)(451199018)(36840700001)(46966006)(40470700004)(186003)(26005)(40460700003)(1076003)(6666004)(2616005)(336012)(36756003)(54906003)(83380400001)(921005)(356005)(82740400003)(81166007)(7336002)(36860700001)(110136005)(7366002)(7406005)(5660300002)(30864003)(8936002)(2906002)(316002)(7276002)(7416002)(40480700001)(47076005)(86362001)(478600001)(4326008)(41300700001)(426003)(8676002)(70586007)(70206006)(1191002)(82310400005)(41080700001)(2101003)(36900700001)(84006005)(83996005); DIR:OUT; SFP:1101; X-OriginatorOrg: amd.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 10 Feb 2023 19:41:16.3739 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: b16083be-b4ec-49d6-623f-08db0b9ec67b X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d; Ip=[165.204.84.17]; Helo=[SATLEXMB03.amd.com] X-MS-Exchange-CrossTenant-AuthSource: CO1NAM11FT003.eop-nam11.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH3PR12MB7715 X-MailFrom: amit.kumar-mahapatra@amd.com X-Mailman-Rule-Hits: nonmember-moderation X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1 Message-ID-Hash: IC25W6OQUJHNC4AZODZOPYDO3Z6RMPOS X-Message-ID-Hash: IC25W6OQUJHNC4AZODZOPYDO3Z6RMPOS X-Mailman-Approved-At: Thu, 16 Feb 2023 14:55:17 +0000 CC: git@amd.com, linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, joel@jms.id.au, andrew@aj.id.au, radu_nicolae.pirea@upb.ro, nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com, claudiu.beznea@microchip.com, bcm-kernel-feedback-list@broadcom.com, fancer.lancer@gmail.com, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, jbrunet@baylibre.com, martin.blumenstingl@googlemail.com, avifishman70@gmail.com, tmaimon77@gmail.com, tali.perry1@gmail.com, venture@google.com, yuenn@google.com, benjaminfair@google.com, yogeshgaur.83@gmail.com, konrad.dybcio@somainline.org, alim.akhtar@samsung.com, ldewangan@nvidia.com, thierry.reding@gmail.com, jonathanh@nvidia.com, michal.simek@amd.com, linux-aspeed@lists.ozlabs.org, openbmc@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, linux-rpi-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-sunxi@lists.linux.dev, linux-tegra@vger.kernel.org, netdev@vger.kernel.org, linux-wpan@vger.kernel.org, libertas-dev@lists.infradead.org, linux-wireless@vger.kernel.org, linux-mtd@lists.infradead.org, lars@metafoo.de, Michael.Hennerich@analog.com, linux-iio@vger.kernel.org, michael@walle.cc, palmer@dabbelt.com, linux-riscv@lists.infradead.org, alsa-devel@alsa-project.org, patches@opensource.cirrus.com, linuxppc-dev@lists.ozlabs.org, amitrkcian2002@gmail.com, Amit Kumar Mahapatra X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: For supporting multiple CS the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A "multi-cs-cap" flag is added in the spi controntroller data, through ctlr->multi-cs-cap the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. Multi CS support using GPIO is not tested due to unavailability of necessary hardware setup. Signed-off-by: Amit Kumar Mahapatra --- drivers/spi/spi.c | 213 +++++++++++++++++++++++++++------------- include/linux/spi/spi.h | 34 +++++-- 2 files changed, 173 insertions(+), 74 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 21a8c3a8eee4..7a9dbe1e0cab 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -613,7 +613,8 @@ static int spi_dev_check(struct device *dev, void *data) struct spi_device *new_spi = data; if (spi->controller == new_spi->controller && - spi_get_chipselect(spi, 0) == spi_get_chipselect(new_spi, 0)) + spi_get_chipselect(spi, 0) == spi_get_chipselect(new_spi, 0) && + spi_get_chipselect(spi, 1) == spi_get_chipselect(new_spi, 1)) return -EBUSY; return 0; } @@ -628,7 +629,7 @@ static int __spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status; + int status, idx; /* * We need to make sure there's no other device with this @@ -637,8 +638,7 @@ static int __spi_add_device(struct spi_device *spi) */ status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check); if (status) { - dev_err(dev, "chipselect %d already in use\n", - spi_get_chipselect(spi, 0)); + dev_err(dev, "chipselect %d already in use\n", spi_get_chipselect(spi, 0)); return status; } @@ -648,8 +648,10 @@ static int __spi_add_device(struct spi_device *spi) return -ENODEV; } - if (ctlr->cs_gpiods) - spi_set_csgpiod(spi, 0, ctlr->cs_gpiods[spi_get_chipselect(spi, 0)]); + if (ctlr->cs_gpiods) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + spi_set_csgpiod(spi, idx, ctlr->cs_gpiods[spi_get_chipselect(spi, idx)]); + } /* * Drivers may modify this initial i/o setup, but will @@ -689,13 +691,15 @@ int spi_add_device(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; - int status; + int status, idx; - /* Chipselects are numbered 0..max; validate. */ - if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0), - ctlr->num_chipselect); - return -EINVAL; + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + /* Chipselects are numbered 0..max; validate. */ + if (spi_get_chipselect(spi, idx) >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx), + ctlr->num_chipselect); + return -EINVAL; + } } /* Set the bus ID string */ @@ -712,12 +716,15 @@ static int spi_add_device_locked(struct spi_device *spi) { struct spi_controller *ctlr = spi->controller; struct device *dev = ctlr->dev.parent; + int idx; - /* Chipselects are numbered 0..max; validate. */ - if (spi_get_chipselect(spi, 0) >= ctlr->num_chipselect) { - dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, 0), - ctlr->num_chipselect); - return -EINVAL; + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + /* Chipselects are numbered 0..max; validate. */ + if (spi_get_chipselect(spi, idx) >= ctlr->num_chipselect) { + dev_err(dev, "cs%d >= max %d\n", spi_get_chipselect(spi, idx), + ctlr->num_chipselect); + return -EINVAL; + } } /* Set the bus ID string */ @@ -965,58 +972,119 @@ static void spi_res_release(struct spi_controller *ctlr, struct spi_message *mes static void spi_set_cs(struct spi_device *spi, bool enable, bool force) { bool activate = enable; + u32 cs_num = __ffs(spi->cs_index_mask); + int idx; /* - * Avoid calling into the driver (or doing delays) if the chip select - * isn't actually changing from the last time this was called. + * In parallel mode all the chip selects are asserted/de-asserted + * at once */ - if (!force && ((enable && spi->controller->last_cs == spi_get_chipselect(spi, 0)) || - (!enable && spi->controller->last_cs != spi_get_chipselect(spi, 0))) && - (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH))) - return; - - trace_spi_set_cs(spi, activate); - - spi->controller->last_cs = enable ? spi_get_chipselect(spi, 0) : -1; - spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; - - if ((spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) && !activate) - spi_delay_exec(&spi->cs_hold, NULL); - - if (spi->mode & SPI_CS_HIGH) - enable = !enable; + if ((spi->cs_index_mask & SPI_PARALLEL_CS_MASK) == SPI_PARALLEL_CS_MASK) { + spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; + + if ((spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) && !activate) + spi_delay_exec(&spi->cs_hold, NULL); + + if (spi->mode & SPI_CS_HIGH) + enable = !enable; + + if (spi_get_csgpiod(spi, 0) && spi_get_csgpiod(spi, 1)) { + if (!(spi->mode & SPI_NO_CS)) { + /* + * Historically ACPI has no means of the GPIO polarity and + * thus the SPISerialBus() resource defines it on the per-chip + * basis. In order to avoid a chain of negations, the GPIO + * polarity is considered being Active High. Even for the cases + * when _DSD() is involved (in the updated versions of ACPI) + * the GPIO CS polarity must be defined Active High to avoid + * ambiguity. That's why we use enable, that takes SPI_CS_HIGH + * into account. + */ + if (has_acpi_companion(&spi->dev)) { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), + !enable); + } else { + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) + /* Polarity handled by GPIO library */ + gpiod_set_value_cansleep(spi_get_csgpiod(spi, idx), + activate); + } + } + /* Some SPI masters need both GPIO CS & slave_select */ + if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && + spi->controller->set_cs) + spi->controller->set_cs(spi, !enable); + else if (spi->controller->set_cs) + spi->controller->set_cs(spi, !enable); + } - if (spi_get_csgpiod(spi, 0)) { - if (!(spi->mode & SPI_NO_CS)) { - /* - * Historically ACPI has no means of the GPIO polarity and - * thus the SPISerialBus() resource defines it on the per-chip - * basis. In order to avoid a chain of negations, the GPIO - * polarity is considered being Active High. Even for the cases - * when _DSD() is involved (in the updated versions of ACPI) - * the GPIO CS polarity must be defined Active High to avoid - * ambiguity. That's why we use enable, that takes SPI_CS_HIGH - * into account. - */ - if (has_acpi_companion(&spi->dev)) - gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), !enable); - else - /* Polarity handled by GPIO library */ - gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), activate); + for (idx = 0; idx < SPI_CS_CNT_MAX; idx++) { + if (spi_get_csgpiod(spi, idx) || !spi->controller->set_cs_timing) { + if (activate) + spi_delay_exec(&spi->cs_setup, NULL); + else + spi_delay_exec(&spi->cs_inactive, NULL); + } } - /* Some SPI masters need both GPIO CS & slave_select */ - if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && - spi->controller->set_cs) + } else { + /* + * Avoid calling into the driver (or doing delays) if the chip select + * isn't actually changing from the last time this was called. + */ + if (!force && ((enable && spi->controller->last_cs == + spi_get_chipselect(spi, cs_num)) || + (!enable && spi->controller->last_cs != + spi_get_chipselect(spi, cs_num))) && + (spi->controller->last_cs_mode_high == + (spi->mode & SPI_CS_HIGH))) + return; + + trace_spi_set_cs(spi, activate); + + spi->controller->last_cs = enable ? spi_get_chipselect(spi, cs_num) : -1; + spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; + + if ((spi_get_csgpiod(spi, cs_num) || !spi->controller->set_cs_timing) && !activate) + spi_delay_exec(&spi->cs_hold, NULL); + + if (spi->mode & SPI_CS_HIGH) + enable = !enable; + + if (spi_get_csgpiod(spi, cs_num)) { + if (!(spi->mode & SPI_NO_CS)) { + /* + * Historically ACPI has no means of the GPIO polarity and + * thus the SPISerialBus() resource defines it on the per-chip + * basis. In order to avoid a chain of negations, the GPIO + * polarity is considered being Active High. Even for the cases + * when _DSD() is involved (in the updated versions of ACPI) + * the GPIO CS polarity must be defined Active High to avoid + * ambiguity. That's why we use enable, that takes SPI_CS_HIGH + * into account. + */ + if (has_acpi_companion(&spi->dev)) + gpiod_set_value_cansleep(spi_get_csgpiod(spi, cs_num), + !enable); + else + /* Polarity handled by GPIO library */ + gpiod_set_value_cansleep(spi_get_csgpiod(spi, cs_num), + activate); + } + /* Some SPI masters need both GPIO CS & slave_select */ + if ((spi->controller->flags & SPI_MASTER_GPIO_SS) && + spi->controller->set_cs) + spi->controller->set_cs(spi, !enable); + } else if (spi->controller->set_cs) { spi->controller->set_cs(spi, !enable); - } else if (spi->controller->set_cs) { - spi->controller->set_cs(spi, !enable); - } + } - if (spi_get_csgpiod(spi, 0) || !spi->controller->set_cs_timing) { - if (activate) - spi_delay_exec(&spi->cs_setup, NULL); - else - spi_delay_exec(&spi->cs_inactive, NULL); + if (spi_get_csgpiod(spi, cs_num) || !spi->controller->set_cs_timing) { + if (activate) + spi_delay_exec(&spi->cs_setup, NULL); + else + spi_delay_exec(&spi->cs_inactive, NULL); + } } } @@ -2238,8 +2306,8 @@ static void of_spi_parse_dt_cs_delay(struct device_node *nc, static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, struct device_node *nc) { - u32 value; - int rc; + u32 value, cs[SPI_CS_CNT_MAX] = {0}; + int rc, idx; /* Mode (clock phase/polarity/etc.) */ if (of_property_read_bool(nc, "spi-cpha")) @@ -2312,13 +2380,21 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, } /* Device address */ - rc = of_property_read_u32(nc, "reg", &value); - if (rc) { + rc = of_property_read_variable_u32_array(nc, "reg", &cs[0], 1, + SPI_CS_CNT_MAX); + if (rc < 0 || rc > ctlr->num_chipselect) { dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n", nc, rc); return rc; + } else if ((of_property_read_bool(nc, "parallel-memories")) && + (!ctlr->multi_cs_cap)) { + dev_err(&ctlr->dev, "SPI controller doesn't support multi CS\n"); + return -EINVAL; } - spi_set_chipselect(spi, 0, value); + for (idx = 0; idx < rc; idx++) + spi_set_chipselect(spi, idx, cs[idx]); + /* By default set the spi->cs_index_mask as 1 */ + spi->cs_index_mask = 0x01; /* Device speed */ if (!of_property_read_u32(nc, "spi-max-frequency", &value)) @@ -3839,6 +3915,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) struct spi_controller *ctlr = spi->controller; struct spi_transfer *xfer; int w_size; + u32 cs_num = __ffs(spi->cs_index_mask); if (list_empty(&message->transfers)) return -EINVAL; @@ -3851,7 +3928,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) * cs_change is set for each transfer. */ if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) || - spi_get_csgpiod(spi, 0))) { + spi_get_csgpiod(spi, cs_num))) { size_t maxsize; int ret; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 9b23a1d0dd0d..a73cbbda006e 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -19,6 +19,11 @@ #include #include +/* Max no. of CS supported per spi device */ +#define SPI_CS_CNT_MAX 2 + +/* chip select mask */ +#define SPI_PARALLEL_CS_MASK (BIT(0) | BIT(1)) struct dma_chan; struct software_node; struct ptp_system_timestamp; @@ -163,6 +168,7 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); * deasserted. If @cs_change_delay is used from @spi_transfer, then the * two delays will be added up. * @pcpu_statistics: statistics for the spi_device + * @cs_index_mask: Bit mask of the active chipselect(s) in the chipselect array * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -178,7 +184,7 @@ struct spi_device { struct spi_controller *controller; struct spi_controller *master; /* Compatibility layer */ u32 max_speed_hz; - u8 chip_select; + u8 chip_select[SPI_CS_CNT_MAX]; u8 bits_per_word; bool rt; #define SPI_NO_TX BIT(31) /* No transmit wire */ @@ -199,7 +205,7 @@ struct spi_device { void *controller_data; char modalias[SPI_NAME_SIZE]; const char *driver_override; - struct gpio_desc *cs_gpiod; /* Chip select gpio desc */ + struct gpio_desc *cs_gpiod[SPI_CS_CNT_MAX]; /* Chip select gpio desc */ struct spi_delay word_delay; /* Inter-word delay */ /* CS delays */ struct spi_delay cs_setup; @@ -209,6 +215,13 @@ struct spi_device { /* The statistics */ struct spi_statistics __percpu *pcpu_statistics; + /* Bit mask of the chipselect(s) that the driver need to use from + * the chipselect array.When the controller is capable to handle + * multiple chip selects & memories are connected in parallel + * then more than one bit need to be set in cs_index_mask. + */ + u32 cs_index_mask : 2; + /* * likely need more hooks for more protocol options affecting how * the controller talks to each chip, like: @@ -265,22 +278,22 @@ static inline void *spi_get_drvdata(struct spi_device *spi) static inline u8 spi_get_chipselect(struct spi_device *spi, u8 idx) { - return spi->chip_select; + return spi->chip_select[idx]; } static inline void spi_set_chipselect(struct spi_device *spi, u8 idx, u8 chipselect) { - spi->chip_select = chipselect; + spi->chip_select[idx] = chipselect; } static inline struct gpio_desc *spi_get_csgpiod(struct spi_device *spi, u8 idx) { - return spi->cs_gpiod; + return spi->cs_gpiod[idx]; } static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_desc *csgpiod) { - spi->cs_gpiod = csgpiod; + spi->cs_gpiod[idx] = csgpiod; } struct spi_message; @@ -387,6 +400,8 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for exclusion of multiple callers * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use + * @multi_cs_cap: indicates that the SPI Controller can assert/de-assert + * more than one chip select at once. * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -584,6 +599,13 @@ struct spi_controller { /* Flag indicating that the SPI bus is locked for exclusive use */ bool bus_lock_flag; + /* + * Flag indicating that the spi-controller has multi chip select + * capability and can assert/de-assert more than one chip select + * at once. + */ + bool multi_cs_cap; + /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another