mbox series

[v9,00/10] PCI: qcom: Fix higher MSI vectors handling

Message ID 20220513131655.2927616-1-dmitry.baryshkov@linaro.org
Headers show
Series PCI: qcom: Fix higher MSI vectors handling | expand

Message

Dmitry Baryshkov May 13, 2022, 1:16 p.m. UTC 
I have replied with my Tested-by to the patch at [2], which has landed
in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom:
Add support for handling MSIs from 8 endpoints"). However lately I
noticed that during the tests I still had 'pcie_pme=nomsi', so the
device was not forced to use higher MSI vectors.

After removing this option I noticed that hight MSI vectors are not
delivered on tested platforms. After additional research I stumbled upon
a patch in msm-4.14 ([1]), which describes that each group of MSI
vectors is mapped to the separate interrupt. Implement corresponding
mapping.

The first patch in the series is a revert of  [2] (landed in pci-next).
Either both patches should be applied or both should be dropped.

Patchseries dependecies: [3] (for the schema change).

Changes since v8:
 - Fix typos noted by Bjorn Helgaas
 - Add missing links to the patch 1 (revert)
 - Fix sm8250 interrupt-names (Johan)
 - Specify num_vectors in qcom configuration data (Johan)
 - Rework parsing of MSI IRQs (Johan)

Changes since v7:
 - Move code back to the dwc core driver (as required by Rob),
 - Change dt schema to require either a single "msi" interrupt or an
   array of "msi0", "msi1", ... "msi7" IRQs. Disallow specifying a
   part of the array (the DT should specify the exact amount of MSI IRQs
   allowing fallback to a single "msi" IRQ),
 - Fix in the DWC init code for the dma_mapping_error() return value.

Changes since v6:
 - Fix indentation of the arguments as requested by Stanimir

Changes since v5:
 - Fixed commit subject and in-comment code according to Bjorn's
   suggestion,
 - Changed variable idx to i to follow dw_handle_msi_irq() style.

Changes since v4:
 - Fix the minItems/maxItems properties in the YAML schema.

Changes since v3:
 - Reimplement MSI handling scheme in the Qualcomm host controller
   driver.

Changes since v2:
 - Fix and rephrase commit message for patch 2.

Changes since v1:
 - Split a huge patch into three patches as suggested by Bjorn Helgaas
 - snps,dw-pcie removal is now part of [3]

[1] https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/commit/671a3d5f129f4bfe477152292ada2194c8440d22
[2] https://lore.kernel.org/linux-arm-msm/20211214101319.25258-1-manivannan.sadhasivam@linaro.org/
[3] https://lore.kernel.org/linux-arm-msm/20220422211002.2012070-1-dmitry.baryshkov@linaro.org/

Dmitry Baryshkov (10):
  PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8
    endpoints"
  PCI: dwc: Propagate error from dma_mapping_error()
  PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
  PCI: dwc: Convert msi_irq to the array
  PCI: dwc: split MSI IRQ parsing/allocation to a separate function
  PCI: dwc: Handle MSIs routed to multiple GIC interrupts
  PCI: dwc: Implement special ISR handler for split MSI IRQ setup
  PCI: qcom: Handle MSIs routed to multiple GIC interrupts
  dt-bindings: PCI: qcom: Support additional MSI interrupts
  arm64: dts: qcom: sm8250: provide additional MSI interrupts

 .../devicetree/bindings/pci/qcom,pcie.yaml    |  53 ++++-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  12 +-
 drivers/pci/controller/dwc/pci-dra7xx.c       |   2 +-
 drivers/pci/controller/dwc/pci-exynos.c       |   2 +-
 .../pci/controller/dwc/pcie-designware-host.c | 213 +++++++++++++-----
 drivers/pci/controller/dwc/pcie-designware.h  |   3 +-
 drivers/pci/controller/dwc/pcie-keembay.c     |   2 +-
 drivers/pci/controller/dwc/pcie-qcom.c        |  14 +-
 drivers/pci/controller/dwc/pcie-spear13xx.c   |   2 +-
 drivers/pci/controller/dwc/pcie-tegra194.c    |   2 +-
 10 files changed, 232 insertions(+), 73 deletions(-)