| Message ID | 1701520577-31163-10-git-send-email-quic_cang@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable HS-G5 support on SM8550 | expand |
On 02-12-23, 04:36, Can Guo wrote: > The registers, which are being touched in current SM8550 UFS PHY settings, > and the values being programmed are mainly the ones working for HS-G4 mode, > meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. > However, even consider HS-G4 mode only, some of them are incorrect and some > are missing. Rectify the HS-G4 PHY settings by strictly aligning with the > SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. This fails for me, as I have picked Abels offset series, can you please rebase these two patches and send
Hi Vinod, On 12/22/2023 1:13 AM, Vinod Koul wrote: > On 02-12-23, 04:36, Can Guo wrote: >> The registers, which are being touched in current SM8550 UFS PHY settings, >> and the values being programmed are mainly the ones working for HS-G4 mode, >> meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. >> However, even consider HS-G4 mode only, some of them are incorrect and some >> are missing. Rectify the HS-G4 PHY settings by strictly aligning with the >> SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. > > This fails for me, as I have picked Abels offset series, can you please > rebase these two patches and send > In v8, I rebased the two changes to linux-next. Is the ask there to rebase the two changes to phy/next? Thanks, Can Guo.
On 22-12-23, 15:41, Can Guo wrote: > Hi Vinod, > > On 12/22/2023 1:13 AM, Vinod Koul wrote: > > On 02-12-23, 04:36, Can Guo wrote: > > > The registers, which are being touched in current SM8550 UFS PHY settings, > > > and the values being programmed are mainly the ones working for HS-G4 mode, > > > meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. > > > However, even consider HS-G4 mode only, some of them are incorrect and some > > > are missing. Rectify the HS-G4 PHY settings by strictly aligning with the > > > SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. > > > > This fails for me, as I have picked Abels offset series, can you please > > rebase these two patches and send > > > In v8, I rebased the two changes to linux-next. Is the ask there to rebase > the two changes to phy/next? Yes these two failed to apply for me, pls rebase and post
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index ae220fd..35d497f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -11,6 +11,7 @@ #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 #define QSERDES_UFS_V6_TX_LANE_MODE_1 0x7c +#define QSERDES_UFS_V6_TX_FR_DCC_CTRL 0x108 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 5f79d18..3c2e625 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -763,22 +763,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), @@ -801,6 +805,8 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = { @@ -1357,6 +1363,10 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .pcs = sm8550_ufsphy_pcs, .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), }, + .tbls_hs_b = { + .serdes = sm8550_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l,
The registers, which are being touched in current SM8550 UFS PHY settings, and the values being programmed are mainly the ones working for HS-G4 mode, meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. However, even consider HS-G4 mode only, some of them are incorrect and some are missing. Rectify the HS-G4 PHY settings by strictly aligning with the SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> --- .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 1 + drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 28 +++++++++++++++------- 2 files changed, 20 insertions(+), 9 deletions(-)