| Message ID | 1505999838-52530-1-git-send-email-guohanjun@huawei.com |
|---|---|
| Headers | show |
| Series | IORT SMMUv3 MSI support | expand |
On Thu, Sep 21, 2017 at 09:17:14PM +0800, Hanjun Guo wrote: > From: Hanjun Guo <hanjun.guo@linaro.org> > > IORT revision C introduced SMMUv3 MSI support for control interrupts, > which introduced a device ID mapping index to retrieve the dev ID > and ITS parent, adding its support in this patch set, please refer > to each patch for detail commit message. > > RFC v1 -> RFC v2: > - Introduce a new API iort_set_device_domain() to find the MSI domain > for an SMMUv3 (or any other IORT table node) to reduce the complex > of doing that via acpi_configure_pmsi_domain(). > > Hanjun Guo (3): > ACPICA: Add SMMUv3 device ID mapping index support > ACPI: IORT: lookup iort node via fwnode > ACPI: IORT: Skip SMMUv3 device ID map for two steps mappings > > Lorenzo Pieralisi (1): > ACPI: IORT: SMMUv3 nodes MSI support > > drivers/acpi/arm64/iort.c | 157 ++++++++++++++++++++++++++++++++++++++++++++-- > include/acpi/actbl2.h | 1 + > 2 files changed, 152 insertions(+), 6 deletions(-) Please drop RFC tag from this series, comments on respective patches. Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Sep 21, 2017 at 09:17:18PM +0800, Hanjun Guo wrote: > From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Since we make single mappings valid for SMMUv3 (and PMCG), also > we have a mapping index for SMMUv3 MSI, we can directly use that > index to get the map entry, then retrieve dev ID and ITS parent > to add SMMUv3 MSI support. > > Introduce a new API iort_set_device_domain() to find the MSI domain > for an SMMUv3 (or any other IORT table node) to reduce the complex > of doing that via acpi_configure_pmsi_domain(), then reuse the > iort_node_get_id() to get the dev id for SMMU MSI. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> > --- > drivers/acpi/arm64/iort.c | 99 ++++++++++++++++++++++++++++++++++++++--------- > 1 file changed, 81 insertions(+), 18 deletions(-) > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index 269959e..bbab2ab 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -357,7 +357,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, > > if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { > if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || > - node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { > + node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || > + node->type == ACPI_IORT_NODE_SMMU_V3) { > *id_out = map->output_base; > return parent; > } > @@ -366,8 +367,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, > return NULL; > } > > -static int iort_get_smmu_v3_id_mapping_index(struct acpi_iort_node *node, > - u32 *index) > +static int iort_get_id_mapping_index(struct acpi_iort_node *node, > + u32 *index) > { > struct acpi_iort_smmu_v3 *smmu; > > @@ -378,20 +379,28 @@ static int iort_get_smmu_v3_id_mapping_index(struct acpi_iort_node *node, > if (node->revision < 1) > return -EINVAL; > > - smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > - /* if any of the gsi for control interrupts is not 0, ignore the MSI */ > - if (smmu->event_gsiv || smmu->pri_gsiv || smmu->gerr_gsiv > - || smmu->sync_gsiv) > - return -EINVAL; > + switch (node->type) { > + case ACPI_IORT_NODE_SMMU_V3: > + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; > + /* > + * if any of the gsi for control interrupts is not 0, > + * ignore the MSI > + */ > + if (smmu->event_gsiv || smmu->pri_gsiv || smmu->gerr_gsiv > + || smmu->sync_gsiv) > + return -EINVAL; > > - if (smmu->id_mapping_index >= node->mapping_count) { > - pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", > - node, node->type); > + if (smmu->id_mapping_index >= node->mapping_count) { > + pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", > + node, node->type); > + return -EINVAL; > + } > + > + *index = smmu->id_mapping_index; > + return 0; > + default: > return -EINVAL; > } > - > - *index = smmu->id_mapping_index; > - return 0; > } > > static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node, > @@ -431,7 +440,7 @@ static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node, > * associated ID map for single mapping cases. > */ > if (node->type == ACPI_IORT_NODE_SMMU_V3) I wanted to use: iort_get_id_mapping_index() so that the node type check is done *in* that function and you do not need to check it here. > - ret = iort_get_smmu_v3_id_mapping_index(node, &index); > + ret = iort_get_id_mapping_index(node, &index); > > /* Do the ID translation */ > for (i = 0; i < node->mapping_count; i++, map++) { > @@ -555,9 +564,18 @@ int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id) > if (!node) > return -ENODEV; > > - for (i = 0; i < node->mapping_count; i++) { > - if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE, i)) > - return 0; > + if (node->type == ACPI_IORT_NODE_SMMU_V3) { Ditto. > + u32 index; > + > + if (!iort_get_id_mapping_index(node, &index)) { > + if (iort_node_get_id(node, dev_id, index)) > + return 0; > + } > + } else { > + for (i = 0; i < node->mapping_count; i++) { > + if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE, i)) > + return 0; > + } > } > > return -ENODEV; > @@ -620,6 +638,49 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id) > return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI); > } All changes above can be squashed with patch 3. > +static void iort_set_device_domain(struct device *dev, > + struct acpi_iort_node *node) > +{ > + struct acpi_iort_its_group *its; > + struct acpi_iort_node *msi_parent; > + struct acpi_iort_id_mapping *map; > + struct fwnode_handle *iort_fwnode; > + struct irq_domain *domain; > + int ret, index; > + > + ret = iort_get_id_mapping_index(node, &index); > + if (ret < 0) > + return; > + > + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, > + node->mapping_offset + index * sizeof(*map)); > + > + /* Firmware bug! */ > + if (!map->output_reference || > + !(map->flags & ACPI_IORT_ID_SINGLE_MAPPING)) { > + pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n", > + node, node->type); > + return; > + } > + > + msi_parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, > + map->output_reference); > + > + if (!msi_parent || msi_parent->type != ACPI_IORT_NODE_ITS_GROUP) > + return; > + > + /* Move to ITS specific data */ > + its = (struct acpi_iort_its_group *)msi_parent->node_data; > + > + iort_fwnode = iort_find_domain_token(its->identifiers[0]); > + if (!iort_fwnode) > + return; > + > + domain = irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI); > + if (domain) > + dev_set_msi_domain(dev, domain); > +} > + > /** > * iort_get_platform_device_domain() - Find MSI domain related to a > * platform device > @@ -1246,6 +1307,8 @@ static int __init iort_add_smmu_platform_device(struct acpi_iort_node *node) > /* Configure DMA for the page table walker */ > acpi_dma_configure(&pdev->dev, attr); > > + iort_set_device_domain(&pdev->dev, node); > + ..and then you introduce iort_set_device_domain() and use it in a separate patch. With these changes I think we are ready to queue the series. Thanks, Lorenzo > ret = platform_device_add(pdev); > if (ret) > goto dma_deconfigure; > -- > 1.7.12.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/22/2017 09:07 PM, Lorenzo Pieralisi wrote: > On Thu, Sep 21, 2017 at 09:17:18PM +0800, Hanjun Guo wrote: >> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >> >> Since we make single mappings valid for SMMUv3 (and PMCG), also >> we have a mapping index for SMMUv3 MSI, we can directly use that >> index to get the map entry, then retrieve dev ID and ITS parent >> to add SMMUv3 MSI support. >> >> Introduce a new API iort_set_device_domain() to find the MSI domain >> for an SMMUv3 (or any other IORT table node) to reduce the complex >> of doing that via acpi_configure_pmsi_domain(), then reuse the >> iort_node_get_id() to get the dev id for SMMU MSI. >> >> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> >> --- >> drivers/acpi/arm64/iort.c | 99 ++++++++++++++++++++++++++++++++++++++--------- >> 1 file changed, 81 insertions(+), 18 deletions(-) >> >> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c >> index 269959e..bbab2ab 100644 >> --- a/drivers/acpi/arm64/iort.c >> +++ b/drivers/acpi/arm64/iort.c >> @@ -357,7 +357,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, >> >> if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) { >> if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT || >> - node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) { >> + node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX || >> + node->type == ACPI_IORT_NODE_SMMU_V3) { >> *id_out = map->output_base; >> return parent; >> } >> @@ -366,8 +367,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node, >> return NULL; >> } >> >> -static int iort_get_smmu_v3_id_mapping_index(struct acpi_iort_node *node, >> - u32 *index) >> +static int iort_get_id_mapping_index(struct acpi_iort_node *node, >> + u32 *index) >> { >> struct acpi_iort_smmu_v3 *smmu; >> >> @@ -378,20 +379,28 @@ static int iort_get_smmu_v3_id_mapping_index(struct acpi_iort_node *node, >> if (node->revision < 1) >> return -EINVAL; >> >> - smmu = (struct acpi_iort_smmu_v3 *)node->node_data; >> - /* if any of the gsi for control interrupts is not 0, ignore the MSI */ >> - if (smmu->event_gsiv || smmu->pri_gsiv || smmu->gerr_gsiv >> - || smmu->sync_gsiv) >> - return -EINVAL; >> + switch (node->type) { >> + case ACPI_IORT_NODE_SMMU_V3: >> + smmu = (struct acpi_iort_smmu_v3 *)node->node_data; >> + /* >> + * if any of the gsi for control interrupts is not 0, >> + * ignore the MSI >> + */ >> + if (smmu->event_gsiv || smmu->pri_gsiv || smmu->gerr_gsiv >> + || smmu->sync_gsiv) >> + return -EINVAL; >> >> - if (smmu->id_mapping_index >= node->mapping_count) { >> - pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", >> - node, node->type); >> + if (smmu->id_mapping_index >= node->mapping_count) { >> + pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n", >> + node, node->type); >> + return -EINVAL; >> + } >> + >> + *index = smmu->id_mapping_index; >> + return 0; >> + default: >> return -EINVAL; >> } >> - >> - *index = smmu->id_mapping_index; >> - return 0; >> } >> >> static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node, >> @@ -431,7 +440,7 @@ static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node, >> * associated ID map for single mapping cases. >> */ >> if (node->type == ACPI_IORT_NODE_SMMU_V3) > > I wanted to use: > > iort_get_id_mapping_index() > > so that the node type check is done *in* that function and you do > not need to check it here. > >> - ret = iort_get_smmu_v3_id_mapping_index(node, &index); >> + ret = iort_get_id_mapping_index(node, &index); >> >> /* Do the ID translation */ >> for (i = 0; i < node->mapping_count; i++, map++) { >> @@ -555,9 +564,18 @@ int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id) >> if (!node) >> return -ENODEV; >> >> - for (i = 0; i < node->mapping_count; i++) { >> - if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE, i)) >> - return 0; >> + if (node->type == ACPI_IORT_NODE_SMMU_V3) { > > Ditto. > >> + u32 index; >> + >> + if (!iort_get_id_mapping_index(node, &index)) { >> + if (iort_node_get_id(node, dev_id, index)) >> + return 0; >> + } >> + } else { >> + for (i = 0; i < node->mapping_count; i++) { >> + if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE, i)) >> + return 0; >> + } >> } >> >> return -ENODEV; >> @@ -620,6 +638,49 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id) >> return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI); >> } > > All changes above can be squashed with patch 3. > >> +static void iort_set_device_domain(struct device *dev, >> + struct acpi_iort_node *node) >> +{ >> + struct acpi_iort_its_group *its; >> + struct acpi_iort_node *msi_parent; >> + struct acpi_iort_id_mapping *map; >> + struct fwnode_handle *iort_fwnode; >> + struct irq_domain *domain; >> + int ret, index; >> + >> + ret = iort_get_id_mapping_index(node, &index); >> + if (ret < 0) >> + return; >> + >> + map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, >> + node->mapping_offset + index * sizeof(*map)); >> + >> + /* Firmware bug! */ >> + if (!map->output_reference || >> + !(map->flags & ACPI_IORT_ID_SINGLE_MAPPING)) { >> + pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n", >> + node, node->type); >> + return; >> + } >> + >> + msi_parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, >> + map->output_reference); >> + >> + if (!msi_parent || msi_parent->type != ACPI_IORT_NODE_ITS_GROUP) >> + return; >> + >> + /* Move to ITS specific data */ >> + its = (struct acpi_iort_its_group *)msi_parent->node_data; >> + >> + iort_fwnode = iort_find_domain_token(its->identifiers[0]); >> + if (!iort_fwnode) >> + return; >> + >> + domain = irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI); >> + if (domain) >> + dev_set_msi_domain(dev, domain); >> +} >> + >> /** >> * iort_get_platform_device_domain() - Find MSI domain related to a >> * platform device >> @@ -1246,6 +1307,8 @@ static int __init iort_add_smmu_platform_device(struct acpi_iort_node *node) >> /* Configure DMA for the page table walker */ >> acpi_dma_configure(&pdev->dev, attr); >> >> + iort_set_device_domain(&pdev->dev, node); >> + > > ..and then you introduce iort_set_device_domain() and use it in a > separate patch. > > With these changes I think we are ready to queue the series. Updated already, will send a new version soon. Thanks Hanjun -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Hanjun Guo <hanjun.guo@linaro.org> IORT revision C introduced SMMUv3 MSI support for control interrupts, which introduced a device ID mapping index to retrieve the dev ID and ITS parent, adding its support in this patch set, please refer to each patch for detail commit message. RFC v1 -> RFC v2: - Introduce a new API iort_set_device_domain() to find the MSI domain for an SMMUv3 (or any other IORT table node) to reduce the complex of doing that via acpi_configure_pmsi_domain(). Hanjun Guo (3): ACPICA: Add SMMUv3 device ID mapping index support ACPI: IORT: lookup iort node via fwnode ACPI: IORT: Skip SMMUv3 device ID map for two steps mappings Lorenzo Pieralisi (1): ACPI: IORT: SMMUv3 nodes MSI support drivers/acpi/arm64/iort.c | 157 ++++++++++++++++++++++++++++++++++++++++++++-- include/acpi/actbl2.h | 1 + 2 files changed, 152 insertions(+), 6 deletions(-) -- 1.7.12.4 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html