Toggle navigation
Patchwork
linux-arm-msm
Patches
Bundles
About this project
Login
Register
Mail settings
Show patches with
: Submitter =
Dmitry Baryshkov
| State =
Action Required
| Archived =
No
| 1267 patches
Series
Submitter
State
any
Action Required
New
Under Review
Accepted
Rejected
RFC
Not Applicable
Changes Requested
Awaiting Upstream
Superseded
Deferred
Search
Archived
No
Yes
Both
Delegate
------
Nobody
andy.doan@linaro.org
andy.doan@linaro.org
Apply
«
1
2
...
10
11
12
13
»
Patch
Series
S/W/F
Date
Submitter
Delegate
State
[2/2] arm64: dts: qcom: qrb5165-rb5: switch into using GPIO for SPI0 CS
[1/2] arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
-
-
-
2021-02-04
Dmitry Baryshkov
New
[1/2] arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
[1/2] arm64: dts: qcom: sm8250: add pinctrl for SPI using GPIO as a CS
-
-
-
2021-02-04
Dmitry Baryshkov
New
[v2,5/5] arm64: dts: qcom: Add Bluetooth support on RB5
Add support for Qualcomm QCA639x chips family
-
-
-
2021-01-28
Dmitry Baryshkov
New
[v2,4/5] arm64: dtb: qcom: qrb5165-rb5: add bridge@0,0 to power up qca6391 chip
Add support for Qualcomm QCA639x chips family
-
-
-
2021-01-28
Dmitry Baryshkov
New
[v2,3/5] pcie-qcom: provide a way to power up qca6390 chip on RB5 platform
Add support for Qualcomm QCA639x chips family
-
-
-
2021-01-28
Dmitry Baryshkov
New
[v2,2/5] arm64: qcom: dts: qrb5165-rb5: add qca6391 power device
Add support for Qualcomm QCA639x chips family
-
-
-
2021-01-28
Dmitry Baryshkov
New
[v2,1/5] misc: qca639x: add support for QCA639x powerup sequence
Add support for Qualcomm QCA639x chips family
-
-
-
2021-01-28
Dmitry Baryshkov
New
[2/2] arm64: dts: qcom: rb5: Enable PCIe ports and PHY
Enable PCIe support on rb5 platform
-
-
-
2021-01-27
Dmitry Baryshkov
New
[1/2] arm64: dts: qcom: sm8250: Add PCIe suppport
Enable PCIe support on rb5 platform
-
-
-
2021-01-27
Dmitry Baryshkov
New
soc: qcom: socinfo: fix two sparse warnings
soc: qcom: socinfo: fix two sparse warnings
-
-
-
2021-01-18
Dmitry Baryshkov
New
[v3,3/3] drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler
drm/bridge/lontium-lt9611uxc: fix handling of EDID/HPD
-
-
-
2021-01-17
Dmitry Baryshkov
New
[v2] arm64: defconfig: Enable Qualcomm SM8250 audio config
[v2] arm64: defconfig: Enable Qualcomm SM8250 audio config
-
-
-
2021-01-15
Dmitry Baryshkov
New
[v4,2/2] PCI: qcom: add support for ddrss_sf_tbu clock
PCI: qcom: fix PCIe support on sm8250
-
-
-
2021-01-13
Dmitry Baryshkov
New
[v3,2/2] PCI: qcom: add support for ddrss_sf_tbu clock
PCI: qcom: fix PCIe support on sm8250
-
-
-
2020-12-31
Dmitry Baryshkov
New
[v3,1/2] dt-bindings: pci: qcom: Document ddrss_sf_tbu clock for sm8250
PCI: qcom: fix PCIe support on sm8250
-
-
-
2020-12-31
Dmitry Baryshkov
New
[4/4] arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators
regulator: fix pm8009 bindings on sm8250
-
-
-
2020-12-31
Dmitry Baryshkov
New
[v2,2/2] PCI: qcom: add support for ddrss_sf_tbu clock
PCI: qcom: fixup PCIe support on sm8250
-
-
-
2020-12-30
Dmitry Baryshkov
New
[2/3] soc: qcom: socinfo: add several PMIC IDs
[1/3] soc: qcom: socinfo: add qrb5165 SoC ID
-
-
-
2020-12-22
Dmitry Baryshkov
New
[4/4] arm64: dtb: qcom: qrb5165-rb5: add power domain to pcie0 phy
Add support for Qualcomm QCA639x chips family
-
-
-
2020-12-20
Dmitry Baryshkov
New
[v3] dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
[v3] dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
-
-
-
2020-12-11
Dmitry Baryshkov
New
[3/3] arm64: dts: qcom: sm8250: add ddrss_sf_tbu clock to PCIe device nodes
Fixup PCIe support on sm8250
-
-
-
2020-12-08
Dmitry Baryshkov
New
[v10,14/15] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-12-04
Dmitry Baryshkov
New
[v10,11/15] iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-12-04
Dmitry Baryshkov
New
[v10,02/15] fixp-arith: add a linear interpolation function
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-12-04
Dmitry Baryshkov
New
arm64: dts: qcom: sm8250: add CPU capacity and dynamic power properties
arm64: dts: qcom: sm8250: add CPU capacity and dynamic power properties
-
-
-
2020-12-03
Dmitry Baryshkov
New
[2/2] arm64: dts: qcom: sm8250: rename smem device node to follow schema
[1/2] dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
-
-
-
2020-12-03
Dmitry Baryshkov
New
[v2,2/7] arm64: dts: qrb5165-rb5: add mdss/mdp/dsi nodes
[v2,1/7] arm64: dts: qcom: sm8250.dtsi: add display system nodes
-
-
-
2020-12-03
Dmitry Baryshkov
New
[1/2] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available
[1/2] drm/bridge/lontium-lt9611uxc: fix waiting for EDID to become available
-
-
-
2020-11-27
Dmitry Baryshkov
New
[RESEND,1/2] arm64: dts: qcom: enable rtc on qrb5165-rb5 board
[RESEND,1/2] arm64: dts: qcom: enable rtc on qrb5165-rb5 board
-
-
-
2020-11-03
Dmitry Baryshkov
New
[v2,5/5] arm64: dts: qrb5165-rb5: declare tri-led user leds
[v2,1/5] dt-bindings: leds: leds-qcom-lpg: add pm8150[bl] compatible strings
-
-
-
2020-10-30
Dmitry Baryshkov
New
[v2,4/5] arm64: dts: pm8150l: add Light Pulse Generator device node
[v2,1/5] dt-bindings: leds: leds-qcom-lpg: add pm8150[bl] compatible strings
-
-
-
2020-10-30
Dmitry Baryshkov
New
[v2,2/5] leds: qcom-lpg: add support for pm8150[bl] leds
[v2,1/5] dt-bindings: leds: leds-qcom-lpg: add pm8150[bl] compatible strings
-
-
-
2020-10-30
Dmitry Baryshkov
New
[v2,1/5] dt-bindings: leds: leds-qcom-lpg: add pm8150[bl] compatible strings
[v2,1/5] dt-bindings: leds: leds-qcom-lpg: add pm8150[bl] compatible strings
-
-
-
2020-10-30
Dmitry Baryshkov
New
[2/2] arm64: dts: qcom: rb5: Add support for uSD card
[1/2] arm64: dts: qcom: sm8250: Add support for SDC2
-
-
-
2020-10-28
Dmitry Baryshkov
New
[1/2] arm64: dts: qcom: sm8250: Add support for SDC2
[1/2] arm64: dts: qcom: sm8250: Add support for SDC2
-
-
-
2020-10-28
Dmitry Baryshkov
New
arm64: dts: qcom: sm8250: remove wakeup-parent for TLMM node
arm64: dts: qcom: sm8250: remove wakeup-parent for TLMM node
-
-
-
2020-10-27
Dmitry Baryshkov
New
[v2,4/5] arm64: dts: qcom: sm8250: add mmcx regulator
Untitled series #61627
-
-
-
2020-10-23
Dmitry Baryshkov
New
[v2,3/5] arm64: dts: qcom: sm8150: add mmcx regulator
Untitled series #61627
-
-
-
2020-10-23
Dmitry Baryshkov
New
[2/5] leds: qcom-lpg: add support for pm8150[bl] leds
Qualcomm LPG support for PM8150b/l
-
-
-
2020-10-21
Dmitry Baryshkov
New
[v1,2/3] clk: qcom: gdsc: enable external switchable power domain
clk: qcom: handle power domains supplies for GDSC
-
-
-
2020-10-05
Dmitry Baryshkov
New
[v1,1/3] dt-bindings: clock: qcom,dispcc: document power domain bindings
clk: qcom: handle power domains supplies for GDSC
-
-
-
2020-10-05
Dmitry Baryshkov
New
[4/4] arm64: defconfig: enable Qualcomm ADSP Peripheral Image Loader
[1/4] arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
-
-
-
2020-09-17
Dmitry Baryshkov
New
[3/4] arm64: defconfig: enable Qualcomm ASoC modules
[1/4] arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
-
-
-
2020-09-17
Dmitry Baryshkov
New
[1/4] arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
[1/4] arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
-
-
-
2020-09-17
Dmitry Baryshkov
New
arm64: qcom: dts: sm8250: add iommu nodes to qup devices
arm64: qcom: dts: sm8250: add iommu nodes to qup devices
-
-
-
2020-09-17
Dmitry Baryshkov
New
[v5,9/9] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-09-14
Dmitry Baryshkov
New
pinctrl: qcom: sm8250: correct sdc2_clk and ngpios
pinctrl: qcom: sm8250: correct sdc2_clk and ngpios
-
-
-
2020-09-13
Dmitry Baryshkov
New
[RFC,4/4] arm64: dts: qcom: sm8250: pin MMCX to stop the board from crashing
clk: qcom: handle power domains links for GDSC
-
-
-
2020-09-11
Dmitry Baryshkov
New
[RFC,2/4] clk: qcom: gdsc: enable external switchable power domain
clk: qcom: handle power domains links for GDSC
-
-
-
2020-09-11
Dmitry Baryshkov
New
[v4,01/10] iio: adc: qcom-spmi-adc5: fix driver name
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-09-10
Dmitry Baryshkov
New
[v3,02/10] dt-bindings: thermal: qcom: add adc-thermal monitor bindings
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-09-09
Dmitry Baryshkov
New
[v3,2/2] drm: bridge: add support for lontium LT9611UXC bridge
Add LT9611UXC DSI to HDMI bridge support
-
-
-
2020-09-09
Dmitry Baryshkov
New
[v2,9/9] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-09-03
Dmitry Baryshkov
New
[v2,5/9] iio: adc: qcom-spmi-adc5: fix driver name
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-09-03
Dmitry Baryshkov
New
[v2,1/9] dt-bindings: thermal: qcom: add adc-thermal monitor bindings
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-09-03
Dmitry Baryshkov
New
[v2,3/3] drm: bridge: lt9611uxc: support working without DRM_BRIDGE_ATTACH_NO_CONNECTOR
[v2,1/3] dt-bindings: display: bridge: Add documentation for LT9611UXC
-
-
-
2020-08-28
Dmitry Baryshkov
New
[5/5] arm64: dts: sm8250-dts: add thermal zones using pmic's adc-tm5
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-06-21
Dmitry Baryshkov
New
[3/5] thermal: qcom: add support for adc-tm5 PMIC thermal monitor
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-06-21
Dmitry Baryshkov
New
[1/5] dt-bindings: thermal: qcom: add adc-thermal monitor bindings
qcom: pm8150: add support for thermal monitoring
-
-
-
2020-06-21
Dmitry Baryshkov
New
[2/3] arm64: dts: qcom: sm8250-mtp: include pmic files
[1/3] arm64: dts: qcom: pm8009: Add base dts file
-
-
-
2020-06-21
Dmitry Baryshkov
New
[7/7] arm64: dts: qcom: sm8250: add watchdog device
[1/7] arm64: dts: qcom: pm8009: Add base dts file
-
-
-
2020-06-04
Dmitry Baryshkov
New
[6/7] arm64: dts: qcom: pm8150: enable rtc device
[1/7] arm64: dts: qcom: pm8009: Add base dts file
-
-
-
2020-06-04
Dmitry Baryshkov
New
[5/7] arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones
[1/7] arm64: dts: qcom: pm8009: Add base dts file
-
-
-
2020-06-04
Dmitry Baryshkov
New
[4/7] arm64: dts: qcom: sm8x50: add empty thermal zone nodes
[1/7] arm64: dts: qcom: pm8009: Add base dts file
-
-
-
2020-06-04
Dmitry Baryshkov
New
[2/7] arm64: dts: qcom: sm8250: change spmi node label
[1/7] arm64: dts: qcom: pm8009: Add base dts file
-
-
-
2020-06-04
Dmitry Baryshkov
New
defconfig: enable Global Clock Controller for SM8250
defconfig: enable Global Clock Controller for SM8250
-
-
-
2020-05-25
Dmitry Baryshkov
New
[4/4] soc: qcom: socinfo: add SM8250 entry to soc_id array
[1/4] soc: qcom: socinfo: add support for newer socinfo data
-
-
-
2020-05-25
Dmitry Baryshkov
New
«
1
2
...
10
11
12
13
»