From patchwork Thu Mar 21 11:49:13 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 15459 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id 5CF8E23E10 for ; Thu, 21 Mar 2013 11:50:03 +0000 (UTC) Received: from mail-vc0-f170.google.com (mail-vc0-f170.google.com [209.85.220.170]) by fiordland.canonical.com (Postfix) with ESMTP id D4D3AA18F5E for ; Thu, 21 Mar 2013 11:50:02 +0000 (UTC) Received: by mail-vc0-f170.google.com with SMTP id lf10so2203976vcb.15 for ; Thu, 21 Mar 2013 04:50:02 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-received:x-forwarded-to:x-forwarded-for:delivered-to:x-received :received-spf:from:to:cc:subject:date:message-id:x-mailer :in-reply-to:references:mime-version:content-type:x-gm-message-state; bh=3s5vPCRv+chtaw1ODLj/N1InO8aH2pw6idigyL8Or28=; b=O0W5u2Qxng9qp7p4yS/r+ETKPLAd3xRcQEDz6tgNCRKDBRJh3drge2OYDTelXqgfaP XB+AuCsTSp1xDOwnKRZFrEc2ePSkdP51109a83TE2Axn8Ic7+EeshwMVsN6nWf/pZ7fi AjnMekyJWYmRgQVI+HN9blLMUU2+NXzPIFaNt3qlAO8UI5kH+YASMtMX06/Edt0gfwje hf4qs42PGG0q2LjskrgTj7tPaAl/wp4X6p20fU/7AdsXtGcBYySGPFvfPT1dzZMpR0cO oxNMUX4Zg/OxnFroWZEfS7wAGgUUIBmlgH+sTBja0neenjRl71JrxIJ3hQK3yotcH/RB Jyyw== X-Received: by 10.58.210.200 with SMTP id mw8mr12972082vec.32.1363866602370; Thu, 21 Mar 2013 04:50:02 -0700 (PDT) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.58.233.198 with SMTP id ty6csp56561vec; Thu, 21 Mar 2013 04:50:01 -0700 (PDT) X-Received: by 10.14.0.73 with SMTP id 49mr82101210eea.21.1363866600083; Thu, 21 Mar 2013 04:50:00 -0700 (PDT) Received: from eu1sys200aog125.obsmtp.com (eu1sys200aog125.obsmtp.com [207.126.144.159]) by mx.google.com with SMTP id r7si8261642eeo.210.2013.03.21.04.49.55 (version=TLSv1 cipher=RC4-SHA bits=128/128); Thu, 21 Mar 2013 04:50:00 -0700 (PDT) Received-SPF: neutral (google.com: 207.126.144.159 is neither permitted nor denied by best guess record for domain of linus.walleij@stericsson.com) client-ip=207.126.144.159; Authentication-Results: mx.google.com; spf=neutral (google.com: 207.126.144.159 is neither permitted nor denied by best guess record for domain of linus.walleij@stericsson.com) smtp.mail=linus.walleij@stericsson.com Received: from beta.dmz-eu.st.com ([164.129.1.35]) (using TLSv1) by eu1sys200aob125.postini.com ([207.126.147.11]) with SMTP ID DSNKUUrz4n0NAZTeEXsc6sAZ4rBWtYMRX0He@postini.com; Thu, 21 Mar 2013 11:49:59 UTC Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 16D7A5B; Thu, 21 Mar 2013 11:49:48 +0000 (GMT) Received: from relay2.stm.gmessaging.net (unknown [10.230.100.18]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 86B2F4C35; Thu, 21 Mar 2013 11:49:47 +0000 (GMT) Received: from exdcvycastm004.EQ1STM.local (alteon-source-exch [10.230.100.61]) (using TLSv1 with cipher RC4-MD5 (128/128 bits)) (Client CN "exdcvycastm004", Issuer "exdcvycastm004" (not verified)) by relay2.stm.gmessaging.net (Postfix) with ESMTPS id B076DA8065; Thu, 21 Mar 2013 12:49:42 +0100 (CET) Received: from steludxu4075.lud.stericsson.com (10.230.100.153) by smtp.stericsson.com (10.230.100.2) with Microsoft SMTP Server (TLS) id 8.3.279.5; Thu, 21 Mar 2013 12:49:47 +0100 From: Linus Walleij To: , Arnd Bergmann Cc: Linus Walleij , Samuel Ortiz , Ulf Hansson , Mike Turquette Subject: [PATCH 6/6] ARM: ux500: get rid of Date: Thu, 21 Mar 2013 12:49:13 +0100 Message-ID: <1363866553-15054-7-git-send-email-linus.walleij@stericsson.com> X-Mailer: git-send-email 1.7.11.3 In-Reply-To: <1363866553-15054-1-git-send-email-linus.walleij@stericsson.com> References: <1363866553-15054-1-git-send-email-linus.walleij@stericsson.com> MIME-Version: 1.0 X-Gm-Message-State: ALoCoQmjF4xlaFPJtaGI7neuc+RybInqpa1AX8ZWpA08KIbPomojpPGkMRPIp73XnFVfqLqVjING From: Linus Walleij This removes and from the Ux500, merging them into the local include "db8500-regs.h" in mach-ux500. There is some impact outside the ux500 machine, but most of it is dealt with in earlier patches. Cc: Samuel Ortiz Cc: Ulf Hansson Cc: Mike Turquette Signed-off-by: Linus Walleij --- Sam, Mike: seeking your ACKs to take this through ARM SoC. --- arch/arm/include/debug/ux500.S | 23 ++- arch/arm/mach-ux500/board-mop500-audio.c | 1 - arch/arm/mach-ux500/board-mop500-pins.c | 2 - arch/arm/mach-ux500/board-mop500-sdi.c | 2 +- arch/arm/mach-ux500/board-mop500-uib.c | 1 - arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/cache-l2x0.c | 2 +- arch/arm/mach-ux500/cpu-db8500.c | 4 +- arch/arm/mach-ux500/cpu.c | 2 +- arch/arm/mach-ux500/cpuidle.c | 2 +- arch/arm/mach-ux500/db8500-regs.h | 201 +++++++++++++++++++++++++ arch/arm/mach-ux500/devices-common.c | 1 - arch/arm/mach-ux500/devices-db8500.c | 8 +- arch/arm/mach-ux500/devices-db8500.h | 1 + arch/arm/mach-ux500/devices.c | 3 +- arch/arm/mach-ux500/id.c | 2 +- arch/arm/mach-ux500/include/mach/db8500-regs.h | 173 --------------------- arch/arm/mach-ux500/include/mach/hardware.h | 45 ------ arch/arm/mach-ux500/include/mach/irqs.h | 2 - arch/arm/mach-ux500/include/mach/uncompress.h | 3 +- arch/arm/mach-ux500/platsmp.c | 2 +- arch/arm/mach-ux500/timer.c | 2 +- arch/arm/mach-ux500/usb.c | 2 +- drivers/clk/ux500/clk-prcc.c | 1 - drivers/clocksource/clksrc-dbx500-prcmu.c | 1 - drivers/mfd/db8500-prcmu.c | 2 - drivers/mfd/dbx500-prcmu-regs.h | 22 --- 27 files changed, 239 insertions(+), 273 deletions(-) create mode 100644 arch/arm/mach-ux500/db8500-regs.h delete mode 100644 arch/arm/mach-ux500/include/mach/db8500-regs.h delete mode 100644 arch/arm/mach-ux500/include/mach/hardware.h diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 6703522..2848857 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -8,7 +8,7 @@ * published by the Free Software Foundation. * */ -#include + #if CONFIG_UX500_DEBUG_UART > 2 #error Invalid Ux500 debug UART @@ -21,19 +21,28 @@ */ #ifdef CONFIG_UX500_SOC_DB8500 -#define __UX500_UART(n) U8500_UART##n##_BASE +#define U8500_UART0_PHYS_BASE (0x80120000) +#define U8500_UART1_PHYS_BASE (0x80121000) +#define U8500_UART2_PHYS_BASE (0x80007000) +#define U8500_UART0_VIRT_BASE (0xa8120000) +#define U8500_UART1_VIRT_BASE (0xa8121000) +#define U8500_UART2_VIRT_BASE (0xa8007000) +#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE +#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif -#ifndef __UX500_UART +#if !defined(__UX500_PHYS_UART) || !defined(__UX500_VIRT_UART) #error Unknown SOC #endif -#define UX500_UART(n) __UX500_UART(n) -#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) +#define UX500_PHYS_UART(n) __UX500_PHYS_UART(n) +#define UX500_VIRT_UART(n) __UX500_VIRT_UART(n) +#define UART_PHYS_BASE UX500_PHYS_UART(CONFIG_UX500_DEBUG_UART) +#define UART_VIRT_BASE UX500_VIRT_UART(CONFIG_UX500_DEBUG_UART) .macro addruart, rp, rv, tmp - ldr \rp, =UART_BASE @ no, physical address - ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address + ldr \rp, =UART_PHYS_BASE @ no, physical address + ldr \rv, =UART_VIRT_BASE @ yes, virtual address .endm #include diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 7209db7..c8167bf 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -11,7 +11,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 0a3f30d..f3976f9 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -13,8 +13,6 @@ #include -#include - #include "pins-db8500.h" #include "board-mop500.h" diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 051b62c..0ada767 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -15,8 +15,8 @@ #include #include -#include +#include "db8500-regs.h" #include "devices-db8500.h" #include "board-mop500.h" #include "ste-dma40-db8500.h" diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 7037d36..bdaa422 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -11,7 +11,6 @@ #include #include -#include #include "board-mop500.h" #include "id.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b034578..caad80e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -41,13 +41,13 @@ #include #include -#include #include #include #include #include #include "ste-dma40-db8500.h" +#include "db8500-regs.h" #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 1c1609d..e12cc92 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -9,8 +9,8 @@ #include #include -#include +#include "db8500-regs.h" #include "id.h" static void __iomem *l2x0_base; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8c58dff..d726c06 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -28,15 +28,13 @@ #include #include -#include #include #include -#include #include #include "devices-db8500.h" #include "ste-dma40-db8500.h" - +#include "db8500-regs.h" #include "board-mop500.h" #include "id.h" diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 38459e9..1754041 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -23,11 +23,11 @@ #include -#include #include #include #include "board-mop500.h" +#include "db8500-regs.h" #include "id.h" /* diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index df3c1d3..8e906fb 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -23,7 +23,7 @@ #include #include -#include +#include "db8500-regs.h" /* ARM WFI Standby signal register */ #define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130) diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h new file mode 100644 index 0000000..b2d7a0b --- /dev/null +++ b/arch/arm/mach-ux500/db8500-regs.h @@ -0,0 +1,201 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_DB8500_REGS_H +#define __MACH_DB8500_REGS_H + +/* Base address and bank offsets for ESRAM */ +#define U8500_ESRAM_BASE 0x40000000 +#define U8500_ESRAM_BANK_SIZE 0x00020000 +#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE +#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) +/* + * on V1 DMA uses 4KB for logical parameters position is right after the 64KB + * reserved for security + */ +#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 + +#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) + +/* This address fulfills the 256k alignment requirement of the lcla base */ +#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 + +#define U8500_PER3_BASE 0x80000000 +#define U8500_STM_BASE 0x80100000 +#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_B2R2_BASE 0x80130000 +#define U8500_HSEM_BASE 0x80140000 +#define U8500_PER4_BASE 0x80150000 +#define U8500_TPIU_BASE 0x80190000 +#define U8500_ICN_BASE 0x81000000 + +#define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001D000 + +#define U9540_BOOT_ROM_BASE 0xFFFE0000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U9540_ASIC_ID_BASE 0xFFFFD000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER7_BASE 0xa03d0000 +#define U8500_PER5_BASE 0xa03e0000 + +#define U8500_SVA_BASE 0xa0100000 +#define U8500_SIA_BASE 0xa0200000 + +#define U8500_SGA_BASE 0xa0300000 +#define U8500_MCDE_BASE 0xa0350000 +#define U8500_DMA_BASE 0x801C0000 /* v1 */ + +#define U8500_SBAG_BASE 0xa0390000 + +#define U8500_SCU_BASE 0xa0410000 +#define U8500_GIC_CPU_BASE 0xa0410100 +#define U8500_TWD_BASE 0xa0410600 +#define U8500_GIC_DIST_BASE 0xa0411000 +#define U8500_L2CC_BASE 0xa0412000 + +#define U8500_MODEM_I2C 0xb7e02000 + +#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) +#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) +#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) +#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) + +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) + +/* per6 base addresses */ +#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) +#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) +#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ +#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ +#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ +#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) + +/* per5 base addresses */ +#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) +#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) + +/* per4 base addresses */ +#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) +#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) +#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) +#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) +#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) +#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) +#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) +#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) +#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) +#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) + +/* per3 base addresses */ +#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) +#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) +#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) +#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) +#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) +#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) +#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) + +/* per2 base addresses */ +#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) +#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) +#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) +#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) +#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) +#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) +#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) +#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) +#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) +#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) +#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* per1 base addresses */ +#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) +#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) +#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) +#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) +#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) +#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) +#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) +#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) +#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) + +#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 + +#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE +#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) +#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE +#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) +#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) +#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) +#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE +#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) +#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE + +#define U8500_MCDE_SIZE 0x1000 +#define U8500_DSI_LINK_SIZE 0x1000 +#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) +#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK_COUNT 0x3 + +/* Modem and APE physical addresses */ +#define U8500_MODEM_BASE 0xe000000 +#define U8500_APE_BASE 0x6000000 + +/* SoC identification number information */ +#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) + +/* Offsets to specific addresses in some IP blocks for DMA */ +#define MSP_TX_RX_REG_OFFSET 0 +#define CRYP1_RX_REG_OFFSET 0x10 +#define CRYP1_TX_REG_OFFSET 0x8 +#define HASH1_TX_REG_OFFSET 0x4 + +/* + * Macros to get at IO space when running virtually + * We dont map all the peripherals, let ioremap do + * this for us. We map only very basic peripherals here. + */ +#define U8500_IO_VIRTUAL 0xf0000000 +#define U8500_IO_PHYSICAL 0xa0000000 +/* This is where we map in the ROM to check ASIC IDs */ +#define UX500_VIRT_ROM 0xf0000000 + +/* This macro is used in assembly, so no cast */ +#define IO_ADDRESS(x) \ + (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) + +/* typesafe io address */ +#define __io_address(n) IOMEM(IO_ADDRESS(n)) + +/* Used by some plat-nomadik code */ +#define io_p2v(n) __io_address(n) + +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + +#endif diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index 16b5f71..94868b7 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -13,7 +13,6 @@ #include #include -#include #include #include "devices-common.h" diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index f3d9419..9152aca 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -15,10 +15,10 @@ #include #include -#include #include #include +#include "db8500-regs.h" #include "devices-db8500.h" #include "ste-dma40-db8500.h" @@ -228,6 +228,12 @@ static struct resource db8500_prcmu_res[] = { .end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, + { + .name = "gic-distbase", + .start = U8500_GIC_DIST_BASE, + .end = U8500_GIC_DIST_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, }; struct platform_device db8500_prcmu_device = { diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index dbcb35c..c9db210 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -10,6 +10,7 @@ #include #include +#include "db8500-regs.h" #include "devices-common.h" struct ske_keypad_platform_data; diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c index ea0a2f9..f63a512 100644 --- a/arch/arm/mach-ux500/devices.c +++ b/arch/arm/mach-ux500/devices.c @@ -11,9 +11,10 @@ #include #include -#include #include +#include "db8500-regs.h" + void __init amba_add_devices(struct amba_device *devs[], int num) { int i; diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 9f95184..a847cf2 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -14,9 +14,9 @@ #include #include -#include #include +#include "db8500-regs.h" #include "id.h" struct dbx500_asic_id dbx500_id; diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h deleted file mode 100644 index 1530d49..0000000 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB8500_REGS_H -#define __MACH_DB8500_REGS_H - -/* Base address and bank offsets for ESRAM */ -#define U8500_ESRAM_BASE 0x40000000 -#define U8500_ESRAM_BANK_SIZE 0x00020000 -#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE -#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) -#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) -/* - * on V1 DMA uses 4KB for logical parameters position is right after the 64KB - * reserved for security - */ -#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 - -#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) - -/* This address fulfills the 256k alignment requirement of the lcla base */ -#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 - -#define U8500_PER3_BASE 0x80000000 -#define U8500_STM_BASE 0x80100000 -#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) -#define U8500_PER2_BASE 0x80110000 -#define U8500_PER1_BASE 0x80120000 -#define U8500_B2R2_BASE 0x80130000 -#define U8500_HSEM_BASE 0x80140000 -#define U8500_PER4_BASE 0x80150000 -#define U8500_TPIU_BASE 0x80190000 -#define U8500_ICN_BASE 0x81000000 - -#define U8500_BOOT_ROM_BASE 0x90000000 -/* ASIC ID is at 0xbf4 offset within this region */ -#define U8500_ASIC_ID_BASE 0x9001D000 - -#define U9540_BOOT_ROM_BASE 0xFFFE0000 -/* ASIC ID is at 0xbf4 offset within this region */ -#define U9540_ASIC_ID_BASE 0xFFFFD000 - -#define U8500_PER6_BASE 0xa03c0000 -#define U8500_PER7_BASE 0xa03d0000 -#define U8500_PER5_BASE 0xa03e0000 - -#define U8500_SVA_BASE 0xa0100000 -#define U8500_SIA_BASE 0xa0200000 - -#define U8500_SGA_BASE 0xa0300000 -#define U8500_MCDE_BASE 0xa0350000 -#define U8500_DMA_BASE 0x801C0000 /* v1 */ - -#define U8500_SBAG_BASE 0xa0390000 - -#define U8500_SCU_BASE 0xa0410000 -#define U8500_GIC_CPU_BASE 0xa0410100 -#define U8500_TWD_BASE 0xa0410600 -#define U8500_GIC_DIST_BASE 0xa0411000 -#define U8500_L2CC_BASE 0xa0412000 - -#define U8500_MODEM_I2C 0xb7e02000 - -#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) -#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) -#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) -#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) - -#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) -#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) - -/* per6 base addresses */ -#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) -#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ -#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ -#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ -#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) -#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) - -/* per5 base addresses */ -#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) -#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) - -/* per4 base addresses */ -#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) -#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) -#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) -#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) -#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) -#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) -#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) -#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) -#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) -#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) -#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) -#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) - -/* per3 base addresses */ -#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) -#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) -#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) -#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) -#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) -#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) -#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) -#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) -#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) - -/* per2 base addresses */ -#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) -#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) -#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) -#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) -#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) -#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) -#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) -#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) -#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) -#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) -#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) -#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) - -/* per1 base addresses */ -#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) -#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) -#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) -#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) -#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) -#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) -#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) -#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) -#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) -#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) - -#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 - -#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE -#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) -#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE -#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) -#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) -#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) -#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE -#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) -#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE - -#define U8500_MCDE_SIZE 0x1000 -#define U8500_DSI_LINK_SIZE 0x1000 -#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) -#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) -#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) -#define U8500_DSI_LINK_COUNT 0x3 - -/* Modem and APE physical addresses */ -#define U8500_MODEM_BASE 0xe000000 -#define U8500_APE_BASE 0x6000000 - -/* SoC identification number information */ -#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h deleted file mode 100644 index 4eece2a..0000000 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright (C) 2009 ST-Ericsson. - * - * U8500 hardware definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -/* - * Macros to get at IO space when running virtually - * We dont map all the peripherals, let ioremap do - * this for us. We map only very basic peripherals here. - */ -#define U8500_IO_VIRTUAL 0xf0000000 -#define U8500_IO_PHYSICAL 0xa0000000 -/* This is where we map in the ROM to check ASIC IDs */ -#define UX500_VIRT_ROM 0xf0000000 - -/* This macro is used in assembly, so no cast */ -#define IO_ADDRESS(x) \ - (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) - -/* typesafe io address */ -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -/* Used by some plat-nomadik code */ -#define io_p2v(n) __io_address(n) - -#include - -#define MSP_TX_RX_REG_OFFSET 0 -#define CRYP1_RX_REG_OFFSET 0x10 -#define CRYP1_TX_REG_OFFSET 0x8 -#define HASH1_TX_REG_OFFSET 0x4 - -#ifndef __ASSEMBLY__ - -#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) - -#endif /* __ASSEMBLY__ */ -#endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index fc77b42..829947d 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,8 +10,6 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include - #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 36969d5..533a004 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -22,7 +22,8 @@ #include #include #include -#include +/* TODO: This goes away in multiplatform boot, this file gets deleted */ +#include "../../db8500-regs.h" void __iomem *ux500_uart_base; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af3..8a9c070 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -22,9 +22,9 @@ #include #include -#include #include +#include "db8500-regs.h" #include "id.h" /* This is called from headsmp.S to wakeup the secondary core */ diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index a6af0b8..5b91fac 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -14,9 +14,9 @@ #include #include -#include #include +#include "db8500-regs.h" #include "id.h" #ifdef CONFIG_HAVE_ARM_TWD diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 78ac65f..2dfc72f 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -10,7 +10,7 @@ #include #include -#include +#include "db8500-regs.h" #define MUSB_DMA40_RX_CH { \ .mode = STEDMA40_MODE_LOGICAL, \ diff --git a/drivers/clk/ux500/clk-prcc.c b/drivers/clk/ux500/clk-prcc.c index 7eee7f7..bd4769a 100644 --- a/drivers/clk/ux500/clk-prcc.c +++ b/drivers/clk/ux500/clk-prcc.c @@ -13,7 +13,6 @@ #include #include #include -#include #include "clk.h" diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index c26c369..4f34093 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -18,7 +18,6 @@ #include #include -#include #define RATE_32K 32768 diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 2d3a5f6..03e2aed 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -33,9 +33,7 @@ #include #include #include -#include #include -#include #include "dbx500-prcmu-regs.h" /* Index of different voltages to be used when accessing AVSData */ diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index 439254d..d14836e 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -74,33 +74,11 @@ #define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0) #define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1) -/* ARM WFI Standby signal register */ -#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130) -#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 -#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 -#define PRCM_IOCR (prcmu_base + 0x310) -#define PRCM_IOCR_IOFORCE 0x1 - /* CPU mailbox registers */ #define PRCM_MBOX_CPU_VAL (prcmu_base + 0x0fc) #define PRCM_MBOX_CPU_SET (prcmu_base + 0x100) #define PRCM_MBOX_CPU_CLR (prcmu_base + 0x104) -/* Dual A9 core interrupt management unit registers */ -#define PRCM_A9_MASK_REQ (prcmu_base + 0x328) -#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1 - -#define PRCM_A9_MASK_ACK (prcmu_base + 0x32c) -#define PRCM_ARMITMSK31TO0 (prcmu_base + 0x11c) -#define PRCM_ARMITMSK63TO32 (prcmu_base + 0x120) -#define PRCM_ARMITMSK95TO64 (prcmu_base + 0x124) -#define PRCM_ARMITMSK127TO96 (prcmu_base + 0x128) -#define PRCM_POWER_STATE_VAL (prcmu_base + 0x25C) -#define PRCM_ARMITVAL31TO0 (prcmu_base + 0x260) -#define PRCM_ARMITVAL63TO32 (prcmu_base + 0x264) -#define PRCM_ARMITVAL95TO64 (prcmu_base + 0x268) -#define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C) - #define PRCM_HOSTACCESS_REQ (prcmu_base + 0x334) #define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1 #define PRCM_HOSTACCESS_REQ_WAKE_REQ BIT(16)