From patchwork Mon Apr 10 19:22:33 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mark Brown X-Patchwork-Id: 104413 Delivered-To: patch@linaro.org Received: by 10.140.89.233 with SMTP id v96csp1499118qgd; Mon, 10 Apr 2017 12:22:54 -0700 (PDT) X-Received: by 10.223.163.136 with SMTP id l8mr5229733wrb.128.1491852174466; Mon, 10 Apr 2017 12:22:54 -0700 (PDT) Return-Path: Received: from alsa0.perex.cz (alsa0.perex.cz. [77.48.224.243]) by mx.google.com with ESMTP id g14si13909439wrb.231.2017.04.10.12.22.54; Mon, 10 Apr 2017 12:22:54 -0700 (PDT) Received-SPF: pass (google.com: domain of alsa-devel-bounces@alsa-project.org designates 77.48.224.243 as permitted sender) client-ip=77.48.224.243; Authentication-Results: mx.google.com; spf=pass (google.com: domain of alsa-devel-bounces@alsa-project.org designates 77.48.224.243 as permitted sender) smtp.mailfrom=alsa-devel-bounces@alsa-project.org Received: from alsa0.perex.cz (localhost [127.0.0.1]) by alsa0.perex.cz (Postfix) with ESMTP id 75BAF266C1C; Mon, 10 Apr 2017 21:22:52 +0200 (CEST) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id F1080266CAD; Mon, 10 Apr 2017 21:22:51 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on mail1.perex.cz X-Spam-Level: X-Spam-Status: No, score=-0.0 required=5.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, RP_MATCHES_RCVD,SPF_PASS autolearn=disabled version=3.4.0 Received: from mezzanine.sirena.org.uk (mezzanine.sirena.org.uk [106.187.55.193]) by alsa0.perex.cz (Postfix) with ESMTP id BC9CD266C13 for ; Mon, 10 Apr 2017 21:22:47 +0200 (CEST) Received: from [2001:470:1f1d:6b5::3] (helo=debutante) by mezzanine.sirena.org.uk with esmtpsa (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.84_2) (envelope-from ) id 1cxetY-0008Vr-Pg; Mon, 10 Apr 2017 19:22:39 +0000 Received: from broonie by debutante with local (Exim 4.89) (envelope-from ) id 1cxetV-0005jz-Rw; Mon, 10 Apr 2017 20:22:33 +0100 From: Mark Brown To: Fabio Estevam In-Reply-To: <1491402754-19802-1-git-send-email-fabio.estevam@nxp.com> Message-Id: Date: Mon, 10 Apr 2017 20:22:33 +0100 X-SA-Exim-Connect-IP: 2001:470:1f1d:6b5::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Cc: alsa-devel@alsa-project.org, broonie@kernel.org, max.krummenacher@toradex.com Subject: [alsa-devel] Applied "ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed" to the asoc tree X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org The patch ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed has been applied to the asoc tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 570c70a60f53ca737ead4e5966c446bf0d39fac9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 5 Apr 2017 11:32:34 -0300 Subject: [PATCH] ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed Introduce the "lrclk-strength" property to allow LRCLK pad drive strength to be changed via device tree. When running a stress playback loop test on a mx6dl wandboard channel swap can be noticed on about 10% of the times. While debugging this issue I noticed that when probing the SGTL5000 LRCLK pin with the scope the swap did not happen. After removing the probe the swap started to happen again. After changing the LRCLK pad drive strength to the maximum value the issue is gone. Same fix works on a mx6dl Colibri board as well. Signed-off-by: Fabio Estevam Tested-by: Max Krummenacher Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/sgtl5000.txt | 9 +++++++++ sound/soc/codecs/sgtl5000.c | 19 ++++++++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-) -- 2.11.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 5666da7b8605..7a73a9d62015 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -26,6 +26,15 @@ Optional properties: If this node is not mentioned or the value is unknown, then the value is set to 1.25V. +- lrclk-strength: the LRCLK pad strength. Possible values are: +0, 1, 2 and 3 as per the table below: + +VDDIO 1.8V 2.5V 3.3V +0 = Disable +1 = 1.66 mA 2.87 mA 4.02 mA +2 = 3.33 mA 5.74 mA 8.03 mA +3 = 4.99 mA 8.61 mA 12.05 mA + Example: codec: sgtl5000@0a { diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1589325855bc..5a2702edeb77 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -99,6 +99,13 @@ enum sgtl5000_micbias_resistor { SGTL5000_MICBIAS_8K = 8, }; +enum { + I2S_LRCLK_STRENGTH_DISABLE, + I2S_LRCLK_STRENGTH_LOW, + I2S_LRCLK_STRENGTH_MEDIUM, + I2S_LRCLK_STRENGTH_HIGH, +}; + /* sgtl5000 private structure in codec */ struct sgtl5000_priv { int sysclk; /* sysclk rate */ @@ -111,6 +118,7 @@ struct sgtl5000_priv { int revision; u8 micbias_resistor; u8 micbias_voltage; + u8 lrclk_strength; }; /* @@ -1089,6 +1097,7 @@ static int sgtl5000_enable_regulators(struct i2c_client *client) static int sgtl5000_probe(struct snd_soc_codec *codec) { int ret; + u16 reg; struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); /* power up sgtl5000 */ @@ -1118,7 +1127,8 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) SGTL5000_DAC_MUTE_RIGHT | SGTL5000_DAC_MUTE_LEFT); - snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f); + reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f); + snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, reg); snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL, SGTL5000_HP_ZCD_EN | @@ -1347,6 +1357,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, } } + sgtl5000->lrclk_strength = I2S_LRCLK_STRENGTH_LOW; + if (!of_property_read_u32(np, "lrclk-strength", &value)) { + if (value > I2S_LRCLK_STRENGTH_HIGH) + value = I2S_LRCLK_STRENGTH_LOW; + sgtl5000->lrclk_strength = value; + } + /* Ensure sgtl5000 will start with sane register values */ sgtl5000_fill_defaults(client);