diff mbox series

[47/77] Make subroutines of nonzero_bits operate on scalar_int_mode

Message ID 87iniwg1hw.fsf@linaro.org
State Accepted
Commit 22527b59dbb10204626aeb8660a8e262377ac354
Headers show
Series Add wrapper classes for machine_modes | expand

Commit Message

Richard Sandiford July 13, 2017, 8:55 a.m. UTC
nonzero_bits1 assumed that all bits of a floating-point or vector mode
were needed.  It seems likely that fixed-point modes should have been
handled in the same way.  After excluding those, the only remaining
modes that are likely to be useful are scalar integer ones.

This patch moves the mode class check to nonzero_bits itself, along
with the handling of mode == VOIDmode.  The subroutines of nonzero_bits
can then take scalar_int_modes.

gcc/
2017-07-13  Richard Sandiford  <richard.sandiford@linaro.org>
	    Alan Hayward  <alan.hayward@arm.com>
	    David Sherwood  <david.sherwood@arm.com>

	* rtlanal.c (nonzero_bits): Handle VOIDmode here rather than
	in subroutines.  Return the mode mask for non-integer modes.
	(cached_nonzero_bits): Change the type of the mode parameter
	to scalar_int_mode.
	(nonzero_bits1): Likewise.  Remove early exit for other mode
	classes.  Handle CONST_INT_P first and then check whether X
	also has a scalar integer mode.

Comments

Jeff Law Aug. 24, 2017, 6:17 a.m. UTC | #1
On 07/13/2017 02:55 AM, Richard Sandiford wrote:
> nonzero_bits1 assumed that all bits of a floating-point or vector mode

> were needed.  It seems likely that fixed-point modes should have been

> handled in the same way.  After excluding those, the only remaining

> modes that are likely to be useful are scalar integer ones.

> 

> This patch moves the mode class check to nonzero_bits itself, along

> with the handling of mode == VOIDmode.  The subroutines of nonzero_bits

> can then take scalar_int_modes.

> 

> gcc/

> 2017-07-13  Richard Sandiford  <richard.sandiford@linaro.org>

> 	    Alan Hayward  <alan.hayward@arm.com>

> 	    David Sherwood  <david.sherwood@arm.com>

> 

> 	* rtlanal.c (nonzero_bits): Handle VOIDmode here rather than

> 	in subroutines.  Return the mode mask for non-integer modes.

> 	(cached_nonzero_bits): Change the type of the mode parameter

> 	to scalar_int_mode.

> 	(nonzero_bits1): Likewise.  Remove early exit for other mode

> 	classes.  Handle CONST_INT_P first and then check whether X

> 	also has a scalar integer mode.

OK.  I suspect not handling fixed-point modes like floating point modes
was just an oversight.

jeff
diff mbox series

Patch

Index: gcc/rtlanal.c
===================================================================
--- gcc/rtlanal.c	2017-07-13 09:18:39.592733560 +0100
+++ gcc/rtlanal.c	2017-07-13 09:18:44.976290184 +0100
@@ -43,10 +43,10 @@  static bool covers_regno_no_parallel_p (
 static int computed_jump_p_1 (const_rtx);
 static void parms_set (rtx, const_rtx, void *);
 
-static unsigned HOST_WIDE_INT cached_nonzero_bits (const_rtx, machine_mode,
+static unsigned HOST_WIDE_INT cached_nonzero_bits (const_rtx, scalar_int_mode,
                                                    const_rtx, machine_mode,
                                                    unsigned HOST_WIDE_INT);
-static unsigned HOST_WIDE_INT nonzero_bits1 (const_rtx, machine_mode,
+static unsigned HOST_WIDE_INT nonzero_bits1 (const_rtx, scalar_int_mode,
 					     const_rtx, machine_mode,
                                              unsigned HOST_WIDE_INT);
 static unsigned int cached_num_sign_bit_copies (const_rtx, machine_mode, const_rtx,
@@ -4237,7 +4237,12 @@  default_address_cost (rtx x, machine_mod
 unsigned HOST_WIDE_INT
 nonzero_bits (const_rtx x, machine_mode mode)
 {
-  return cached_nonzero_bits (x, mode, NULL_RTX, VOIDmode, 0);
+  if (mode == VOIDmode)
+    mode = GET_MODE (x);
+  scalar_int_mode int_mode;
+  if (!is_a <scalar_int_mode> (mode, &int_mode))
+    return GET_MODE_MASK (mode);
+  return cached_nonzero_bits (x, int_mode, NULL_RTX, VOIDmode, 0);
 }
 
 unsigned int
@@ -4281,7 +4286,7 @@  nonzero_bits_binary_arith_p (const_rtx x
    identical subexpressions on the first or the second level.  */
 
 static unsigned HOST_WIDE_INT
-cached_nonzero_bits (const_rtx x, machine_mode mode, const_rtx known_x,
+cached_nonzero_bits (const_rtx x, scalar_int_mode mode, const_rtx known_x,
 		     machine_mode known_mode,
 		     unsigned HOST_WIDE_INT known_ret)
 {
@@ -4334,7 +4339,7 @@  #define cached_num_sign_bit_copies sorry
    an arithmetic operation, we can do better.  */
 
 static unsigned HOST_WIDE_INT
-nonzero_bits1 (const_rtx x, machine_mode mode, const_rtx known_x,
+nonzero_bits1 (const_rtx x, scalar_int_mode mode, const_rtx known_x,
 	       machine_mode known_mode,
 	       unsigned HOST_WIDE_INT known_ret)
 {
@@ -4342,19 +4347,31 @@  nonzero_bits1 (const_rtx x, machine_mode
   unsigned HOST_WIDE_INT inner_nz;
   enum rtx_code code;
   machine_mode inner_mode;
+  scalar_int_mode xmode;
+
   unsigned int mode_width = GET_MODE_PRECISION (mode);
 
-  /* For floating-point and vector values, assume all bits are needed.  */
-  if (FLOAT_MODE_P (GET_MODE (x)) || FLOAT_MODE_P (mode)
-      || VECTOR_MODE_P (GET_MODE (x)) || VECTOR_MODE_P (mode))
+  if (CONST_INT_P (x))
+    {
+      if (SHORT_IMMEDIATES_SIGN_EXTEND
+	  && INTVAL (x) > 0
+	  && mode_width < BITS_PER_WORD
+	  && (UINTVAL (x) & (HOST_WIDE_INT_1U << (mode_width - 1))) != 0)
+	return UINTVAL (x) | (HOST_WIDE_INT_M1U << mode_width);
+
+      return UINTVAL (x);
+    }
+
+  if (!is_a <scalar_int_mode> (GET_MODE (x), &xmode))
     return nonzero;
+  unsigned int xmode_width = GET_MODE_PRECISION (xmode);
 
   /* If X is wider than MODE, use its mode instead.  */
-  if (GET_MODE_PRECISION (GET_MODE (x)) > mode_width)
+  if (xmode_width > mode_width)
     {
-      mode = GET_MODE (x);
+      mode = xmode;
       nonzero = GET_MODE_MASK (mode);
-      mode_width = GET_MODE_PRECISION (mode);
+      mode_width = xmode_width;
     }
 
   if (mode_width > HOST_BITS_PER_WIDE_INT)
@@ -4370,15 +4387,13 @@  nonzero_bits1 (const_rtx x, machine_mode
      not known to be zero.  */
 
   if (!WORD_REGISTER_OPERATIONS
-      && GET_MODE (x) != VOIDmode
-      && GET_MODE (x) != mode
-      && GET_MODE_PRECISION (GET_MODE (x)) <= BITS_PER_WORD
-      && GET_MODE_PRECISION (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT
-      && GET_MODE_PRECISION (mode) > GET_MODE_PRECISION (GET_MODE (x)))
+      && mode_width > xmode_width
+      && xmode_width <= BITS_PER_WORD
+      && xmode_width <= HOST_BITS_PER_WIDE_INT)
     {
-      nonzero &= cached_nonzero_bits (x, GET_MODE (x),
+      nonzero &= cached_nonzero_bits (x, xmode,
 				      known_x, known_mode, known_ret);
-      nonzero |= GET_MODE_MASK (mode) & ~GET_MODE_MASK (GET_MODE (x));
+      nonzero |= GET_MODE_MASK (mode) & ~GET_MODE_MASK (xmode);
       return nonzero;
     }
 
@@ -4395,7 +4410,8 @@  nonzero_bits1 (const_rtx x, machine_mode
 	 we can do this only if the target does not support different pointer
 	 or address modes depending on the address space.  */
       if (target_default_pointer_address_modes_p ()
-	  && POINTERS_EXTEND_UNSIGNED && GET_MODE (x) == Pmode
+	  && POINTERS_EXTEND_UNSIGNED
+	  && xmode == Pmode
 	  && REG_POINTER (x)
 	  && !targetm.have_ptr_extend ())
 	nonzero &= GET_MODE_MASK (ptr_mode);
@@ -4438,22 +4454,12 @@  nonzero_bits1 (const_rtx x, machine_mode
 	return nonzero_for_hook;
       }
 
-    case CONST_INT:
-      /* If X is negative in MODE, sign-extend the value.  */
-      if (SHORT_IMMEDIATES_SIGN_EXTEND && INTVAL (x) > 0
-	  && mode_width < BITS_PER_WORD
-	  && (UINTVAL (x) & (HOST_WIDE_INT_1U << (mode_width - 1)))
-	     != 0)
-	return UINTVAL (x) | (HOST_WIDE_INT_M1U << mode_width);
-
-      return UINTVAL (x);
-
     case MEM:
       /* In many, if not most, RISC machines, reading a byte from memory
 	 zeros the rest of the register.  Noticing that fact saves a lot
 	 of extra zero-extends.  */
-      if (load_extend_op (GET_MODE (x)) == ZERO_EXTEND)
-	nonzero &= GET_MODE_MASK (GET_MODE (x));
+      if (load_extend_op (xmode) == ZERO_EXTEND)
+	nonzero &= GET_MODE_MASK (xmode);
       break;
 
     case EQ:  case NE:
@@ -4470,7 +4476,7 @@  nonzero_bits1 (const_rtx x, machine_mode
 	 operation in, and not the actual operation mode.  We can wind
 	 up with (subreg:DI (gt:V4HI x y)), and we don't have anything
 	 that describes the results of a vector compare.  */
-      if (GET_MODE_CLASS (GET_MODE (x)) == MODE_INT
+      if (GET_MODE_CLASS (xmode) == MODE_INT
 	  && mode_width <= HOST_BITS_PER_WIDE_INT)
 	nonzero = STORE_FLAG_VALUE;
       break;
@@ -4479,21 +4485,19 @@  nonzero_bits1 (const_rtx x, machine_mode
 #if 0
       /* Disabled to avoid exponential mutual recursion between nonzero_bits
 	 and num_sign_bit_copies.  */
-      if (num_sign_bit_copies (XEXP (x, 0), GET_MODE (x))
-	  == GET_MODE_PRECISION (GET_MODE (x)))
+      if (num_sign_bit_copies (XEXP (x, 0), xmode) == xmode_width)
 	nonzero = 1;
 #endif
 
-      if (GET_MODE_PRECISION (GET_MODE (x)) < mode_width)
-	nonzero |= (GET_MODE_MASK (mode) & ~GET_MODE_MASK (GET_MODE (x)));
+      if (xmode_width < mode_width)
+	nonzero |= (GET_MODE_MASK (mode) & ~GET_MODE_MASK (xmode));
       break;
 
     case ABS:
 #if 0
       /* Disabled to avoid exponential mutual recursion between nonzero_bits
 	 and num_sign_bit_copies.  */
-      if (num_sign_bit_copies (XEXP (x, 0), GET_MODE (x))
-	  == GET_MODE_PRECISION (GET_MODE (x)))
+      if (num_sign_bit_copies (XEXP (x, 0), xmode) == xmode_width)
 	nonzero = 1;
 #endif
       break;
@@ -4566,7 +4570,7 @@  nonzero_bits1 (const_rtx x, machine_mode
 	unsigned HOST_WIDE_INT nz1
 	  = cached_nonzero_bits (XEXP (x, 1), mode,
 				 known_x, known_mode, known_ret);
-	int sign_index = GET_MODE_PRECISION (GET_MODE (x)) - 1;
+	int sign_index = xmode_width - 1;
 	int width0 = floor_log2 (nz0) + 1;
 	int width1 = floor_log2 (nz1) + 1;
 	int low0 = ctz_or_zero (nz0);
@@ -4638,8 +4642,8 @@  nonzero_bits1 (const_rtx x, machine_mode
 	 been zero-extended, we know that at least the high-order bits
 	 are zero, though others might be too.  */
       if (SUBREG_PROMOTED_VAR_P (x) && SUBREG_PROMOTED_UNSIGNED_P (x))
-	nonzero = GET_MODE_MASK (GET_MODE (x))
-		  & cached_nonzero_bits (SUBREG_REG (x), GET_MODE (x),
+	nonzero = GET_MODE_MASK (xmode)
+		  & cached_nonzero_bits (SUBREG_REG (x), xmode,
 					 known_x, known_mode, known_ret);
 
       /* If the inner mode is a single word for both the host and target
@@ -4663,10 +4667,8 @@  nonzero_bits1 (const_rtx x, machine_mode
 		   ? val_signbit_known_set_p (inner_mode, nonzero)
 		   : extend_op != ZERO_EXTEND)
 	       || (!MEM_P (SUBREG_REG (x)) && !REG_P (SUBREG_REG (x))))
-	      && GET_MODE_PRECISION (GET_MODE (x))
-		  > GET_MODE_PRECISION (inner_mode))
-	    nonzero
-	      |= (GET_MODE_MASK (GET_MODE (x)) & ~GET_MODE_MASK (inner_mode));
+	      && xmode_width > GET_MODE_PRECISION (inner_mode))
+	    nonzero |= (GET_MODE_MASK (xmode) & ~GET_MODE_MASK (inner_mode));
 	}
       break;
 
@@ -4675,7 +4677,7 @@  nonzero_bits1 (const_rtx x, machine_mode
     case ASHIFT:
     case ROTATE:
       /* The nonzero bits are in two classes: any bits within MODE
-	 that aren't in GET_MODE (x) are always significant.  The rest of the
+	 that aren't in xmode are always significant.  The rest of the
 	 nonzero bits are those that are significant in the operand of
 	 the shift when shifted the appropriate number of bits.  This
 	 shows that high-order bits are cleared by the right shift and
@@ -4683,19 +4685,17 @@  nonzero_bits1 (const_rtx x, machine_mode
       if (CONST_INT_P (XEXP (x, 1))
 	  && INTVAL (XEXP (x, 1)) >= 0
 	  && INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
-	  && INTVAL (XEXP (x, 1)) < GET_MODE_PRECISION (GET_MODE (x)))
+	  && INTVAL (XEXP (x, 1)) < xmode_width)
 	{
-	  machine_mode inner_mode = GET_MODE (x);
-	  unsigned int width = GET_MODE_PRECISION (inner_mode);
 	  int count = INTVAL (XEXP (x, 1));
-	  unsigned HOST_WIDE_INT mode_mask = GET_MODE_MASK (inner_mode);
+	  unsigned HOST_WIDE_INT mode_mask = GET_MODE_MASK (xmode);
 	  unsigned HOST_WIDE_INT op_nonzero
 	    = cached_nonzero_bits (XEXP (x, 0), mode,
 				   known_x, known_mode, known_ret);
 	  unsigned HOST_WIDE_INT inner = op_nonzero & mode_mask;
 	  unsigned HOST_WIDE_INT outer = 0;
 
-	  if (mode_width > width)
+	  if (mode_width > xmode_width)
 	    outer = (op_nonzero & nonzero & ~mode_mask);
 
 	  if (code == LSHIFTRT)
@@ -4707,15 +4707,16 @@  nonzero_bits1 (const_rtx x, machine_mode
 	      /* If the sign bit may have been nonzero before the shift, we
 		 need to mark all the places it could have been copied to
 		 by the shift as possibly nonzero.  */
-	      if (inner & (HOST_WIDE_INT_1U << (width - 1 - count)))
-		inner |= ((HOST_WIDE_INT_1U << count) - 1)
-			   << (width - count);
+	      if (inner & (HOST_WIDE_INT_1U << (xmode_width - 1 - count)))
+		inner |= (((HOST_WIDE_INT_1U << count) - 1)
+			  << (xmode_width - count));
 	    }
 	  else if (code == ASHIFT)
 	    inner <<= count;
 	  else
-	    inner = ((inner << (count % width)
-		      | (inner >> (width - (count % width)))) & mode_mask);
+	    inner = ((inner << (count % xmode_width)
+		      | (inner >> (xmode_width - (count % xmode_width))))
+		     & mode_mask);
 
 	  nonzero &= (outer | inner);
 	}