mbox series

[0/4] Qualcomm SDM845 SLPI DSP enablement

Message ID 20230325135114.21688-1-me@dylanvanassche.be
Headers show
Series Qualcomm SDM845 SLPI DSP enablement | expand

Message

Dylan Van Assche March 25, 2023, 1:51 p.m. UTC 
* About *

The Qualcomm SDM845 SoC has a separate SLPI (Sensor Low Power Island)
DSP for sensors connected to the SoC which is responsible for exposing
sensors to userspace, power saving, and other features. 
While sensors are connected to GPIOs of the SoC, they cannot be used
because the hypervisor blocks direct access to the sensors, thus the 
DSP must be used to access any sensor on this SoC. The SLPI DSP uses a
GLink edge (dsps) to communicate with the host and has a FastRPC interface
to load files from the host filesystem such as sensor configuration files.
The FastRPC interface does not use regular FastRPC Compute Banks
but instead uses an allocated CMA region through which communication happens.

* Changes *

This patchseries completes support for the SLPI in the Qualcomm SDM845 SoC
by adding the SLPI to the SDM845 DTS and enable it for 2 hardware devices:
- Oneplus 6
- SHIFTPHONES SHIFT6mq

* Related patches *

1. Remoteproc changes to support the SLPI DSP in SDM845:
https://lore.kernel.org/linux-remoteproc/20230325132117.19733-1-me@dylanvanassche.be/
2. FastRPC changes to support the SLPI DSP in SDM845:
https://lore.kernel.org/linux-arm-msm/20230325134410.21092-1-me@dylanvanassche.be/

This serie does not depend on any serie, but all of them are necessary
to enable the feature in the end.

Kind regards,
Dylan Van Assche

Dylan Van Assche (4):
  dts: arm64: qcom: sdm845: add SLPI remoteproc
  dts: arm64: qcom: sdm845: add SLPI FastRPC support
  dts: arm64: qcom: sdm845-oneplus: enable SLPI
  dts: arm64: qcom: sdm845-shift-axolotl: enable SLPI

 .../boot/dts/qcom/sdm845-oneplus-common.dtsi  |  5 ++
 .../boot/dts/qcom/sdm845-shift-axolotl.dts    |  5 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi          | 61 +++++++++++++++++++
 3 files changed, 71 insertions(+)