mbox series

[v2,0/4] clk: qcom: Drop use of pxo/cxo_board for rpm devices

Message ID 20220706225321.26215-1-ansuelsmth@gmail.com
Headers show
Series clk: qcom: Drop use of pxo/cxo_board for rpm devices | expand

Message

Christian Marangi July 6, 2022, 10:53 p.m. UTC 
Trying to convert every driver used by ipq806x to parent_data api, I notice
RPM was still using pxo_board clk.

pxo and pxo_board are the same clock and are defined just to handle old
clock definition. It was discovered that rpm is the last driver using
pxo_board instead of pxo.

While updating the rpm driver I notice the documentation was also wrong,
so this series also fix that.

v2:
- Add review tag to DTS patch
- Drop clock-output-names patch
- Use pxo/cxo_board clock names
- Remove if nesting from Documentation
- Use min/maxItems in Documentation to describe clocks

Christian Marangi (4):
  dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
  ARM: DTS: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660
  clk: qcom: clk-rpm: convert to parent_data API
  clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxo

 .../devicetree/bindings/clock/qcom,rpmcc.yaml | 85 ++++++++++++++++++-
 arch/arm/boot/dts/qcom-apq8064.dtsi           |  2 +
 arch/arm/boot/dts/qcom-ipq8064.dtsi           |  2 +
 arch/arm/boot/dts/qcom-msm8660.dtsi           |  4 +-
 drivers/clk/qcom/clk-rpm.c                    | 24 ++++--
 drivers/clk/qcom/gcc-ipq806x.c                |  8 --
 6 files changed, 106 insertions(+), 19 deletions(-)