diff mbox series

[PATCHv4,07/24] drm/bridge: tc358767: move video stream setup to tc_main_link_stream

Message ID 20190528082747.3631-8-tomi.valkeinen@ti.com
State Accepted
Commit 5761a259aa9efc61b3253675643a87b3092e90b5
Headers show
Series drm/bridge: tc358767: DP support | expand

Commit Message

Tomi Valkeinen May 28, 2019, 8:27 a.m. UTC 
The driver currently sets the video stream registers in
tc_main_link_setup. One should be able to establish the DP link without
any video stream, so a more logical place is to configure the stream in
the tc_main_link_stream. So move them there.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/bridge/tc358767.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 39a9de880e5a..4de21c3883d8 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1004,15 +1004,6 @@  static int tc_main_link_setup(struct tc_data *tc)
 		return -EAGAIN;
 	}
 
-	ret = tc_set_video_mode(tc, tc->mode);
-	if (ret)
-		goto err;
-
-	/* Set M/N */
-	ret = tc_stream_clock_calc(tc);
-	if (ret)
-		goto err;
-
 	return 0;
 err_dpcd_read:
 	dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
@@ -1031,6 +1022,15 @@  static int tc_main_link_stream(struct tc_data *tc, int state)
 	dev_dbg(tc->dev, "stream: %d\n", state);
 
 	if (state) {
+		ret = tc_set_video_mode(tc, tc->mode);
+		if (ret)
+			goto err;
+
+		/* Set M/N */
+		ret = tc_stream_clock_calc(tc);
+		if (ret)
+			goto err;
+
 		value = VID_MN_GEN | DP_EN;
 		if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
 			value |= EF_EN;