Show patches with: Submitter = Abel Vesa       |    State = Action Required       |    Archived = No       |   211 patches
« 1 2 3 »
Patch Series S/W/F Date Submitter Delegate State
[v2] usb: typec: ucsi: Set orientation as none when connector is unplugged [v2] usb: typec: ucsi: Set orientation as none when connector is unplugged --- 2024-12-12 Abel Vesa New
[v4,2/2] arm64: dts: qcom: x1e80100-qcp: Enable SD card support arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP --- 2024-12-12 Abel Vesa New
[v4,1/2] arm64: dts: qcom: x1e80100: Describe the SDHC controllers arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP --- 2024-12-12 Abel Vesa New
[v2,4/4] drm/msm/dp: Add support for LTTPR handling drm/dp: Rework LTTPR transparent mode handling and add support to msm driver --- 2024-12-11 Abel Vesa New
[v2,3/4] drm/i915/dp: Use the generic helper to control LTTPR transparent mode drm/dp: Rework LTTPR transparent mode handling and add support to msm driver --- 2024-12-11 Abel Vesa New
[v2,2/4] drm/nouveau/dp: Use the generic helper to control LTTPR transparent mode drm/dp: Rework LTTPR transparent mode handling and add support to msm driver --- 2024-12-11 Abel Vesa New
[v2,1/4] drm/dp: Add helper to set LTTPRs in transparent mode drm/dp: Rework LTTPR transparent mode handling and add support to msm driver --- 2024-12-11 Abel Vesa New
[v2,2/2] arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6 arm64: dts: qcom: x1e80100: qcp/t14s: Enable USB multi-port controller related ports --- 2024-12-02 Abel Vesa New
[v2,1/2] arm64: dts: qcom: x1e78100-t14s: Enable support for both Type-A USB ports arm64: dts: qcom: x1e80100: qcp/t14s: Enable USB multi-port controller related ports --- 2024-12-02 Abel Vesa New
[3/3] arm64: dts: qcom: x1e80100-pmics: Add missing #address-cells/#size-cells to pmk8550_pon arm64: dts: qcom: x1e80100: Fix missing address/size cells warnings --- 2024-11-08 Abel Vesa New
[2/3] arm64: dts: qcom: x1e80100: Add missing #address-cells/#size-cells to ADSP GPR nodes arm64: dts: qcom: x1e80100: Fix missing address/size cells warnings --- 2024-11-08 Abel Vesa New
[1/3] arm64: dts: qcom: x1e80100: Add missing #address-cells/#size-cells to firmware node arm64: dts: qcom: x1e80100: Fix missing address/size cells warnings --- 2024-11-08 Abel Vesa New
[2/2] arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6 arm64: dts: qcom: x1e80100: qcp/t14s: Enable USB multi-port controller related ports --- 2024-11-05 Abel Vesa New
[1/2] arm64: dts: qcom: x1e78100-t14s: Enable support for both Type-A USB ports arm64: dts: qcom: x1e80100: qcp/t14s: Enable USB multi-port controller related ports --- 2024-11-05 Abel Vesa New
[v4,4/4] arm64: dts: qcom: x1e80100-crd: Enable external DisplayPort support usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-11-01 Abel Vesa New
[v4,3/4] arm64: dts: qcom: x1e80100-crd: Describe the Parade PS8830 retimers usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-11-01 Abel Vesa New
[v4,2/4] usb: typec: Add support for Parade PS8830 Type-C Retimer usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-11-01 Abel Vesa New
[v4,1/4] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-11-01 Abel Vesa New
[v3,2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2 arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP --- 2024-10-22 Abel Vesa New
[v3,1/3] arm64: dts: qcom: x1e80100: Describe the SDHC controllers arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP --- 2024-10-22 Abel Vesa New
[v3,4/4] arm64: dts: qcom: x1e80100-crd: Enable external DP usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-10-22 Abel Vesa New
[v3,2/4] usb: typec: Add support for Parade PS8830 Type-C Retimer usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-10-22 Abel Vesa New
[RFC] usb: typec: ucsi: Set orientation as none when connector is unplugged [RFC] usb: typec: ucsi: Set orientation as none when connector is unplugged --- 2024-10-17 Abel Vesa New
arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller arm64: dts: qcom: x1e80100: Force host dr_mode for usb_2 controller --- 2024-10-14 Abel Vesa New
[v2,2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2 arm64: dts: qcom: x1e80100: Describe SDCs and enable support on QCP --- 2024-10-14 Abel Vesa New
[v2] arm64: dts: qcom: x1e80100: Add Broadcast_AND region in LLCC block [v2] arm64: dts: qcom: x1e80100: Add Broadcast_AND region in LLCC block --- 2024-10-14 Abel Vesa New
[v2,1/2] dt-bindings: usb: Add Parade PS8830 Type-C retimer bindings usb: typec: Add new driver for Parade PS8830 Type-C Retimer --- 2024-10-04 Abel Vesa New
phy: qcom: edp: Add runtime PM support phy: qcom: edp: Add runtime PM support --- 2024-09-07 Abel Vesa New
[1/2] arm64: dts: qcom: x1e80100-crd: Enable external DP support [1/2] arm64: dts: qcom: x1e80100-crd: Enable external DP support --- 2024-09-02 Abel Vesa New
arm64: dts: qcom: x1e80100: Add HS PHY IRQs to USB1 SS[0-2] arm64: dts: qcom: x1e80100: Add HS PHY IRQs to USB1 SS[0-2] --- 2024-08-09 Abel Vesa New
[v3] phy: qcom: qmp-pcie: Configure all tables on port B PHY [v3] phy: qcom: qmp-pcie: Configure all tables on port B PHY --- 2024-08-05 Abel Vesa New
phy: qcom: qmp-pcie: Configure all tables on port B PHY phy: qcom: qmp-pcie: Configure all tables on port B PHY --- 2024-07-26 Abel Vesa New
[v2] arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes [v2] arm64: dts: qcom: x1e80100: Enable tsens and thermal zone nodes --- 2024-06-14 Abel Vesa New
[v2,3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used --- 2024-06-06 Abel Vesa New
dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply --- 2024-06-04 Abel Vesa New
[2/2] arm64: dts: qcom: x1e80100: Make the PCIe 6a PHY support 4 lanes mode arm64: dts: qcom: x1e80100: Fix the PCIe 6a node --- 2024-05-31 Abel Vesa New
clk: qcom: gcc-x1e80100: Fix halt_check for all 3 USB PHY pipe clocks clk: qcom: gcc-x1e80100: Fix halt_check for all 3 USB PHY pipe clocks --- 2024-05-30 Abel Vesa New
[1/2] arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators arm64: dts: qcom: x1e80100: Fix the supplies to the USB1 SS[0-2] PHYs --- 2024-05-30 Abel Vesa New
clk: qcom: dispcc-x1e80100: Drop the reconfiguring of PLL0 on probe clk: qcom: dispcc-x1e80100: Drop the reconfiguring of PLL0 on probe --- 2024-04-18 Abel Vesa New
[v7,5/6] spmi: pmic-arb: Register controller for bus instead of arbiter spmi: pmic-arb: Add support for multiple buses --- 2024-03-29 Abel Vesa New
[v7,4/6] spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Add support for multiple buses --- 2024-03-29 Abel Vesa New
[v7,3/6] spmi: pmic-arb: Make the APID init a version operation spmi: pmic-arb: Add support for multiple buses --- 2024-03-29 Abel Vesa New
[RESEND,v6,5/5] spmi: pmic-arb: Add multi bus support spmi: pmic-arb: Add support for multiple buses --- 2024-03-26 Abel Vesa New
[v3,1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 --- 2024-03-22 Abel Vesa New
[v2,2/3] drm/msm/dp: Add support for setting the eDP mode from devicetree drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 --- 2024-02-22 Abel Vesa New
[v2,1/3] dt-bindings: display: msm: dp-controller: document X1E80100 compatible drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 --- 2024-02-22 Abel Vesa New
[v2,3/4] arm64: dts: qcom: x1e80100-crd: Add repeater nodes arm64: dts: qcom: x1e80100: Add support for eUSB2 repeaters --- 2024-02-21 Abel Vesa New
[v2,1/4] arm64: dts: qcom: x1e80100: Add SPMI support arm64: dts: qcom: x1e80100: Add support for eUSB2 repeaters --- 2024-02-21 Abel Vesa New
[v5,1/4] dt-bindings: spmi: Add PMIC ARB v7 schema spmi: pmic-arb: Add support for multiple buses --- 2024-02-21 Abel Vesa New
[RFC,3/3] drm/msm/dp: Add support for the X1E80100 drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 --- 2024-02-20 Abel Vesa New
[RFC,2/3] drm/msm/dp: Add support for setting the eDP mode from devicetree drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 --- 2024-02-20 Abel Vesa New
arm64: dts: qcom: sm8[56]50: Fix SPMI channels size arm64: dts: qcom: sm8[56]50: Fix SPMI channels size --- 2024-02-20 Abel Vesa New
[RFC,v3,3/4] spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Add support for multiple buses --- 2024-02-14 Abel Vesa New
[v2,3/3] remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP remoteproc: qcom_q6v5_pas: Add aDSP and cDSP for X1E80100 --- 2024-02-12 Abel Vesa New
[v2,2/3] remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP remoteproc: qcom_q6v5_pas: Add aDSP and cDSP for X1E80100 --- 2024-02-12 Abel Vesa New
[RFC,2/2] spmi: pmic-arb: Add support for multi-master spmi: Add multi master support --- 2024-02-06 Abel Vesa New
[RFC,1/2] spmi: Add support for multi-master spmi: Add multi master support --- 2024-02-06 Abel Vesa New
[v4,10/10] clk: qcom: Add camcc clock driver for x1e80100 clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v4,08/10] clk: qcom: Add GPU clock driver for x1e80100 clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v4,07/10] clk: qcom: Add dispcc clock driver for x1e80100 clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v4,06/10] clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v4,05/10] dt-bindings: clock: qcom: Document the X1E80100 Camera Clock Controller clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v4,03/10] dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v4,02/10] dt-bindings: clock: qcom: Document the X1E80100 Display Clock Controller clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-02-02 Abel Vesa New
[v3,1/2] dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller PCI: qcom: Add PCIe support for X1E80100 --- 2024-02-02 Abel Vesa New
[3/3] remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP remoteproc: qcom_q6v5_pas: Add aDSP and cDSP for X1E80100 --- 2024-01-29 Abel Vesa New
[1/3] dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP remoteproc: qcom_q6v5_pas: Add aDSP and cDSP for X1E80100 --- 2024-01-29 Abel Vesa New
[4/5] drm/msm/dp: Try looking for link-frequencies into the port@0's endpoint first drm/msm: Add display support for X1E80100 --- 2024-01-29 Abel Vesa New
[3/5] drm/msm: mdss: Add X1E80100 support drm/msm: Add display support for X1E80100 --- 2024-01-29 Abel Vesa New
[2/5] dt-bindings: display/msm: Document the DPU for X1E80100 drm/msm: Add display support for X1E80100 --- 2024-01-29 Abel Vesa New
[v6,06/11] arm64: dts: qcom: x1e80100: Add USB nodes arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards --- 2024-01-29 Abel Vesa New
[v6,04/11] arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards --- 2024-01-29 Abel Vesa New
[v6,03/11] arm64: dts: qcom: x1e80100: Add QMP AOSS node arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards --- 2024-01-29 Abel Vesa New
[v6,01/11] arm64: dts: qcom: x1e80100: Add IPCC node arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards --- 2024-01-29 Abel Vesa New
[v3,2/2] phy: qcom: edp: Add set_mode op for configuring eDP/DP submode phy: qcom: edp: Allow eDP/DP configuring via set_mode op --- 2024-01-29 Abel Vesa New
[v3,06/10] clk: qcom: clk-alpha-pll: Add support for zonda ole pll configure clk: qcom: Add TCSR, GPU, CAM and DISP clock controllers for X1E80100 --- 2024-01-28 Abel Vesa New
[v5,02/11] arm64: dts: qcom: x1e80100: Add SMP2P nodes arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards --- 2024-01-26 Abel Vesa New
[5/5] clk: qcom: dispcc-sm8650: Drop the Disp AHB DT provided clock clk: qcom: sm8[56]50: Drop the Disp AHB clock from Display Clock Controller --- 2024-01-25 Abel Vesa New
[3/5] arm64: dts: qcom: sm8650: Drop the Disp AHB clock from dispcc node clk: qcom: sm8[56]50: Drop the Disp AHB clock from Display Clock Controller --- 2024-01-25 Abel Vesa New
[2/5] arm64: dts: qcom: sm8550: Drop the Disp AHB clock from dispcc node clk: qcom: sm8[56]50: Drop the Disp AHB clock from Display Clock Controller --- 2024-01-25 Abel Vesa New
[1/5] dt-bindings: clock: sm8550-dispcc: Drop the Disp AHB clock clk: qcom: sm8[56]50: Drop the Disp AHB clock from Display Clock Controller --- 2024-01-25 Abel Vesa New
[v4,4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode PM: domains: Add control for switching back and forth to HW control --- 2024-01-22 Abel Vesa New
[v2,2/2] phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop phy: qualcomm: eusb2-repeater: Some fixes after the regmap rework --- 2024-01-05 Abel Vesa New
[v2,1/2] phy: qualcomm: eusb2-repeater: Fix the regfields for multiple instances phy: qualcomm: eusb2-repeater: Some fixes after the regmap rework --- 2024-01-05 Abel Vesa New
[2/2] phy: qualcomm: eusb2-repeater: Drop the redundant zeroing phy: qualcomm: eusb2-repeater: Some fixes after the regmap rework --- 2024-01-04 Abel Vesa New
[v2,2/2] phy: qcom: edp: Add set_mode op for configuring eDP/DP submode phy: qcom: edp: Allow eDP/DP configuring via set_mode op --- 2023-12-22 Abel Vesa New
[3/3] phy: qcom: edp: Allow PHY mode configuration via devicetree phy: qcom: edp: Add support for DT phy mode configuration --- 2023-12-19 Abel Vesa New
[2/3] phy: Add PHY Embedded DisplayPort mode phy: qcom: edp: Add support for DT phy mode configuration --- 2023-12-19 Abel Vesa New
[1/3] dt-bindings: phy: Add PHY_TYPE_EDP definition phy: qcom: edp: Add support for DT phy mode configuration --- 2023-12-19 Abel Vesa New
[v2,2/2] arm64: dts: qcom: x1e80100: Add some issing nodes for CRD arm64: dts: qcom: Add missing nodes to X1E80100 base dtsi and CRD dts --- 2023-12-14 Abel Vesa New
[v2,1/2] arm64: dts: qcom: x1e80100: Add all missing nodes arm64: dts: qcom: Add missing nodes to X1E80100 base dtsi and CRD dts --- 2023-12-14 Abel Vesa New
[v3,2/3] dt-bindings: phy: qcom-edp: Add X1E80100 PHY compatibles phy: qcom: edp: Add support for X1E80100 --- 2023-12-07 Abel Vesa New
[v2,2/2] phy: qcom: edp: Add X1E80100 eDP and DP PHYs phy: qcom: edp: Add support for X1E80100 --- 2023-12-04 Abel Vesa New
[v2,4/7] phy: qcom-qmp: pcs-usb: Add v7 register offsets [v2,1/7] phy: qcom-qmp: qserdes-com: Add some more v6 register offsets --- 2023-12-04 Abel Vesa New
[1/2] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding [1/2] dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding --- 2023-11-22 Abel Vesa New
[2/2] phy: qcom: snps-eusb2: Add X1E80100 Compatible Untitled series #227941 --- 2023-11-22 Abel Vesa New
[3/7] phy: qcom-qmp: pcs: Add v7 register offsets [1/7] phy: qcom-qmp: qserdes-com: Add some more v6 register offsets --- 2023-11-22 Abel Vesa New
[RESEND,v3,5/5] venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode PM: domains: Add control for switching back and forth to HW control --- 2023-11-01 Abel Vesa New
[RESEND,v3,4/5] clk: qcom: Use HW_CTRL_TRIGGER flag to switch video GDSC to HW mode PM: domains: Add control for switching back and forth to HW control --- 2023-11-01 Abel Vesa New
[RESEND,v3,3/5] clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode PM: domains: Add control for switching back and forth to HW control --- 2023-11-01 Abel Vesa New
« 1 2 3 »