| Message ID | 1593766185-16346-1-git-send-email-loic.poulain@linaro.org |
|---|---|
| Headers | show |
| Series | msm8996 CPU scaling support | expand |
On Fri 03 Jul 01:49 PDT 2020, Loic Poulain wrote: > This series is a new tentative for adding MSM8996 CPU scaling support > based on the previous Ilia's series, with some of the latest comments > addressed. > > This series has been tested with dragonboard-820c and cpufreq-bench. > The CPU opps are limited to maximum nominal frequencies (no turbo). > On the board where I usually see issues when we test CPUfreq I see a sudden reboot right before getting a login prompt. I did however conclude that disabling CPU2 and CPU3, so presumably I'm running low on juice when we drive them to highest frequency. I will do some more digging into this and see what's going on. With just CPU0 and 1 enabled this seems to work really well though. Regards, Bjorn > v2: > - Converted dt bindings to YAML > - Various fixes from Stephen inputs > - Removed useless wmb barrier, MODULE_ALIAS > - Use helpers like struct_size() and devm_platform_ioremap_resource() > - Coding style fixes + comments > - Kconfig: remove useless depends > - Added Co-developed-by tag > > v3: > - Added Ilia and Rajendra s-o-b and contribution description > > v4: > - Rebasing on master > - Removing obsolete cooling-min-level and cooling-max-level props > - Align cpu trip nodes names with other boards > - Fix trip types to passive for cpufreq > > v5: > - Fix reported 0-DAY CI issues, read_cpuid_mpidr usage requires ARM64 conf > - Fix cpu_crit node labels > - Dedicated patch for speedbin node name change > - Added patch description for dtsi patch > > Ilia Lin (2): > soc: qcom: Separate kryo l2 accessors from PMU driver > dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 > > Loic Poulain (3): > clk: qcom: Add CPU clock driver for msm8996 > arch: arm64: dts: msm8996: Rename speedbin node > arch: arm64: dts: msm8996: Add CPU opps and thermal > > .../bindings/clock/qcom,msm8996-apcc.yaml | 56 +++ > arch/arm64/boot/dts/qcom/msm8996.dtsi | 310 +++++++++++- > drivers/clk/qcom/Kconfig | 9 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/clk-alpha-pll.h | 6 + > drivers/clk/qcom/clk-cpu-8996.c | 538 +++++++++++++++++++++ > drivers/perf/Kconfig | 1 + > drivers/perf/qcom_l2_pmu.c | 90 +--- > drivers/soc/qcom/Kconfig | 4 + > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/kryo-l2-accessors.c | 57 +++ > include/soc/qcom/kryo-l2-accessors.h | 12 + > 12 files changed, 1012 insertions(+), 73 deletions(-) > create mode 100644 Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml > create mode 100644 drivers/clk/qcom/clk-cpu-8996.c > create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c > create mode 100644 include/soc/qcom/kryo-l2-accessors.h > > -- > 2.7.4
This series is a new tentative for adding MSM8996 CPU scaling support based on the previous Ilia's series, with some of the latest comments addressed. This series has been tested with dragonboard-820c and cpufreq-bench. The CPU opps are limited to maximum nominal frequencies (no turbo). v2: - Converted dt bindings to YAML - Various fixes from Stephen inputs - Removed useless wmb barrier, MODULE_ALIAS - Use helpers like struct_size() and devm_platform_ioremap_resource() - Coding style fixes + comments - Kconfig: remove useless depends - Added Co-developed-by tag v3: - Added Ilia and Rajendra s-o-b and contribution description v4: - Rebasing on master - Removing obsolete cooling-min-level and cooling-max-level props - Align cpu trip nodes names with other boards - Fix trip types to passive for cpufreq v5: - Fix reported 0-DAY CI issues, read_cpuid_mpidr usage requires ARM64 conf - Fix cpu_crit node labels - Dedicated patch for speedbin node name change - Added patch description for dtsi patch Ilia Lin (2): soc: qcom: Separate kryo l2 accessors from PMU driver dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 Loic Poulain (3): clk: qcom: Add CPU clock driver for msm8996 arch: arm64: dts: msm8996: Rename speedbin node arch: arm64: dts: msm8996: Add CPU opps and thermal .../bindings/clock/qcom,msm8996-apcc.yaml | 56 +++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 310 +++++++++++- drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-alpha-pll.h | 6 + drivers/clk/qcom/clk-cpu-8996.c | 538 +++++++++++++++++++++ drivers/perf/Kconfig | 1 + drivers/perf/qcom_l2_pmu.c | 90 +--- drivers/soc/qcom/Kconfig | 4 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/kryo-l2-accessors.c | 57 +++ include/soc/qcom/kryo-l2-accessors.h | 12 + 12 files changed, 1012 insertions(+), 73 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml create mode 100644 drivers/clk/qcom/clk-cpu-8996.c create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c create mode 100644 include/soc/qcom/kryo-l2-accessors.h -- 2.7.4