From patchwork Wed Aug 26 13:08:01 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lee Jones X-Patchwork-Id: 52723 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-qg0-f72.google.com (mail-qg0-f72.google.com [209.85.192.72]) by patches.linaro.org (Postfix) with ESMTPS id 5706822E9E for ; Wed, 26 Aug 2015 13:11:06 +0000 (UTC) Received: by qgeb6 with SMTP id b6sf231257517qge.0 for ; Wed, 26 Aug 2015 06:11:06 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:delivered-to:from:to:cc:subject :date:message-id:in-reply-to:references:sender:precedence:list-id :x-original-sender:x-original-authentication-results:mailing-list :list-post:list-help:list-archive:list-unsubscribe; bh=UY2QO0AUevYnNg8l3gWgZhKIPyAmgV6OYkr3of0RNdA=; b=DjJzn4XNExdH6lSgA2I8RADvT+kx5yEwn5XIgxJZSeTywINQ5y/Eowqk4BtJZNGoDa KegEdnMqQnsRYqXm6z+HvVqADA1EUY8cfSsADzxcBIEXFkrauHWBrvZQJk4dmAcYWYia Kv1FBn3CevKAyZedxgD6CWxP1WTgs9eMr/Hj/6OC0zPPLWnNNwT2N05tOOfCpqT/E1ER 3QIOjyVArOZTRc/V1IQID7E0vdOFb28BUwBTFxueE19x3O7054hCif+fx4k2tbX3W0Bb ft2JoYAIpTR0TyRhsY/lOgkCREkh9geJCyTvGXk/fYnHQsLEIRs7rF2V2OLgIuKegza7 jFOQ== X-Gm-Message-State: ALoCoQmF4S7+z+RUpic9B644btk7Cf7y9blMBV+7xajtgaUx+M/tA1ZyNI5eTWSeJg8kmEFzsG6q X-Received: by 10.52.165.170 with SMTP id yz10mr34099642vdb.2.1440594666077; Wed, 26 Aug 2015 06:11:06 -0700 (PDT) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.182.71.103 with SMTP id t7ls992252obu.59.gmail; Wed, 26 Aug 2015 06:11:05 -0700 (PDT) X-Received: by 10.55.195.17 with SMTP id a17mr19613554qkj.84.1440594665920; Wed, 26 Aug 2015 06:11:05 -0700 (PDT) Received: from mail-qg0-f45.google.com (mail-qg0-f45.google.com. [209.85.192.45]) by mx.google.com with ESMTPS id m204si38472091qhb.108.2015.08.26.06.11.05 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 26 Aug 2015 06:11:05 -0700 (PDT) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.192.45 as permitted sender) client-ip=209.85.192.45; Received: by qgj62 with SMTP id 62so125632273qgj.2 for ; Wed, 26 Aug 2015 06:11:05 -0700 (PDT) X-Received: by 10.140.131.134 with SMTP id 128mr81787024qhd.44.1440594665758; Wed, 26 Aug 2015 06:11:05 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.55.75.207 with SMTP id y198csp1419336qka; Wed, 26 Aug 2015 06:11:04 -0700 (PDT) X-Received: by 10.50.43.170 with SMTP id x10mr10336415igl.68.1440594664714; Wed, 26 Aug 2015 06:11:04 -0700 (PDT) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id bb5si38555995pdb.94.2015.08.26.06.11.03; Wed, 26 Aug 2015 06:11:04 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756623AbbHZNLB (ORCPT + 28 others); Wed, 26 Aug 2015 09:11:01 -0400 Received: from mail-wi0-f178.google.com ([209.85.212.178]:38215 "EHLO mail-wi0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756130AbbHZNKS (ORCPT ); Wed, 26 Aug 2015 09:10:18 -0400 Received: by wicja10 with SMTP id ja10so14915816wic.1 for ; Wed, 26 Aug 2015 06:10:17 -0700 (PDT) X-Received: by 10.180.182.112 with SMTP id ed16mr12380182wic.19.1440594617160; Wed, 26 Aug 2015 06:10:17 -0700 (PDT) Received: from localhost.localdomain (host81-129-169-167.range81-129.btcentralplus.com. [81.129.169.167]) by smtp.gmail.com with ESMTPSA id o3sm3817050wjx.16.2015.08.26.06.10.16 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 26 Aug 2015 06:10:16 -0700 (PDT) From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: kernel@stlinux.com, ohad@wizery.com, devicetree@vger.kernel.org, Lee Jones Subject: [PATCH 2/4] remoteproc: Supply controller driver for ST's Remote Processors Date: Wed, 26 Aug 2015 14:08:01 +0100 Message-Id: <1440594483-29601-3-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1440594483-29601-1-git-send-email-lee.jones@linaro.org> References: <1440594483-29601-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: lee.jones@linaro.org X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.192.45 as permitted sender) smtp.mailfrom=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Signed-off-by: Lee Jones --- drivers/remoteproc/Kconfig | 9 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/st_remoteproc.c | 300 +++++++++++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/remoteproc/st_remoteproc.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 28c711f..72e97d7 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -77,4 +77,13 @@ config DA8XX_REMOTEPROC It's safe to say n here if you're not interested in multimedia offloading. +config ST_REMOTEPROC + tristate "ST remoteproc support" + depends on ARCH_STI + select REMOTEPROC + help + Say y here to support ST's adjunct processors via the remote + processor framework. + This can be either built-in or a loadable module. + endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 81b04d1..279cb2e 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o +obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c new file mode 100644 index 0000000..7afcfaf --- /dev/null +++ b/drivers/remoteproc/st_remoteproc.c @@ -0,0 +1,300 @@ +/* + * ST's Remote Processor Control Driver + * + * Copyright (C) 2015 STMicroelectronics - All Rights Reserved + * + * Author: Ludovic Barre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct st_rproc_config { + bool sw_reset; + bool pwr_reset; + u32 bootaddr_mask; +}; + +struct st_rproc { + struct st_rproc_config *config; + struct reset_control *sw_reset; + struct reset_control *pwr_reset; + struct clk *clk; + u32 clk_rate; + struct regmap *boot_base; + u32 boot_offset; +}; + +static int st_rproc_stop(struct rproc *rproc) +{ + struct st_rproc *st_rproc = rproc->priv; + int err = 0; + + if (st_rproc->config->sw_reset) { + err = reset_control_assert(st_rproc->sw_reset); + if (err) + dev_warn(&rproc->dev, "Failed to assert S/W Reset\n"); + } + + if (st_rproc->config->pwr_reset) { + err = reset_control_assert(st_rproc->pwr_reset); + if (err) + dev_warn(&rproc->dev, "Failed to assert Power Reset\n"); + } + + clk_disable(st_rproc->clk); + + return 0; +} + +static int st_rproc_start(struct rproc *rproc) +{ + struct st_rproc *st_rproc = rproc->priv; + int err; + + regmap_update_bits(st_rproc->boot_base, st_rproc->boot_offset, + st_rproc->config->bootaddr_mask, rproc->bootaddr); + + err = clk_enable(st_rproc->clk); + if (err) { + dev_err(&rproc->dev, "Failed to enable clock\n"); + return err; + } + + if (st_rproc->config->sw_reset) { + err = reset_control_deassert(st_rproc->sw_reset); + if (err) { + dev_err(&rproc->dev, "Failed to deassert S/W Reset\n"); + return err; + } + } + + if (st_rproc->config->pwr_reset) { + err = reset_control_deassert(st_rproc->pwr_reset); + if (err) { + dev_err(&rproc->dev, "Failed to deassert Power Reset\n"); + return err; + } + } + + dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr); + + return 0; +} + +static struct rproc_ops st_rproc_ops = { + .start = st_rproc_start, + .stop = st_rproc_stop, +}; + +/* + * Fetch state of the processor: 0 is off, 1 is on. + */ +static int st_rproc_state(struct st_rproc *st_rproc) +{ + int reset_sw, reset_pwr; + + reset_sw = st_rproc->config->sw_reset ? + reset_control_status(st_rproc->sw_reset) : 0; + + reset_pwr = st_rproc->config->pwr_reset ? + reset_control_status(st_rproc->pwr_reset) : 0; + + if (reset_sw < 0 || reset_pwr < 0) + return -EINVAL; + + return !reset_sw && !reset_pwr; +} + +static const struct st_rproc_config st40_rproc_cfg = { + .sw_reset = true, + .pwr_reset = true, + .bootaddr_mask = GENMASK(28, 1), +}; + +static const struct st_rproc_config st231_rproc_cfg = { + .sw_reset = true, + .pwr_reset = false, + .bootaddr_mask = GENMASK(31, 6), +}; + +static struct of_device_id st_rproc_match[] = { + { .compatible = "st,st40-rproc", .data = &st40_rproc_cfg }, + { .compatible = "st,st231-rproc", .data = &st231_rproc_cfg }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_rproc_match); + +static int st_rproc_parse_dt(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rproc *rproc = platform_get_drvdata(pdev); + struct st_rproc *st_rproc = rproc->priv; + struct device_node *np = dev->of_node; + struct resource *mem; + int err; + + if (st_rproc->config->sw_reset) { + st_rproc->sw_reset = devm_reset_control_get(dev, "sw_reset"); + if (IS_ERR(st_rproc->sw_reset)) { + dev_err(dev, "Failed to get S/W Reset\n"); + return PTR_ERR(st_rproc->sw_reset); + } + } + + if (st_rproc->config->pwr_reset) { + st_rproc->pwr_reset = devm_reset_control_get(dev, "pwr_reset"); + if (IS_ERR(st_rproc->pwr_reset)) { + dev_err(dev, "Failed to get Power Reset\n"); + return PTR_ERR(st_rproc->pwr_reset); + } + } + + st_rproc->clk = devm_clk_get(dev, "rproc_clk"); + if (IS_ERR(st_rproc->clk)) { + dev_err(dev, "Failed to get clock\n"); + return PTR_ERR(st_rproc->clk); + } + + err = of_property_read_u32(np, "clock-frequency", &st_rproc->clk_rate); + if (err) { + dev_err(dev, "failed to get clock frequency\n"); + return err; + } + + + st_rproc->boot_base = + syscon_regmap_lookup_by_phandle(np, "st,syscfg-boot"); + if (!st_rproc->boot_base) { + dev_err(dev, "Boot base not found\n"); + return -EINVAL; + } + + err = of_property_read_u32_index(np, "st,syscfg-boot", 1, + &st_rproc->boot_offset); + if (err) { + dev_err(dev, "Boot offset not found\n"); + return -EINVAL; + } + + mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "carveout"); + if (!mem) { + dev_err(dev, "no rproc memory definition\n"); + return -ENXIO; + } + + if (!devm_request_mem_region(dev, mem->start, + resource_size(mem), pdev->name)) { + dev_err(dev, "failed to get memory region resource\n"); + return -EBUSY; + } + err = dmam_declare_coherent_memory(dev, mem->start, mem->start, + resource_size(mem), + DMA_MEMORY_MAP | + DMA_MEMORY_EXCLUSIVE); + if (err < 0) { + dev_err(dev, "cannot declare coherent memory: %d\n", err); + return -ENXIO; + } + + err = clk_prepare(st_rproc->clk); + if (err) + dev_err(dev, "failed to get clock\n"); + + return err; +} + +static int st_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct st_rproc *st_rproc; + struct device_node *np = dev->of_node; + struct rproc *rproc; + int enabled; + int ret; + + match = of_match_device((st_rproc_match), dev); + if (!match || !match->data) { + dev_err(dev, "No device match found\n"); + return -ENODEV; + } + + rproc = rproc_alloc(dev, np->name, &st_rproc_ops, + NULL, sizeof(*st_rproc)); + if (!rproc) + return -ENOMEM; + + st_rproc = rproc->priv; + st_rproc->config = (struct st_rproc_config *)match->data; + platform_set_drvdata(pdev, rproc); + + ret = st_rproc_parse_dt(pdev); + if (ret) + goto free_rproc; + + ret = st_rproc_state(st_rproc); + if (ret < 0) + goto free_rproc; + enabled = ret; + + if (enabled) { + atomic_inc(&rproc->power); + rproc->state = RPROC_RUNNING; + } else { + clk_set_rate(st_rproc->clk, st_rproc->clk_rate); + } + + ret = rproc_add(rproc); + if (ret) + goto free_rproc; + + return 0; + +free_rproc: + rproc_put(rproc); + return ret; +} + +static int st_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + struct st_rproc *st_rproc = rproc->priv; + + rproc_del(rproc); + + clk_disable_unprepare(st_rproc->clk); + + rproc_put(rproc); + + return 0; +} + +static struct platform_driver st_rproc_driver = { + .probe = st_rproc_probe, + .remove = st_rproc_remove, + .driver = { + .name = "st-rproc", + .of_match_table = of_match_ptr(st_rproc_match), + }, +}; +module_platform_driver(st_rproc_driver); + +MODULE_DESCRIPTION("ST Remote Processor Control Driver"); +MODULE_AUTHOR("Ludovic.barre "); +MODULE_LICENSE("GPL v2");