diff mbox series

[3/4] Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus device

Message ID 1647533563-2170-4-git-send-email-mikelley@microsoft.com
State New
Headers show
Series Fix coherence for VMbus and PCI pass-thru devices in Hyper-V VM | expand

Commit Message

Michael Kelley March 17, 2022, 4:12 p.m. UTC 
VMbus synthetic devices are not represented in the ACPI DSDT -- only
the top level VMbus device is represented. As a result, on ARM64
coherence information in the _CCA method is not specified for
synthetic devices, so they default to not hardware coherent.
Drivers for some of these synthetic devices have been recently
updated to use the standard DMA APIs, and they are incurring extra
overhead of unneeded software coherence management.

Fix this by propagating coherence information from the VMbus node
in ACPI to the individual synthetic devices. There's no effect on
x86/x64 where devices are always hardware coherent.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
 drivers/hv/vmbus_drv.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 12a2b37..c0e993ad 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -904,6 +904,21 @@  static int vmbus_probe(struct device *child_device)
 			drv_to_hv_drv(child_device->driver);
 	struct hv_device *dev = device_to_hv_device(child_device);
 	const struct hv_vmbus_device_id *dev_id;
+	enum dev_dma_attr coherent;
+
+	/*
+	 * On ARM64, propagate the DMA coherence setting from the top level
+	 * VMbus ACPI device to the child VMbus device being added here.
+	 * Older Hyper-V ARM64 versions don't set the _CCA method on the
+	 * top level VMbus ACPI device as they should.  Treat these cases
+	 * as DMA coherent since that's the assumption made by Hyper-V.
+	 *
+	 * On x86/x64 these calls assume coherence and have no effect.
+	 */
+	coherent = acpi_get_dma_attr(hv_acpi_dev);
+	if (coherent == DEV_DMA_NOT_SUPPORTED)
+		coherent = DEV_DMA_COHERENT;
+	acpi_dma_configure(child_device, coherent);
 
 	dev_id = hv_vmbus_get_id(drv, dev);
 	if (drv->probe) {