From patchwork Thu Sep 1 00:40:36 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stephen Boyd X-Patchwork-Id: 75146 Delivered-To: patch@linaro.org Received: by 10.140.29.8 with SMTP id a8csp20161qga; Wed, 31 Aug 2016 17:42:02 -0700 (PDT) X-Received: by 10.98.192.12 with SMTP id x12mr21897552pff.54.1472690519011; Wed, 31 Aug 2016 17:41:59 -0700 (PDT) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id cj15si2389261pac.175.2016.08.31.17.41.58; Wed, 31 Aug 2016 17:41:59 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-arm-msm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org; spf=pass (google.com: best guess record for domain of linux-arm-msm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-arm-msm-owner@vger.kernel.org; dmarc=fail (p=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754198AbcIAAlx (ORCPT + 8 others); Wed, 31 Aug 2016 20:41:53 -0400 Received: from mail-pa0-f50.google.com ([209.85.220.50]:34649 "EHLO mail-pa0-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933909AbcIAAlF (ORCPT ); Wed, 31 Aug 2016 20:41:05 -0400 Received: by mail-pa0-f50.google.com with SMTP id fi15so23552337pac.1 for ; Wed, 31 Aug 2016 17:41:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=js8P7tZ3kJr5fFnstjMwKAqRKq3NFfxG1cLAdibNLWc=; b=dI+LWr5nku6AD3a2weVbsyts3yTHF300Rshs+2FGI6ZXrUiH5ulqw3Tz/LKcX0hUWF gNetF758oQ9Ow2tOXNG997PRzv/lnfRd3v0nzTyBysYPlAO3aYhzODx1/do0GZHGC0/u VcXdVhRXiM9YYdeuAqqrEgfkb4VEvuyDXhEzQ= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=js8P7tZ3kJr5fFnstjMwKAqRKq3NFfxG1cLAdibNLWc=; b=QrlQxHAWGC8LKP52AEoC64FOM0zInAGIQw2+/uKSisWi7I8L6vIirJ2UEPDVMJJ+Za 5Z7SWau82/ZN7ZZwuzC6fXVNCLflupXZ9gfcHZeqLP1My8tv2zj0SmR9nUqfj75hE4Je 2oirXS2TuDxsX7qHf/UAsB8P0OtHsD95OgMooCh42C3Wi+pMEJvDdyIfYk9L0jhaw85T T1x+pciVY/ulDxz+b5mAO9cBkL9oD//hCC1n6A2uwbONp939gtJBboeH1tvUtBI7dGDL 2oRk9ZaoSQEk/19A9DDVcBXegXkSo78gm4m1N/PjiFcLv/9Y2wVccHI0LsyxAijhOguJ YZuw== X-Gm-Message-State: AE9vXwNyK8McTpihWs/mEHEbmcxpu/AlJ7Pv5lNKhyjS2gel6rDL7qdRd12o/qdLORh/iCTr X-Received: by 10.66.197.131 with SMTP id iu3mr21796007pac.97.1472690460885; Wed, 31 Aug 2016 17:41:00 -0700 (PDT) Received: from localhost.localdomain (i-global254.qualcomm.com. [199.106.103.254]) by smtp.gmail.com with ESMTPSA id m5sm2292303paw.40.2016.08.31.17.40.59 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 31 Aug 2016 17:41:00 -0700 (PDT) From: Stephen Boyd To: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Neil Armstrong , Arnd Bergmann , Felipe Balbi , Peter Chen , Kishon Vijay Abraham I , devicetree@vger.kernel.org Subject: [PATCH v3 22/22] phy: Add support for Qualcomm's USB HS phy Date: Wed, 31 Aug 2016 17:40:36 -0700 Message-Id: <20160901004036.23936-23-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.9.0.rc2.8.ga28705d In-Reply-To: <20160901004036.23936-1-stephen.boyd@linaro.org> References: <20160901004036.23936-1-stephen.boyd@linaro.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The high-speed phy on qcom SoCs is controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I Cc: Signed-off-by: Stephen Boyd --- .../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 83 ++++++ drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-usb-hs.c | 288 +++++++++++++++++++++ 4 files changed, 380 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt create mode 100644 drivers/phy/phy-qcom-usb-hs.c -- 2.9.0.rc2.8.ga28705d -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt new file mode 100644 index 000000000000..d7eacd63d06b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt @@ -0,0 +1,83 @@ +Qualcomm's USB HS PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the + following: + + "qcom,usb-hs-phy-apq8064" + "qcom,usb-hs-phy-msm8916" + "qcom,usb-hs-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: + Definition: Should contain clock specifier for the reference and sleep + clocks + +- clock-names: + Usage: required + Value type: + Definition: Should contain "ref" and "sleep" for the reference and sleep + clocks respectively + +- resets: + Usage: required + Value type: + Definition: Should contain the phy and POR resets + +- reset-names: + Usage: required + Value type: + Definition: Should contain "phy" and "por" for the phy and POR resets + respectively + +- v3p3-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 3.3V supply + +- v1p8-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V supply + +- extcon: + Usage: optional + Value type: + Definition: Should contain the vbus and ID extcons in the first and second + cells respectively + +- qcom,init-seq: + Usage: optional + Value type: + Definition: Should contain a sequence of ULPI register and address pairs to + program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related + to Device Mode Eye Diagram test. + +EXAMPLE + +otg: usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>, <&usb_id>; + qcom,init-seq = /bits/ 8 <0x81 0x63>; + }; + }; +}; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 830c443eeabf..ee0ec021a98c 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -417,6 +417,14 @@ config PHY_QCOM_UFS help Support for UFS PHY on QCOM chipsets. +config PHY_QCOM_USB_HS + tristate "Qualcomm USB HS PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB high-speed ULPI compliant phy on Qualcomm + chipsets. + config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 5422f543d17d..31c84faa07fa 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o +obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o diff --git a/drivers/phy/phy-qcom-usb-hs.c b/drivers/phy/phy-qcom-usb-hs.c new file mode 100644 index 000000000000..ff3917629f2d --- /dev/null +++ b/drivers/phy/phy-qcom-usb-hs.c @@ -0,0 +1,288 @@ +/** + * Copyright (C) 2016 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ulpi_phy.h" + +#define ULPI_PWR_CLK_MNG_REG 0x88 +# define ULPI_PWR_OTG_COMP_DISABLE BIT(0) + +#define ULPI_MISC_A 0x96 +# define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +# define ULPI_MISC_A_VBUSVLDEXT BIT(0) + + +struct ulpi_seq { + u8 addr; + u8 val; +}; + +struct qcom_usb_hs_phy { + struct ulpi *ulpi; + struct phy *phy; + struct clk *ref_clk; + struct clk *sleep_clk; + struct regulator *v1p8; + struct regulator *v3p3; + struct reset_control *reset; + struct ulpi_seq *init_seq; + struct notifier_block vbus_notify; + struct extcon_dev *vbus_edev; + struct extcon_dev *id_edev; + enum usb_dr_mode dr_mode; +}; + +static int +qcom_usb_hs_phy_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct qcom_usb_hs_phy *uphy; + int is_host; + u8 addr; + + uphy = container_of(nb, struct qcom_usb_hs_phy, vbus_notify); + is_host = extcon_get_cable_state_(uphy->id_edev, EXTCON_USB_HOST); + if (is_host < 0) + is_host = 0; /* No id event means always a peripheral */ + + if (event && !is_host) + addr = ULPI_SET(ULPI_MISC_A); + else + addr = ULPI_CLR(ULPI_MISC_A); + + return ulpi_write(uphy->ulpi, addr, + ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT); +} + +static int qcom_usb_hs_phy_power_on(struct phy *phy) +{ + struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); + struct ulpi *ulpi = uphy->ulpi; + const struct ulpi_seq *seq; + int ret, state; + + ret = clk_prepare_enable(uphy->ref_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(uphy->sleep_clk); + if (ret) + goto err_sleep; + + ret = regulator_set_voltage(uphy->v1p8, 1800000, 1800000); + if (ret) + goto err_1p8; + ret = regulator_set_load(uphy->v1p8, 50000); + if (ret < 0) + goto err_1p8; + + ret = regulator_enable(uphy->v1p8); + if (ret) + goto err_1p8; + + ret = regulator_set_voltage_triplet(uphy->v3p3, 3050000, 3300000, + 3300000); + if (ret) + goto err_3p3; + + ret = regulator_set_load(uphy->v3p3, 50000); + if (ret < 0) + goto err_3p3; + + ret = regulator_enable(uphy->v3p3); + if (ret) + goto err_3p3; + + for (seq = uphy->init_seq; seq->addr; seq++) { + ret = ulpi_write(ulpi, seq->addr, seq->val); + if (ret) + goto err_ulpi; + } + + if (uphy->reset) { + ret = reset_control_reset(uphy->reset); + if (ret) + goto err_ulpi; + } + + if (uphy->vbus_edev) { + ulpi_write(ulpi, ULPI_SET(ULPI_PWR_CLK_MNG_REG), + ULPI_PWR_OTG_COMP_DISABLE); + state = extcon_get_cable_state_(uphy->vbus_edev, EXTCON_USB); + /* setup initial state */ + qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state, + uphy->vbus_edev); + ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); + if (ret) + return ret; + } else { + u8 val; + + switch (uphy->dr_mode) { + case USB_DR_MODE_OTG: + val = ULPI_INT_IDGRD; + case USB_DR_MODE_PERIPHERAL: + val |= ULPI_INT_SESS_VALID; + break; + default: + val = 0; + } + + ret = ulpi_write(ulpi, ULPI_USB_INT_EN_RISE, val); + if (ret) + goto err_ulpi; + ret = ulpi_write(ulpi, ULPI_USB_INT_EN_FALL, val); + if (ret) + goto err_ulpi; + } + + return 0; +err_ulpi: + regulator_disable(uphy->v3p3); +err_3p3: + regulator_disable(uphy->v1p8); +err_1p8: + clk_disable_unprepare(uphy->sleep_clk); +err_sleep: + clk_disable_unprepare(uphy->ref_clk); + return ret; +} + +static int qcom_usb_hs_phy_power_off(struct phy *phy) +{ + int ret; + struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); + + if (uphy->vbus_edev) { + ret = extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); + if (ret) + return ret; + } + + regulator_disable(uphy->v3p3); + regulator_disable(uphy->v1p8); + clk_disable_unprepare(uphy->sleep_clk); + clk_disable_unprepare(uphy->ref_clk); + + return 0; +} + +static const struct phy_ops qcom_usb_hs_phy_ops = { + .power_on = qcom_usb_hs_phy_power_on, + .power_off = qcom_usb_hs_phy_power_off, + .owner = THIS_MODULE, +}; + +static int qcom_usb_hs_phy_probe(struct ulpi *ulpi) +{ + struct qcom_usb_hs_phy *uphy; + struct phy_provider *p; + struct clk *clk; + struct regulator *reg; + struct reset_control *reset; + int size; + int ret; + + uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL); + if (!uphy) + return -ENOMEM; + ulpi_set_drvdata(ulpi, uphy); + uphy->ulpi = ulpi; + uphy->dr_mode = of_usb_get_dr_mode_by_phy(ulpi->dev.of_node, -1); + + size = of_property_count_u8_elems(ulpi->dev.of_node, "qcom,init-seq"); + if (size < 0) + size = 0; + uphy->init_seq = devm_kmalloc_array(&ulpi->dev, (size / 2) + 1, + sizeof(*uphy->init_seq), GFP_KERNEL); + if (!uphy->init_seq) + return -ENOMEM; + ret = of_property_read_u8_array(ulpi->dev.of_node, "qcom,init-seq", + (u8 *)uphy->init_seq, size); + if (ret && size) + return ret; + /* NUL terminate */ + uphy->init_seq[size / 2].addr = uphy->init_seq[size / 2].val = 0; + + uphy->ref_clk = clk = devm_clk_get(&ulpi->dev, "ref"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->sleep_clk = clk = devm_clk_get(&ulpi->dev, "sleep"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->v1p8 = reg = devm_regulator_get(&ulpi->dev, "v1p8"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + uphy->v3p3 = reg = devm_regulator_get(&ulpi->dev, "v3p3"); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + uphy->reset = reset = devm_reset_control_get(&ulpi->dev, "por"); + if (IS_ERR(reset)) { + if (PTR_ERR(reset) == -EPROBE_DEFER) + return PTR_ERR(reset); + uphy->reset = NULL; + } + + uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node, + &qcom_usb_hs_phy_ops); + if (IS_ERR(uphy->phy)) + return PTR_ERR(uphy->phy); + + uphy->vbus_edev = extcon_get_edev_by_phandle(&ulpi->dev, 0); + if (IS_ERR(uphy->vbus_edev)) { + if (PTR_ERR(uphy->vbus_edev) != -ENODEV) + return PTR_ERR(uphy->vbus_edev); + uphy->vbus_edev = NULL; + } + + uphy->id_edev = extcon_get_edev_by_phandle(&ulpi->dev, 1); + if (IS_ERR(uphy->id_edev)) { + if (PTR_ERR(uphy->id_edev) != -ENODEV) + return PTR_ERR(uphy->id_edev); + uphy->id_edev = NULL; + } + + uphy->vbus_notify.notifier_call = qcom_usb_hs_phy_vbus_notifier; + phy_set_drvdata(uphy->phy, uphy); + + p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(p); +} + +static const struct of_device_id qcom_usb_hs_phy_match[] = { + { .compatible = "qcom,usb-hs-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_hs_phy_match); + +static struct ulpi_driver qcom_usb_hs_phy_driver = { + .probe = qcom_usb_hs_phy_probe, + .driver = { + .name = "qcom_usb_hs_phy", + .of_match_table = qcom_usb_hs_phy_match, + }, +}; +module_ulpi_driver(qcom_usb_hs_phy_driver); + +MODULE_DESCRIPTION("Qualcomm USB HS phy"); +MODULE_LICENSE("GPL v2");