mbox series

[v4,0/2] Enable SDHC1 and SDHC2 on QCS615

Message ID 20241206023711.2541716-1-quic_yuanjiey@quicinc.com
Headers show
Series Enable SDHC1 and SDHC2 on QCS615 | expand

Message

Yuanjie Yang Dec. 6, 2024, 2:37 a.m. UTC 
Add SDHC1 and SDHC2 support to the QCS615 Ride platform. The
SDHC1 and SDHC2 of QCS615 are derived from SM6115. Include
the configuration of SDHC1-related and SDHC2-related opp,
power, and interconnect settings in the device tree.

Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
---
This patch series depends on below patch series:
https://lore.kernel.org/all/20241104-add_initial_support_for_qcs615-v5-0-9dde8d7b80b0@quicinc.com/
https://lore.kernel.org/all/20241105032107.9552-1-quic_qqzhou@quicinc.com/

Changes in v4:
- Move properties which are not properties of the SoC to board DTS
- Add ice region to SDHC1 Node reg
- Add 50Mhz 200Mhz to SDHC1 opp table, add 50Mhz to SDHC2 opp table 
- fix SDHC2 Node compatible space
- Link to v3: https://lore.kernel.org/all/20241122065101.1918470-1-quic_yuanjiey@quicinc.com/

Changes in v3:
- Improve the commit messages and cover letter
- Link to v2: https://lore.kernel.org/all/20241106072343.2070933-1-quic_yuanjiey@quicinc.com/

Changes in v2:
- Improve the commit messages and cover letter
- Remove applied patches 1
- Pad sdhc_1 node and sdhc_2 node register addresses to 8 hex digits
- Adjust sdhc_1 node and sdhc_2 node register addresses to hexadecimal
- Modify sdhc_2 vqmmc-supply incorrect power configuration
- Link to v1: https://lore.kernel.org/all/20241023092708.604195-1-quic_yuanjiey@quicinc.com/

---
Yuanjie Yang (2):
  arm64: dts: qcom: qcs615: add SDHC1 and SDHC2
  arm64: dts: qcom: qcs615-ride: enable SDHC1 and SDHC2

 arch/arm64/boot/dts/qcom/qcs615-ride.dts |  37 ++++
 arch/arm64/boot/dts/qcom/qcs615.dtsi     | 209 +++++++++++++++++++++++
 2 files changed, 246 insertions(+)