From patchwork Wed Sep 7 21:35:00 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stephen Boyd X-Patchwork-Id: 75713 Delivered-To: patch@linaro.org Received: by 10.140.106.11 with SMTP id d11csp527171qgf; Wed, 7 Sep 2016 14:39:49 -0700 (PDT) X-Received: by 10.66.150.39 with SMTP id uf7mr85774881pab.23.1473284389575; Wed, 07 Sep 2016 14:39:49 -0700 (PDT) Return-Path: Received: from bombadil.infradead.org (bombadil.infradead.org. [2001:1868:205::9]) by mx.google.com with ESMTPS id an6si43044696pad.167.2016.09.07.14.39.49 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 07 Sep 2016 14:39:49 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-arm-kernel-bounces+patch=linaro.org@lists.infradead.org designates 2001:1868:205::9 as permitted sender) client-ip=2001:1868:205::9; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org; spf=pass (google.com: best guess record for domain of linux-arm-kernel-bounces+patch=linaro.org@lists.infradead.org designates 2001:1868:205::9 as permitted sender) smtp.mailfrom=linux-arm-kernel-bounces+patch=linaro.org@lists.infradead.org; dmarc=fail (p=NONE dis=NONE) header.from=linaro.org Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.85_2 #1 (Red Hat Linux)) id 1bhkYR-0002h3-KQ; Wed, 07 Sep 2016 21:38:47 +0000 Received: from mail-pa0-x22b.google.com ([2607:f8b0:400e:c03::22b]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1bhkVV-0001H6-Bm for linux-arm-kernel@lists.infradead.org; Wed, 07 Sep 2016 21:35:49 +0000 Received: by mail-pa0-x22b.google.com with SMTP id to9so9973574pac.1 for ; Wed, 07 Sep 2016 14:35:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=6sro4TZzDDMplI/LaUM1Ku9bouFuWwdclMvkp9uBgDQ=; b=TQRCHdlZmTeDYMNnMtXGmLxHhLj2nueYk8jglfRTDGdTojY7fZtphHHm2Wwww+JqoA dPSZgCor0N1jNbuX+Bt5CwqqymdHlbFpA8aXEjKGk5oX1m05iA/wpJHsAwSbo44CDzni 6alwnukwoBuEJOyDa9dm4z4alTNPdN5oWp1Wo= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=6sro4TZzDDMplI/LaUM1Ku9bouFuWwdclMvkp9uBgDQ=; b=fOR4DKRgp7+ZSw5LSez+W1iCCYoK+Yy1sy+NtLU5ZemPgpMPZewALpZEqzpjacaFRW 7owsZHe2A6cSQ7fcVSZDE63Gu60VYu4E6VPZzc6y+F1AsCmX7lfzLyEnFXqXSNSu+F2g m7cyKRIxew2xKAWLmlbAzSNcwjrFu2pwCXUqaTR+KgzE0TJThrApWlxUZFNNH/wwVJXU h/1DzXF9F4oiiWBRYXzbFvW9BV08/E2DJHToC1ZhhMFXRYEk0lkds+raFvwRKnDk6gO1 feNX/9MlLbtgxXlqelHa/f20NZuIFXMVp2Xt5jDEaSG801pQu3mU7klG827qxcDQHPTh 3+Dw== X-Gm-Message-State: AE9vXwMJc9z0fLmZRRAuo3Zf3eTUZXcgnmXExaO+nxvZ1Sd8khc4+qy+8uccip/Wp1ld76fk X-Received: by 10.66.134.10 with SMTP id pg10mr4377594pab.14.1473284125875; Wed, 07 Sep 2016 14:35:25 -0700 (PDT) Received: from localhost.localdomain (ip68-101-172-78.sd.sd.cox.net. [68.101.172.78]) by smtp.gmail.com with ESMTPSA id 75sm51015417pfw.92.2016.09.07.14.35.24 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 07 Sep 2016 14:35:25 -0700 (PDT) From: Stephen Boyd To: linux-usb@vger.kernel.org Subject: [PATCH v4 03/22] usb: ulpi: Support device discovery via DT Date: Wed, 7 Sep 2016 14:35:00 -0700 Message-Id: <20160907213519.27340-4-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.9.0.rc2.8.ga28705d In-Reply-To: <20160907213519.27340-1-stephen.boyd@linaro.org> References: <20160907213519.27340-1-stephen.boyd@linaro.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20160907_143545_537682_79C6D693 X-CRM114-Status: GOOD ( 25.51 ) X-Spam-Score: -2.7 (--) X-Spam-Report: SpamAssassin version 3.4.0 on bombadil.infradead.org summary: Content analysis details: (-2.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low trust [2607:f8b0:400e:c03:0:0:0:22b listed in] [list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Felipe Balbi , Heikki Krogerus , Arnd Bergmann , Neil Armstrong , linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, Bjorn Andersson , devicetree@vger.kernel.org, Rob Herring , Peter Chen , Greg Kroah-Hartman , Andy Gross , linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patch=linaro.org@lists.infradead.org The qcom HSIC ULPI phy doesn't have any bits set in the vendor or product ID registers. This makes it impossible to make a ULPI driver match against the ID registers. Add support to discover the ULPI phys via DT help alleviate this problem. In the DT case, we'll look for a ULPI bus node underneath the device registering the ULPI viewport (or the parent of that device to support chipidea's device layout) and then match up the phy node underneath that with the ULPI device that's created. The side benefit of this is that we can use standard properties in the phy node like clks, regulators, gpios, etc. because we don't have firmware like ACPI to turn these things on for us. And we can use the DT phy binding to point our phy consumer to the phy provider. The ULPI bus code supports native enumeration by reading the vendor ID and product ID registers at device creation time, but we can't be certain that those register reads will succeed if the phy is not powered up. To avoid any problems with reading the ID registers before the phy is powered we fallback to DT matching when the ID reads fail. If the ULPI spec had some generic power sequencing for these registers we could put that into the ULPI bus layer and power up the device before reading the ID registers. Unfortunately this doesn't exist and the power sequence is usually device specific. By having the device matched up with DT we can avoid this problem. Cc: Greg Kroah-Hartman Cc: Heikki Krogerus Cc: Cc: Rob Herring Signed-off-by: Stephen Boyd --- Documentation/devicetree/bindings/usb/ulpi.txt | 20 +++++++ drivers/usb/common/ulpi.c | 77 ++++++++++++++++++++++++-- 2 files changed, 92 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/ulpi.txt -- 2.9.0.rc2.8.ga28705d _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel diff --git a/Documentation/devicetree/bindings/usb/ulpi.txt b/Documentation/devicetree/bindings/usb/ulpi.txt new file mode 100644 index 000000000000..ca179dc4bd50 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ulpi.txt @@ -0,0 +1,20 @@ +ULPI bus binding +---------------- + +Phys that are behind a ULPI connection can be described with the following +binding. The host controller shall have a "ulpi" named node as a child, and +that node shall have one enabled node underneath it representing the ulpi +device on the bus. + +EXAMPLE +------- + +usb { + compatible = "vendor,usb-controller"; + + ulpi { + phy { + compatible = "vendor,phy"; + }; + }; +}; diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index 01c0c0477a9e..24689e05a3df 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include /* -------------------------------------------------------------------------- */ @@ -39,6 +42,10 @@ static int ulpi_match(struct device *dev, struct device_driver *driver) struct ulpi *ulpi = to_ulpi_dev(dev); const struct ulpi_device_id *id; + /* Some ULPI devices don't have a vendor id so rely on OF match */ + if (ulpi->id.vendor == 0) + return of_driver_match_device(dev, driver); + for (id = drv->id_table; id->vendor; id++) if (id->vendor == ulpi->id.vendor && id->product == ulpi->id.product) @@ -50,6 +57,11 @@ static int ulpi_match(struct device *dev, struct device_driver *driver) static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env) { struct ulpi *ulpi = to_ulpi_dev(dev); + int ret; + + ret = of_device_uevent_modalias(dev, env); + if (ret != -ENODEV) + return ret; if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product)) @@ -60,6 +72,11 @@ static int ulpi_uevent(struct device *dev, struct kobj_uevent_env *env) static int ulpi_probe(struct device *dev) { struct ulpi_driver *drv = to_ulpi_driver(dev->driver); + int ret; + + ret = of_clk_set_defaults(dev->of_node, false); + if (ret < 0) + return ret; return drv->probe(to_ulpi_dev(dev)); } @@ -87,8 +104,13 @@ static struct bus_type ulpi_bus = { static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) { + int len; struct ulpi *ulpi = to_ulpi_dev(dev); + len = of_device_get_modalias(dev, buf, PAGE_SIZE - 1); + if (len != -ENODEV) + return len; + return sprintf(buf, "ulpi:v%04xp%04x\n", ulpi->id.vendor, ulpi->id.product); } @@ -152,21 +174,44 @@ EXPORT_SYMBOL_GPL(ulpi_unregister_driver); /* -------------------------------------------------------------------------- */ -static int ulpi_register(struct device *dev, struct ulpi *ulpi) +static int ulpi_of_register(struct ulpi *ulpi) +{ + struct device_node *np = NULL, *child; + + /* Find a ulpi bus underneath the parent or the parent of the parent */ + if (ulpi->dev.parent->of_node) + np = of_find_node_by_name(ulpi->dev.parent->of_node, "ulpi"); + else if (ulpi->dev.parent->parent && ulpi->dev.parent->parent->of_node) + np = of_find_node_by_name(ulpi->dev.parent->parent->of_node, + "ulpi"); + if (!np) + return 0; + + child = of_get_next_available_child(np, NULL); + of_node_put(np); + if (!child) + return -EINVAL; + + ulpi->dev.of_node = child; + + return 0; +} + +static int ulpi_read_id(struct ulpi *ulpi) { int ret; /* Test the interface */ ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); if (ret < 0) - return ret; + goto err; ret = ulpi_read(ulpi, ULPI_SCRATCH); if (ret < 0) - return ret; + goto err; if (ret != 0xaa) - return -ENODEV; + goto err; ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW); ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8; @@ -174,6 +219,21 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; + /* Some ULPI devices don't have a vendor id so rely on OF match */ + if (ulpi->id.vendor == 0) + goto err; + + request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); + + return 0; +err: + return of_device_request_module(&ulpi->dev); +} + +static int ulpi_register(struct device *dev, struct ulpi *ulpi) +{ + int ret; + ulpi->dev.parent = dev; ulpi->dev.bus = &ulpi_bus; ulpi->dev.type = &ulpi_dev_type; @@ -181,7 +241,13 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev)); - request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); + ret = ulpi_of_register(ulpi); + if (ret) + return ret; + + ret = ulpi_read_id(ulpi); + if (ret) + return ret; ret = device_register(&ulpi->dev); if (ret) @@ -232,6 +298,7 @@ EXPORT_SYMBOL_GPL(ulpi_register_interface); */ void ulpi_unregister_interface(struct ulpi *ulpi) { + of_node_put(ulpi->dev.of_node); device_unregister(&ulpi->dev); } EXPORT_SYMBOL_GPL(ulpi_unregister_interface);