mbox series

[v5,0/3] Add devicetree support of Interconnects and USB for SDX75

Message ID 20231117080737.606687-1-quic_rohiagar@quicinc.com
Headers show
Series Add devicetree support of Interconnects and USB for SDX75 | expand

Message

Rohit Agarwal Nov. 17, 2023, 8:07 a.m. UTC 
Hi,

Changes in v5:
 - Rebased on 6.7-rc1.
 - Collected the Ack tag.

Changes in v4:
 - Reordered the interconnect to keep it in sorted order in patch 1/3.

Changes in v3:
 - Using macro QCOM_ICC_TAG_ALWAYS instead of 0 in interconnects properties.
 - Collected reviewed by tag.

Changes in v2:
 - Updated the commit subject of patch 2/3.

This series adds devicetree nodes to support interconnects and usb for sdx75.
This is based on previously sent driver series[1], [2].

[1] https://lore.kernel.org/all/1694614256-24109-1-git-send-email-quic_rohiagar@quicinc.com/
[2] https://lore.kernel.org/all/1695359525-4548-1-git-send-email-quic_rohiagar@quicinc.com/

Thanks,
Rohit.

Rohit Agarwal (3):
  arm64: dts: qcom: Add interconnect nodes for SDX75
  arm64: dts: qcom: Add USB3 and PHY support on SDX75
  arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support

 arch/arm64/boot/dts/qcom/sdx75-idp.dts |  29 +++++
 arch/arm64/boot/dts/qcom/sdx75.dtsi    | 170 +++++++++++++++++++++++++
 2 files changed, 199 insertions(+)

Comments

Dmitry Baryshkov Nov. 17, 2023, 9:41 a.m. UTC | #1 
On Fri, 17 Nov 2023 at 10:07, Rohit Agarwal <quic_rohiagar@quicinc.com> wrote:
>
> Enable the support for USB3 controller, QMP PHY and HS PHY
> on SDX75 IDP.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>




--
With best wishes
Dmitry
Konrad Dybcio Nov. 18, 2023, 1:07 a.m. UTC | #2 
On 17.11.2023 09:07, Rohit Agarwal wrote:
> Add interconnect nodes to support interconnects on SDX75.
> Also parallely add the interconnect property for UART required
> so that the bootup to shell does not break with interconnects
> in place.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Bjorn Andersson Dec. 8, 2023, 2:57 a.m. UTC | #3 
On Fri, 17 Nov 2023 13:37:34 +0530, Rohit Agarwal wrote:
> Changes in v5:
>  - Rebased on 6.7-rc1.
>  - Collected the Ack tag.
> 
> Changes in v4:
>  - Reordered the interconnect to keep it in sorted order in patch 1/3.
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: Add interconnect nodes for SDX75
      commit: ea72a527bd205283db08287cd49737e889788065
[2/3] arm64: dts: qcom: Add USB3 and PHY support on SDX75
      commit: f47303a8d0b50e762930d4d09ea883fd741394ea
[3/3] arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support
      commit: a8db1c061f8b4d6881253640119f651031eb3786

Best regards,