diff mbox series

[2/4] ASoC: cs35l56: Wake transactions need to be issued twice

Message ID 20231006111039.101914-3-rf@opensource.cirrus.com
State New
Headers show
Series ASoC: cs35l56: Update hibernate/wake sequences and enable hibernation | expand

Commit Message

Richard Fitzgerald Oct. 6, 2023, 11:10 a.m. UTC 
From: Simon Trimmer <simont@opensource.cirrus.com>

As the dummy wake is a toggling signal (either I2C or SPI activity) it
is not guaranteed to meet the minimum asserted hold time for a wake
signal. In this case the wake must guarantee rising edges separated by
at least the minimum hold time.

Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 include/sound/cs35l56.h           |  1 +
 sound/soc/codecs/cs35l56-shared.c | 51 +++++++++++++++++++++----------
 2 files changed, 36 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/include/sound/cs35l56.h b/include/sound/cs35l56.h
index 762b96b29211..8c18e8b6d27d 100644
--- a/include/sound/cs35l56.h
+++ b/include/sound/cs35l56.h
@@ -243,6 +243,7 @@ 
 #define CS35L56_HALO_STATE_POLL_US			1000
 #define CS35L56_HALO_STATE_TIMEOUT_US			50000
 #define CS35L56_RESET_PULSE_MIN_US			1100
+#define CS35L56_WAKE_HOLD_TIME_US			1000
 
 #define CS35L56_SDW1_PLAYBACK_PORT			1
 #define CS35L56_SDW1_CAPTURE_PORT			3
diff --git a/sound/soc/codecs/cs35l56-shared.c b/sound/soc/codecs/cs35l56-shared.c
index 68dc93b82789..953ba066bab1 100644
--- a/sound/soc/codecs/cs35l56-shared.c
+++ b/sound/soc/codecs/cs35l56-shared.c
@@ -446,6 +446,32 @@  static const struct reg_sequence cs35l56_hibernate_wake_seq[] = {
 	REG_SEQ0(CS35L56_DSP_VIRTUAL1_MBOX_1, CS35L56_MBOX_CMD_WAKEUP),
 };
 
+static void cs35l56_issue_wake_event(struct cs35l56_base *cs35l56_base)
+{
+	/*
+	 * Dummy transactions to trigger I2C/SPI auto-wake. Issue two
+	 * transactions to meet the minimum required time from the rising edge
+	 * to the last falling edge of wake.
+	 *
+	 * It uses bypassed write because we must wake the chip before
+	 * disabling regmap cache-only.
+	 *
+	 * This can NAK on I2C which will terminate the write sequence so the
+	 * single-write sequence is issued twice.
+	 */
+	regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
+					cs35l56_hibernate_wake_seq,
+					ARRAY_SIZE(cs35l56_hibernate_wake_seq));
+
+	usleep_range(CS35L56_WAKE_HOLD_TIME_US, 2 * CS35L56_WAKE_HOLD_TIME_US);
+
+	regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
+					cs35l56_hibernate_wake_seq,
+					ARRAY_SIZE(cs35l56_hibernate_wake_seq));
+
+	cs35l56_wait_control_port_ready();
+}
+
 int cs35l56_runtime_suspend_common(struct cs35l56_base *cs35l56_base)
 {
 	unsigned int val;
@@ -500,17 +526,9 @@  int cs35l56_runtime_resume_common(struct cs35l56_base *cs35l56_base, bool is_sou
 	if (!cs35l56_base->can_hibernate)
 		goto out_sync;
 
-	if (!is_soundwire) {
-		/*
-		 * Dummy transaction to trigger I2C/SPI auto-wake. This will NAK on I2C.
-		 * Must be done before releasing cache-only.
-		 */
-		regmap_multi_reg_write_bypassed(cs35l56_base->regmap,
-						cs35l56_hibernate_wake_seq,
-						ARRAY_SIZE(cs35l56_hibernate_wake_seq));
-
-		cs35l56_wait_control_port_ready();
-	}
+	/* Must be done before releasing cache-only */
+	if (!is_soundwire)
+		cs35l56_issue_wake_event(cs35l56_base);
 
 out_sync:
 	regcache_cache_only(cs35l56_base->regmap, false);
@@ -578,13 +596,14 @@  int cs35l56_hw_init(struct cs35l56_base *cs35l56_base)
 	unsigned int devid, revid, otpid, secured;
 
 	/*
-	 * If the system is not using a reset_gpio then issue a
-	 * dummy read to force a wakeup.
+	 * When the system is not using a reset_gpio ensure the device is
+	 * awake, otherwise the device has just been released from reset and
+	 * the driver must wait for the control port to become usable.
 	 */
 	if (!cs35l56_base->reset_gpio)
-		regmap_read(cs35l56_base->regmap, CS35L56_DSP_VIRTUAL1_MBOX_1, &devid);
-
-	cs35l56_wait_control_port_ready();
+		cs35l56_issue_wake_event(cs35l56_base);
+	else
+		cs35l56_wait_control_port_ready();
 
 	/*
 	 * The HALO_STATE register is in different locations on Ax and B0