mbox series

[v6,0/3] Add support for secure regions in NAND

Message ID 20210318124342.32745-1-manivannan.sadhasivam@linaro.org
Headers show
Series Add support for secure regions in NAND | expand

Message

Manivannan Sadhasivam March 18, 2021, 12:43 p.m. UTC 
On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So this series adds a property for declaring such secure regions in DT
so that the driver can skip touching them. While at it, the Qcom NANDc
DT binding is also converted to YAML format.

Thanks,
Mani

Changes in v6:

* Made use of "size" of the regions for comparision
* Used "secure" instead of "sec"
* Fixed the sizeof parameter in of_get_nand_secure_regions()

Changes in v5:

* Switched to "uint64-matrix" as suggested by Rob
* Moved the whole logic from qcom driver to nand core as suggested by Boris

Changes in v4:

* Used "uint32-matrix" instead of "uint32-array" as per Rob's review.
* Collected Rob's review tag for binding conversion patch

Changes in v3:

* Removed the nand prefix from DT property and moved the property parsing
  logic before nand_scan() in driver.

Changes in v2:

* Moved the secure-regions property to generic NAND binding as a NAND
  chip property and renamed it as "nand-secure-regions".

Manivannan Sadhasivam (3):
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  dt-bindings: mtd: Add a property to declare secure regions in NAND
    chips
  mtd: rawnand: Add support for secure regions in NAND memory

 .../bindings/mtd/nand-controller.yaml         |   7 +
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 196 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 -------------
 drivers/mtd/nand/raw/nand_base.c              | 111 ++++++++++
 include/linux/mtd/rawnand.h                   |   4 +
 5 files changed, 318 insertions(+), 142 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

-- 
2.25.1