@@ -71,6 +71,7 @@
/* System */
#define TC_IDREG 0x0500
+#define SYSSTAT 0x0508
#define SYSCTRL 0x0510
#define DP0_AUDSRC_NO_INPUT (0 << 3)
#define DP0_AUDSRC_I2S_RX (1 << 3)
@@ -79,9 +80,16 @@
#define DP0_VIDSRC_DPI_RX (2 << 0)
#define DP0_VIDSRC_COLOR_BAR (3 << 0)
#define GPIOM 0x0540
+#define GPIOC 0x0544
+#define GPIOO 0x0548
#define GPIOI 0x054c
#define INTCTL_G 0x0560
#define INTSTS_G 0x0564
+
+#define INT_SYSERR BIT(16)
+#define INT_GPIO_H(x) (1 << (x == 0 ? 2 : 10))
+#define INT_GPIO_LC(x) (1 << (x == 0 ? 3 : 11))
+
#define INT_GP0_LCNT 0x0584
#define INT_GP1_LCNT 0x0588
@@ -219,6 +227,12 @@ struct tc_data {
struct gpio_desc *sd_gpio;
struct gpio_desc *reset_gpio;
struct clk *refclk;
+
+ /* do we have IRQ */
+ bool have_irq;
+
+ /* HPD pin number (0 or 1) or -ENODEV */
+ int hpd_pin;
};
static inline struct tc_data *aux_to_tc(struct drm_dp_aux *a)
@@ -1109,6 +1123,12 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
struct tc_data *tc = bridge_to_tc(bridge);
int ret;
+ ret = tc_get_display_props(tc);
+ if (ret < 0) {
+ dev_err(tc->dev, "failed to read display props: %d\n", ret);
+ return;
+ }
+
ret = tc_main_link_enable(tc);
if (ret < 0) {
dev_err(tc->dev, "main link enable error: %d\n", ret);
@@ -1221,19 +1241,40 @@ static int tc_connector_get_modes(struct drm_connector *connector)
return count;
}
-static void tc_connector_set_polling(struct tc_data *tc,
- struct drm_connector *connector)
-{
- /* TODO: add support for HPD */
- connector->polled = DRM_CONNECTOR_POLL_CONNECT |
- DRM_CONNECTOR_POLL_DISCONNECT;
-}
-
static const struct drm_connector_helper_funcs tc_connector_helper_funcs = {
.get_modes = tc_connector_get_modes,
};
+static enum drm_connector_status tc_connector_detect(struct drm_connector *connector,
+ bool force)
+{
+ struct tc_data *tc = connector_to_tc(connector);
+ bool conn;
+ u32 val;
+ int ret;
+
+ if (tc->hpd_pin < 0) {
+ if (tc->panel)
+ return connector_status_connected;
+ else
+ return connector_status_unknown;
+ }
+
+ tc_read(GPIOI, &val);
+
+ conn = val & BIT(tc->hpd_pin);
+
+ if (conn)
+ return connector_status_connected;
+ else
+ return connector_status_disconnected;
+
+err:
+ return connector_status_unknown;
+}
+
static const struct drm_connector_funcs tc_connector_funcs = {
+ .detect = tc_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.reset = drm_atomic_helper_connector_reset,
@@ -1248,7 +1289,7 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
struct drm_device *drm = bridge->dev;
int ret;
- /* Create eDP connector */
+ /* Create DP/eDP connector */
drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
tc->panel ? DRM_MODE_CONNECTOR_eDP :
@@ -1256,6 +1297,15 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
if (ret)
return ret;
+ /* Don't poll if don't have HPD connected */
+ if (tc->hpd_pin >= 0) {
+ if (tc->have_irq)
+ tc->connector.polled = DRM_CONNECTOR_POLL_HPD;
+ else
+ tc->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+ }
+
if (tc->panel)
drm_panel_attach(tc->panel, &tc->connector);
@@ -1322,6 +1372,49 @@ static const struct regmap_config tc_regmap_config = {
.val_format_endian = REGMAP_ENDIAN_LITTLE,
};
+static irqreturn_t tc_irq_handler(int irq, void *arg)
+{
+ struct tc_data *tc = arg;
+ u32 val;
+ int r;
+
+ r = regmap_read(tc->regmap, INTSTS_G, &val);
+ if (r)
+ return IRQ_NONE;
+
+ if (!val)
+ return IRQ_NONE;
+
+ if (val & INT_SYSERR) {
+ u32 stat = 0;
+
+ regmap_read(tc->regmap, SYSSTAT, &stat);
+
+ dev_err(tc->dev, "syserr %x\n", stat);
+ }
+
+ if (tc->hpd_pin >= 0 && tc->bridge.dev) {
+ /*
+ * H is triggered when the GPIO goes high.
+ *
+ * LC is triggered when the GPIO goes low and stays low for
+ * the duration of LCNT
+ */
+ bool h = val & INT_GPIO_H(tc->hpd_pin);
+ bool lc = val & INT_GPIO_LC(tc->hpd_pin);
+
+ dev_dbg(tc->dev, "GPIO%d: %s %s\n", tc->hpd_pin,
+ h ? "H" : "", lc ? "LC" : "");
+
+ if (h || lc)
+ drm_kms_helper_hotplug_event(tc->bridge.dev);
+ }
+
+ regmap_write(tc->regmap, INTSTS_G, val);
+
+ return IRQ_HANDLED;
+}
+
static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
@@ -1373,6 +1466,33 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
return ret;
}
+ ret = of_property_read_u32(dev->of_node, "toshiba,hpd-pin",
+ &tc->hpd_pin);
+ if (ret) {
+ tc->hpd_pin = -ENODEV;
+ } else {
+ if (tc->hpd_pin < 0 || tc->hpd_pin > 1) {
+ dev_err(dev, "failed to parse HPD number\n");
+ return ret;
+ }
+ }
+
+ if (client->irq > 0) {
+ /* enable SysErr */
+ regmap_write(tc->regmap, INTCTL_G, INT_SYSERR);
+
+ ret = devm_request_threaded_irq(dev, client->irq,
+ NULL, tc_irq_handler,
+ IRQF_ONESHOT,
+ "tc358767-irq", tc);
+ if (ret) {
+ dev_err(dev, "failed to register dp interrupt\n");
+ return ret;
+ }
+
+ tc->have_irq = true;
+ }
+
ret = regmap_read(tc->regmap, TC_IDREG, &tc->rev);
if (ret) {
dev_err(tc->dev, "can not read device ID: %d\n", ret);
@@ -1386,6 +1506,22 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */
+ if (tc->hpd_pin >= 0) {
+ u32 lcnt_reg = tc->hpd_pin == 0 ? INT_GP0_LCNT : INT_GP1_LCNT;
+ u32 h_lc = INT_GPIO_H(tc->hpd_pin) | INT_GPIO_LC(tc->hpd_pin);
+
+ /* Set LCNT to 2ms */
+ regmap_write(tc->regmap, lcnt_reg,
+ clk_get_rate(tc->refclk) * 2 / 1000);
+ /* We need the "alternate" mode for HPD */
+ regmap_write(tc->regmap, GPIOM, BIT(tc->hpd_pin));
+
+ if (tc->have_irq) {
+ /* enable H & LC */
+ regmap_update_bits(tc->regmap, INTCTL_G, h_lc, h_lc);
+ }
+ }
+
ret = tc_aux_link_setup(tc);
if (ret)
return ret;
@@ -1398,12 +1534,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (ret)
return ret;
- ret = tc_get_display_props(tc);
- if (ret)
- goto err_unregister_aux;
-
- tc_connector_set_polling(tc, &tc->connector);
-
tc->bridge.funcs = &tc_bridge_funcs;
tc->bridge.of_node = dev->of_node;
drm_bridge_add(&tc->bridge);
@@ -1411,9 +1541,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
i2c_set_clientdata(client, tc);
return 0;
-err_unregister_aux:
- drm_dp_aux_unregister(&tc->aux);
- return ret;
}
static int tc_remove(struct i2c_client *client)
Add support for interrupt and hotplug handling. Both are optional. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/gpu/drm/bridge/tc358767.c | 163 ++++++++++++++++++++++++++---- 1 file changed, 145 insertions(+), 18 deletions(-)