[v20,0/5] USB DWC3 host wake up support from system suspend

Avoiding phy powerdown in host mode when dwc3 is wakeup capable, so that
it can be wake up by devices. Keep usb30_prim gdsc active to retain
controller status during suspend/resume.

Changes in v20:
Fixed nitpicks in dwc3 qcom driver.
Fixed code changes in dwc3 core driver.

Changes in v19:
Fixed dwc3 driver code changes.

Changes in v18:
Fixed minor nit picks in v17 reported by Matthias.

Changes in v17:
Moved the speed check to glue driver.
Powering down phy's solely based on dwc3 wakeup capability.
Configuring the interrupt functions appropriately.

Changes in v16:
Added changes to power down the phy's during suspend only if dwc3
is not wakeup capable.

Changes in v15:
Added patch to enable wakeup for xhci-plat based on children wakeup status.
Used device_wakeup_path instead of device_children_wakeup_capable

Changes in v14:
Added patch for device_children_wakeup_capable.
Used device_children_wakeup_capable instead of usb_wakeup_enabled_descendants.
Fixed minor nit picks in v13 reported by Matthias.

Changes in v13:
Moved the dt bindings patch to start.
Changed dwc3_set_phy_speed_mode to dwc3_check_phy_speed_mode.
Check wakep-source property for dwc3 core node to set the
wakeup capability. Drop the device_init_wakeup call from
runtime suspend and resume.
Added GENPD_FLAG_RPM_ALWAYS_ON and set GENPD_FLAG_ALWAYS_ON if
wakeup is supported.

Changes in v12:
Squashed PATCH 1/5 and 2/5 of v11.
Added dt bindings and device tree entry for wakeup-source property
for dwc3 core node.
Dropped redundant phy_set_mode call.


Changes in v11:
Moving back to v8 version
https://patchwork.kernel.org/project/linux-arm-msm/cover/1624882097-23265-1-git-send-email-sanm@codeaurora.org
as we are getting interrupts during suspend
when enabling both DP hs phy irq and DM hs phy irq.
Moved the set phy mode function to dwc3/core.c from xhci-plat.c
We didn't find any other option other than accessing xhci from dwc.

Changes in v10:
PATCH 1/6: Change device_set_wakeup_capable to device_set_wakeup_enable
PATCH 2/6: Remove redundant else part in dwc3_resume_common
PATCH 4/6: Change the irg flags
PATCH 5/6: Set flag GENPD_FLAG_ALWAYS_ON
PATCH 6/6: Remove disable interrupts function and enable
interrupts in probe.


Changes in v9:
Checking with device_may_makeup property instead of phy_power_off flag.
Changed the IRQ flags and removed hs_phy_mode variable.

Changes in v8:
Moved the dwc3 suspend quirk code in dwc3/host.c to xhci-plat.c
Checking phy_power_off flag instead of usb_wakeup_enabled_descendants 
to keep gdsc active.

Changes in v7:
Change in commit text and message in PATCH 1/5 and PATCH 5/5
as per Matthias suggestion.
Added curly braces for if and else if sections in PATCH 4/5.

Changes in v6:
Addressed comments in host.c and core.c
Separated the patches in dwc3-qcom.c to make it simple.
Dropped wakeup-source change as it is not related to this series.

Changes in v5:
Added phy_power_off flag to check presence of wakeup capable devices.
Dropped patch[v4,4/5] as it is present linux-next.
Addressed comments in host.c and dwc3-qcom.c.

Changes in v4:
Addressed Matthias comments raised in v3.

Changes in v3:
Removed need_phy_for_wakeup flag and by default avoiding phy powerdown.
Addressed Matthias comments and added entry for DEV_SUPERSPEED.
Added suspend_quirk in dwc3 host and moved the dwc3_set_phy_speed_flags.
Added wakeup-source dt entry and reading in dwc-qcom.c glue driver.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and 
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and 
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.

Sandeep Maheswaram (5):
  dt-bindings: usb: dwc3: Add wakeup-source property support
  usb: dwc3: core: Host wake up support from system suspend
  usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
  usb: dwc3: qcom: Configure wakeup interrupts during suspend
  usb: dwc3: qcom: Keep power domain on to retain controller status

 .../devicetree/bindings/usb/snps,dwc3.yaml         |   5 +
 drivers/usb/dwc3/core.c                            |   9 +-
 drivers/usb/dwc3/dwc3-qcom.c                       | 140 +++++++++++++++------
 3 files changed, 108 insertions(+), 46 deletions(-)