mbox series

[v2,0/4] arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC

Message ID 20210923212311.2877048-1-bjorn.andersson@linaro.org
Headers show
Series arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC | expand

Message

Bjorn Andersson Sept. 23, 2021, 9:23 p.m. UTC 
Describe ADC channels, related thermal monitor channels and add thermal zones for these.

Bjorn Andersson (4):
  dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor
    bindings
  thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
  arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node
  arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones

 .../bindings/thermal/qcom-spmi-adc-tm-hc.yaml | 149 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi          |  10 ++
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts       | 128 +++++++++++++++
 drivers/thermal/qcom/qcom-spmi-adc-tm5.c      |  43 ++++-
 4 files changed, 329 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml

-- 
2.29.2