| Message ID | 20220523175344.5845-1-markuss.broks@gmail.com |
|---|---|
| Headers | show |
| Series | Add support for ToF sensor on Yoshino platform | expand |
On Mon, 23 May 2022 20:53:39 +0300 Markuss Broks <markuss.broks@gmail.com> wrote: > This series adds support for the ToF proximity sensor installed on > Yoshino devices. As part of this series, support handling the reset > GPIO and VDD supply by the VL53L0X driver. Also stop hardcoding the > interrupt type, since on Yoshino devices it seems that edge triggering > doesn't work properly. > > Tested on Sony Xperia XZ1 (poplar). > > Cc: Konrad Dybcio <konrad.dybcio@somainline.org> > Cc: Marijn Suijten <marijn.suijten@somainline.org> > Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Patches 1-4 applied to the togreg branch of iio.git. Note I plan to rebase that tree after the char-misc (and hence IIO tree) has been merged with mainline, so for now it is only pushed out as testing so that 0-day can see if it can find anything we missed. Thanks, Jonathan > > v2: > - Fix a nasty issue: turns out grouping the pinctrl makes it not apply, > which was the main cause of edge interrupts not working correctly and > having to use level interrupts, which caused a large amount of false > detections. > - handle the irq type more gracefully: if it's not provided, default > to falling edge, but if it's provided, then use the provided one. > v3: > - add irq.h header (forgot to commit) > - reword commit message (already initialized -> pre-initialized) > v4: > - reorder powering on and power off action (Jonathan) > - sort pinctrls by GPIO number (Konrad) > v5: > - "This patch adds..." -> "Add ..." (Krzysztof) > > Markuss Broks (5): > dt-bindings: proximity: vl53l0x: Document optional supply and GPIO > properties > proximity: vl53l0x: Get interrupt type from DT > proximity: vl53l0x: Handle the VDD regulator > proximity: vl53l0x: Handle the reset GPIO > arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support > > .../bindings/iio/proximity/st,vl53l0x.yaml | 5 ++ > .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 34 +++++++++++++ > drivers/iio/proximity/vl53l0x-i2c.c | 50 ++++++++++++++++++- > 3 files changed, 88 insertions(+), 1 deletion(-) >
This series adds support for the ToF proximity sensor installed on Yoshino devices. As part of this series, support handling the reset GPIO and VDD supply by the VL53L0X driver. Also stop hardcoding the interrupt type, since on Yoshino devices it seems that edge triggering doesn't work properly. Tested on Sony Xperia XZ1 (poplar). Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> v2: - Fix a nasty issue: turns out grouping the pinctrl makes it not apply, which was the main cause of edge interrupts not working correctly and having to use level interrupts, which caused a large amount of false detections. - handle the irq type more gracefully: if it's not provided, default to falling edge, but if it's provided, then use the provided one. v3: - add irq.h header (forgot to commit) - reword commit message (already initialized -> pre-initialized) v4: - reorder powering on and power off action (Jonathan) - sort pinctrls by GPIO number (Konrad) v5: - "This patch adds..." -> "Add ..." (Krzysztof) Markuss Broks (5): dt-bindings: proximity: vl53l0x: Document optional supply and GPIO properties proximity: vl53l0x: Get interrupt type from DT proximity: vl53l0x: Handle the VDD regulator proximity: vl53l0x: Handle the reset GPIO arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support .../bindings/iio/proximity/st,vl53l0x.yaml | 5 ++ .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 34 +++++++++++++ drivers/iio/proximity/vl53l0x-i2c.c | 50 ++++++++++++++++++- 3 files changed, 88 insertions(+), 1 deletion(-)