diff mbox series

[3/3] remoteproc: qcom: Use common SMD edge handler

Message ID 20170130172623.4894-3-bjorn.andersson@linaro.org
State New
Headers show
Series [1/3] remoteproc: qcom-common: Extract non-mdt related helper | expand

Commit Message

Bjorn Andersson Jan. 30, 2017, 5:26 p.m. UTC 
Call the common SMD edge handler to instantiate subdevices to bring
associated SMD edges up and down as the remoteproc is started and
stopped.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
 drivers/remoteproc/Kconfig         | 2 ++
 drivers/remoteproc/qcom_adsp_pil.c | 6 ++++++
 drivers/remoteproc/qcom_q6v5_pil.c | 6 ++++++
 3 files changed, 14 insertions(+)

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 14e57b3e86dc..2c61bd3f73c5 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -76,6 +76,7 @@  config QCOM_ADSP_PIL
 	depends on OF && ARCH_QCOM
 	depends on REMOTEPROC
 	depends on QCOM_SMEM
+	depends on QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n)
 	select MFD_SYSCON
 	select QCOM_MDT_LOADER
 	select QCOM_RPROC_COMMON
@@ -95,6 +96,7 @@  config QCOM_Q6V5_PIL
 	depends on OF && ARCH_QCOM
 	depends on QCOM_SMEM
 	depends on REMOTEPROC
+	depends on QCOM_SMD || (COMPILE_TEST && QCOM_SMD=n)
 	select MFD_SYSCON
 	select QCOM_MDT_LOADER
 	select QCOM_RPROC_COMMON
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index 284546fedb4d..f941a56b233f 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -61,6 +61,8 @@  struct qcom_adsp {
 	phys_addr_t mem_reloc;
 	void *mem_region;
 	size_t mem_size;
+
+	struct qcom_rproc_subdev smd_subdev;
 };
 
 static int adsp_load(struct rproc *rproc, const struct firmware *fw)
@@ -385,6 +387,8 @@  static int adsp_probe(struct platform_device *pdev)
 		goto free_rproc;
 	}
 
+	qcom_add_smd_subdev(rproc, &adsp->smd_subdev);
+
 	ret = rproc_add(rproc);
 	if (ret)
 		goto free_rproc;
@@ -403,6 +407,8 @@  static int adsp_remove(struct platform_device *pdev)
 
 	qcom_smem_state_put(adsp->state);
 	rproc_del(adsp->rproc);
+
+	qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
 	rproc_free(adsp->rproc);
 
 	return 0;
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index cb2073242506..0f197fa103e0 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -153,6 +153,8 @@  struct q6v5 {
 	phys_addr_t mpss_reloc;
 	void *mpss_region;
 	size_t mpss_size;
+
+	struct qcom_rproc_subdev smd_subdev;
 };
 
 static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
@@ -998,6 +1000,8 @@  static int q6v5_probe(struct platform_device *pdev)
 		goto free_rproc;
 	}
 
+	qcom_add_smd_subdev(rproc, &qproc->smd_subdev);
+
 	ret = rproc_add(rproc);
 	if (ret)
 		goto free_rproc;
@@ -1015,6 +1019,8 @@  static int q6v5_remove(struct platform_device *pdev)
 	struct q6v5 *qproc = platform_get_drvdata(pdev);
 
 	rproc_del(qproc->rproc);
+
+	qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
 	rproc_free(qproc->rproc);
 
 	return 0;