mbox series

[v5,0/2] Enable ethernet for qcs8300

Message ID 20241206-dts_qcs8300-v5-0-422e4fda292d@quicinc.com
Headers show
Series Enable ethernet for qcs8300 | expand

Message

Yijie Yang Dec. 6, 2024, 1:35 a.m. UTC 
Add dts nodes to enable ethernet interface on qcs8300-ride.
The EMAC, SerDes and EPHY version are the same as those in sa8775p.

Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
---
This patch series depends on below patch series:
https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/ - Reviewed
https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@quicinc.com/ - Applied

Changes in v5:
- Pad the register with zero for both 'ethernet0' and 'serdes0'.
- Change PHY name from 'sgmii_phy0' to 'phy0'.
- Link to v4: https://lore.kernel.org/r/20241123-dts_qcs8300-v4-0-b10b8ac634a9@quicinc.com

---
Yijie Yang (2):
      arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
      arm64: dts: qcom: qcs8300-ride: enable ethernet0

 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs8300.dtsi     |  43 ++++++++++++
 2 files changed, 155 insertions(+)
---
base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
change-id: 20241111-dts_qcs8300-f8383ef0f5ef

Best regards,